Can Arctic Silver 5 be used on an XFX 7600GT?


Recommended Posts

Title is the bottom line. Recently here in L.A. we have some hot weather and because of that my room can become as hot as a sauna. In the evenings it gets cooler but since the building material is asbestos, it traps heat. All the components in my PC stay cool in that heat except for my GPU. It has gotten so hot as I'm typing this post I'm scared to turn it on and don't need confirmation of SpeedFan or Everest either. It felt close to boiling hot and it didn't burn my finger but I flinched on the touch. So is it possible if I can use my AC5 to remove the stock paste/tape and apply it? I can't afford a 3rd party cooler sadly so this may be my only option. I cool it off using frozen butter packages sandwitched between 2 napkins on top and bottom and within minutes becomes the same temperatures.

Specific info on my GPU:

XFX 7600GT XXX edition PVT73AUDE3 AGP 8x

256MB VRAM and PCI-E variant specs unlike the crappier ones back in 2006.

Nvidia Windows 7 WHQL 186.18 Aero enabled and on balanced power plan

System specs are in sig as well.

Thanks

Artic Silver 5 did miracles for me on a Radeon X800GTO that was running way too hot and freezing all the time, I took off the heatsink and cleaned out the solution, applied some AS5 and just like magic there's no more freezing ever. Definitely do it.

BTW Bad news, my fan is dead afterall. I'll apply some tomorrow then thanks. I just wanted to be sure because I remember reading different paste is better for different parts.

Unfortunately It is still hot to the touch even after 2 reapplyings just to be sure it wasn't a fluke. Any ideas whether or not it is worth replacing the stock HSF with this?

If you're going to spend that much on a VGA cooler why not just get a new video card?

http://www.newegg.com/Product/Product.aspx...N82E16814102814

or this could be a cheaper alternative:

http://www.newegg.com/Product/Product.aspx...N82E16835186017

If I were you I'd just replace the video card altogether, something has to be wrong for it to running that hot. Maybe it's still covered by XFX's warranty?

Unfortunately It is still hot to the touch even after 2 reapplyings just to be sure it wasn't a fluke. Any ideas whether or not it is worth replacing the stock HSF with this?

That's a good HSF. Definitely better than stock and a lot better than that dead fan.

If you're going to spend that much on a VGA cooler why not just get a new video card?

http://www.newegg.com/Product/Product.aspx...N82E16814102814

or this could be a cheaper alternative:

http://www.newegg.com/Product/Product.aspx...N82E16835186017

If I were you I'd just replace the video card altogether, something has to be wrong for it to running that hot. Maybe it's still covered by XFX's warranty?

Probably out of warranty now but I'm with you on this one. Half the money spent on a VGA cooler could be applied to say a Radeon 4770 which will run cool and pretty quiet. I helped a friend install one today and it is doing marvels for his gaming now.

If you're going to spend that much on a VGA cooler why not just get a new video card?

http://www.newegg.com/Product/Product.aspx...N82E16814102814

or this could be a cheaper alternative:

http://www.newegg.com/Product/Product.aspx...N82E16835186017

If I were you I'd just replace the video card altogether, something has to be wrong for it to running that hot. Maybe it's still covered by XFX's warranty?

I would do the same but look at how slow the memory interface is for that much VRAM and the DDR2 makes it even worse. I got this one for the speed and at the time and still is today the best bang for your buck. I'd rather stay with this as well since my PSU is pretty much being fully or 90% used. Link to Specs I have an X-Fi XtremeMusic in there as well as a D-Link DGE-530T which has better driver support for Vista than the SiS 900 built in plus I now have Gigabit Full Duplex. My only workaround for now to the temporary passive cooling is to place my room fan next to the tower and I don't mind that but thanks for the suggestions. I doubt my card will be in warranty since I applied AS5 even though it is lifelong.

If you haven't changed the stock cooler then I don't know how XFX could know that you changed the thermal paste.

Just go through with the warranty and see what happens.. If not get a 3rd party heatsink.

Also you never mentioned the temperature of your video card exactly. Is it freezing or artifacting? Check the temperature because video cards normally run hot. My old 8600GT always used to burn me when I touched it but the temps stayed at around 60C and it never gave me any problems. Don't just base off the "overheating" problem by touching the video card.

I'm in Texas and it's been getting over 100 F here lately, and our AC is broke so I have to use a fan and it hardly cools my room but yet my PC temps are alright. :p I'm surprised I haven't passed out or gotten a heatstroke yet.

If you haven't changed the stock cooler then I don't know how XFX could know that you changed the thermal paste.

Just go through with the warranty and see what happens.. If not get a 3rd party heatsink.

Also you never mentioned the temperature of your video card exactly. Is it freezing or artifacting? Check the temperature because video cards normally run hot. My old 8600GT always used to burn me when I touched it but the temps stayed at around 60C and it never gave me any problems. Don't just base off the "overheating" problem by touching the video card.

I'm in Texas and it's been getting over 100 F here lately, and our AC is broke so I have to use a fan and it hardly cools my room but yet my PC temps are alright. :p I'm surprised I haven't passed out or gotten a heatstroke yet.

The SpeedFan temperatures reported as of this post is 70-73^C. No freezing or artifacting has occurred and I am honestly surprised it still works, Aero still works flawlessly. Like I said my room becomes a Sauna reaching temperatures of 110 on a 90 day, the building material is asbestos so it loves to absorb heat. By the time it is night, the room will barely cool down to 75 degrees.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ford execs say they made a mistake when they replaced human engineers with AI by David Uzondu Ford recently announced that over the last three years, it's had to rehire about 350 "gray beard" engineers to mentor younger staff and reprogram diagnostic systems and AI tools that were failing to meet up to quality expectations. The company's VP of vehicle hardware engineering, Charles **** said that leaders overlooked the deep experience of veterans who survived many product cycles. **** admitted that simply replacing them with AI was a huge mistake, and that while AI is "a fantastic tool," it remains "only as good as the information you use to train it." The rehired engineers now run mandatory meetings to troubleshoot vehicles and reprogram automated engineering software and AI tools to prevent glitches before production. These technical specialists hunt for failure points before parts ever reach the plant floor, helping prevent the massive recalls and defects that previously cost the company billions as it aims to cut one billion dollars in expenses this year. In last year's JD Power Quality Survey, an annual study that measures the quality of a car during the first three months of ownership, Ford finished 10th among mainstream brands and scored below the industry average. But this year, JD Power ranked the automaker as the top mainstream brand, placing it above the likes of Toyota Motor Corp. and Honda Motor Co. Ford attributed this massive improvement directly to the expertise of these returned engineers. Ford's realization that AI cannot magically design and test quality vehicles without senior human oversight is just the tip of the iceberg. When Careerminds looked at companies that conducted AI-driven layoffs, researchers found out that 35.6% of those companies had to rehire more than half of the employees they previously fired. Another 32.7% had to rehire between 25% and 50% of them. In 2024, Sebastian Siemiatkowski, CEO of Klarna, proudly announced that its new chatbot was doing the work of 700 full-time customer service agents. As a result, the fintech company froze hiring and cut hundreds of positions. But by mid 2025, and into 2026, Klarna was scrambling to recruit human agents again because customer satisfaction had plummeted. It turns out, while AI is very good at answering basic questions like how to check an account balance, when faced with complex customer issues that require nuance, the thing usually resorts to the unhelpful, robotic corporate jargon we all know and love.
    • Free AI in IDEs is shifting to paid models Or you know, you could just learn to actually design and code apps, use frameworks to handle the repetitive parts and not use AI at all - and voila... free for life!
    • In a sane world US antitrust laws wouldn't even allow these companies to be in the position to be subjected to EU directives. As you say, better than oligarch nothing.
    • Apple reportedly has a second-generation iPhone Fold planned for 2027 Good grief, Apple hasn't even released a first folding phone and the Apple faithful is already obsessing over the sequel? Seriously people, go out and touch grass... because this level of obsession is borderline stalkery/neurotic.
    • I checked on the IPs associated with every login and they're all mine... And whenever I get a new prompt, there is no activity to show for it. 
  • Recent Achievements

    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!