Can Arctic Silver 5 be used on an XFX 7600GT?


Recommended Posts

Title is the bottom line. Recently here in L.A. we have some hot weather and because of that my room can become as hot as a sauna. In the evenings it gets cooler but since the building material is asbestos, it traps heat. All the components in my PC stay cool in that heat except for my GPU. It has gotten so hot as I'm typing this post I'm scared to turn it on and don't need confirmation of SpeedFan or Everest either. It felt close to boiling hot and it didn't burn my finger but I flinched on the touch. So is it possible if I can use my AC5 to remove the stock paste/tape and apply it? I can't afford a 3rd party cooler sadly so this may be my only option. I cool it off using frozen butter packages sandwitched between 2 napkins on top and bottom and within minutes becomes the same temperatures.

Specific info on my GPU:

XFX 7600GT XXX edition PVT73AUDE3 AGP 8x

256MB VRAM and PCI-E variant specs unlike the crappier ones back in 2006.

Nvidia Windows 7 WHQL 186.18 Aero enabled and on balanced power plan

System specs are in sig as well.

Thanks

Artic Silver 5 did miracles for me on a Radeon X800GTO that was running way too hot and freezing all the time, I took off the heatsink and cleaned out the solution, applied some AS5 and just like magic there's no more freezing ever. Definitely do it.

BTW Bad news, my fan is dead afterall. I'll apply some tomorrow then thanks. I just wanted to be sure because I remember reading different paste is better for different parts.

Unfortunately It is still hot to the touch even after 2 reapplyings just to be sure it wasn't a fluke. Any ideas whether or not it is worth replacing the stock HSF with this?

If you're going to spend that much on a VGA cooler why not just get a new video card?

http://www.newegg.com/Product/Product.aspx...N82E16814102814

or this could be a cheaper alternative:

http://www.newegg.com/Product/Product.aspx...N82E16835186017

If I were you I'd just replace the video card altogether, something has to be wrong for it to running that hot. Maybe it's still covered by XFX's warranty?

Unfortunately It is still hot to the touch even after 2 reapplyings just to be sure it wasn't a fluke. Any ideas whether or not it is worth replacing the stock HSF with this?

That's a good HSF. Definitely better than stock and a lot better than that dead fan.

If you're going to spend that much on a VGA cooler why not just get a new video card?

http://www.newegg.com/Product/Product.aspx...N82E16814102814

or this could be a cheaper alternative:

http://www.newegg.com/Product/Product.aspx...N82E16835186017

If I were you I'd just replace the video card altogether, something has to be wrong for it to running that hot. Maybe it's still covered by XFX's warranty?

Probably out of warranty now but I'm with you on this one. Half the money spent on a VGA cooler could be applied to say a Radeon 4770 which will run cool and pretty quiet. I helped a friend install one today and it is doing marvels for his gaming now.

If you're going to spend that much on a VGA cooler why not just get a new video card?

http://www.newegg.com/Product/Product.aspx...N82E16814102814

or this could be a cheaper alternative:

http://www.newegg.com/Product/Product.aspx...N82E16835186017

If I were you I'd just replace the video card altogether, something has to be wrong for it to running that hot. Maybe it's still covered by XFX's warranty?

I would do the same but look at how slow the memory interface is for that much VRAM and the DDR2 makes it even worse. I got this one for the speed and at the time and still is today the best bang for your buck. I'd rather stay with this as well since my PSU is pretty much being fully or 90% used. Link to Specs I have an X-Fi XtremeMusic in there as well as a D-Link DGE-530T which has better driver support for Vista than the SiS 900 built in plus I now have Gigabit Full Duplex. My only workaround for now to the temporary passive cooling is to place my room fan next to the tower and I don't mind that but thanks for the suggestions. I doubt my card will be in warranty since I applied AS5 even though it is lifelong.

If you haven't changed the stock cooler then I don't know how XFX could know that you changed the thermal paste.

Just go through with the warranty and see what happens.. If not get a 3rd party heatsink.

Also you never mentioned the temperature of your video card exactly. Is it freezing or artifacting? Check the temperature because video cards normally run hot. My old 8600GT always used to burn me when I touched it but the temps stayed at around 60C and it never gave me any problems. Don't just base off the "overheating" problem by touching the video card.

I'm in Texas and it's been getting over 100 F here lately, and our AC is broke so I have to use a fan and it hardly cools my room but yet my PC temps are alright. :p I'm surprised I haven't passed out or gotten a heatstroke yet.

If you haven't changed the stock cooler then I don't know how XFX could know that you changed the thermal paste.

Just go through with the warranty and see what happens.. If not get a 3rd party heatsink.

Also you never mentioned the temperature of your video card exactly. Is it freezing or artifacting? Check the temperature because video cards normally run hot. My old 8600GT always used to burn me when I touched it but the temps stayed at around 60C and it never gave me any problems. Don't just base off the "overheating" problem by touching the video card.

I'm in Texas and it's been getting over 100 F here lately, and our AC is broke so I have to use a fan and it hardly cools my room but yet my PC temps are alright. :p I'm surprised I haven't passed out or gotten a heatstroke yet.

The SpeedFan temperatures reported as of this post is 70-73^C. No freezing or artifacting has occurred and I am honestly surprised it still works, Aero still works flawlessly. Like I said my room becomes a Sauna reaching temperatures of 110 on a 90 day, the building material is asbestos so it loves to absorb heat. By the time it is night, the room will barely cool down to 75 degrees.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hi all. I have a seven year old Acer laptop which according to Acer website can't receive the new MS updates. This device lives in my bedroom and is purely a consumption device. No gaming, no nothing. I have followed online instructions and turned off secure boot which now gives me a green tick in W11 Security. Now, I have MWB Premium now for several years and I'm reasonably careful with my online activity with this laptop. I'm also not a gamer in any way so I'm not asking much from this laptop. Given that, am I safe to continue using this device given I've turned off secure boot? That's it, that's my question.
    • finally [Taskbar] Taskbar customization just got easier. As we continue to make improvements to the Taskbar experience mentioned last month, we've introduced a dedicated Taskbar Size setting, making it simpler to find, understand, and personalize your ideal taskbar experience.
    • Let me get this straight... It was a web interface for Gmail, so if privacy at Google wasn't concerning enough you'd be going through two companies. And their big feature was the very thing that would make people consider dumping Gmail.
    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      213
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!