Need to find computer name from MAC address


Recommended Posts

Ok so here at the company i work for we have determined that someone has been doing things they should not with the computers and all i had was an ip address and a MAC address and i have tried ARP and NBTSTAT and i am unable to get the computer name from either of the numbers is there another way that i can find the computer name from either the IP address or MAC address.

Depending on your network setup you could also Browse the computer using a domain admin account etc.

Just go to any computer and type \\ipadd\c$ in the address bar of explorer.

This should let you browse the mydocuments folder which should give you enough information to figure out where they are.

http://www.coffer.com/mac_find/ may help you at least determine what kind of device it is.

You really have no WINS, DNS, or DHCP servers? most logs here are small and will often tell hostname requesting the info.

Do you have managed switches to set up port mirroring or if connected to a hub or at least if managed. Disconnect them or thier lan segment as last resort.

You can sniff the traffic.

If you can't get the Hostname using a NBTSTAT -a xxx.xxx.xxx.xxx (replaces x with ip) then the box is either firewalled. Does not respond to because it isnt a PC might be like a router, switch , printer etc.

try http or https to the hosts IP

attempt to telnet to it

try SSH to it.

lastly GO look for strange devices or PC

is your dhcp server a box (computer, windows, linux) or a router (cisco, netgear, etc.)?

If its a windows or linux box, you can look up the host name in the dhcp scope. If you have absolutely no idea what the box is, or who it is, then run nmap on it to see what ports the machine has open and what the make of the network card is. usually that might point you in the right direction.

if all else fails, kick them from the network or quarantine them, and first person who comes and bitches about it, is the culprit.

We know that it is a Dell computer, We know that it has to be wired in (our wireless network has a different IP set) and we know what the MAC address is. Also we know there is no current computer on the network that has the ip address that it had when it was causing problems. I think i might just have to go from computer to computer and check their mac addresses.

  littleneutrino said:
We know that it is a Dell computer, We know that it has to be wired in (our wireless network has a different IP set) and we know what the MAC address is. Also we know there is no current computer on the network that has the ip address that it had when it was causing problems. I think i might just have to go from computer to computer and check their mac addresses.

Block the MAC and see who complains they can't access the network.

"to go from computer to computer and check their mac addresses. "

Why is that? And why do you need the name? Are you switches not managed? On a managed switch you can always track down what port a mac address is connected too.. Even if the cheapest smart switches support this.

For example from $80 my home gig switch!

post-14624-1247153123_thumb.jpg

Ports with more than one mac address on them have downstream switches connected, etc.

finding what port a mac is connect to on cisco swith is as easy as

show mac-address-table | inc partofmacaddress

Once you no the port -- go to that port and follow the wire and you have your computer ;)

  fAlCoNNiAn said:
...

if all else fails, kick them from the network or quarantine them, and first person who comes and bitches about it, is the culprit.

  GreyWolfSC said:
Block the MAC and see who complains they can't access the network.

Great minds think alike.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It's been an age since I did desktop support, but here goes: You have an issue with Windows 11, which is fair.  You are using a freeware 3rd party app to make modifications to the default Windows 11.  Since an update, this 3rd party application no longer plays nice with Windows 11.  And this is somehow Windows 11's fault? Sorry, not buying that this is a Windows 11 problem... it's a customization issue that has just appeared, but standard 3rd party support.   Clearly you're upset.  You can't make Windows do anything, just like you can't make MacOS run Explorer or Linux run Nintendo games natively.  And I know people are going to say "sure, it's possible..." but those aren't defining elements of the OS.  You can't have animated backgrounds in Windows 11 natively -- so it's trash amirite??? I did quick searches about changing the default fonts and there are ways to do it, and clearly 3rd party freeware apps can do it (basically my guess is they're making registry changes on your behalf) and clearly they're having issue.   You can make your computer do a lot of things, but sometimes you get what you pay for. Did a quick search and don't see an easy option in Windows 10 either.  Some of these links - ironically - are for Windows 10.  They still apply. Here's a video tutorial of how it can be done without a 3rd party:   Same reference here with a bit more detail: https://www.howtogeek.com/716407/how-to-change-the-default-system-font-on-windows-10/ Once the font is chosen, the size can be changed via personalization from my understanding. Hope this helps.
    • Videomass 5.0.26 by Razvan Serea Videomass is not just a common converter, it features file concatenation, time trimmer, ability to create thumbnails, tiled mosaics and animated giffs from movies; it has sophisticated GUIs for video filters, previews for video stabilization, resizing, croping, transposing, color equalization. It features PEAK, RMS and EBU audio normalization with streams indexing capabilities, a volume analyzer, audio preview and many more interesting features… For the people that are familiar with FFmpeg, it has a highly customizable preset manager with the possibility to easily make your own presets through the GUI and adapt this to your specific needs or create new presets using the FFmpeg command line. For less experienced people there are also ready-to-use presets. It offers out-of-the-box all possible file formats like MP4, M4V, M4A, MKV, AVI, OGV, WEBM, MP3, AC-3, WAV, OPUS, FLAC, OGG and encoders like MPEG-4, H.264/AVC, H.265/HEVC, VP8, VP9, LIBAOM-AVI, VORBIS, PCM, LAME, ALAC, etc. Also you can copy audio or video streams (lossless mode) without re-encoding, or extract audio from videos and much more! Main features No ads Multi-Platform, work on Linux, MacOs, Windows, FreeBsd. Batch processing. Queue management (only available for Presets Manager and A/V Conversions). Advanced log file management. Multi-panels, switch between panels using keyboard shortcuts. Audio/video processing using advanced tools and sophisticated filters interfaces. While downloading audio or video you can now do other transcoding tasks. Multi languages support (English, French, Italian, Russian, Dutch, Portuguese-BR, simplified Chinese, Spanish-ES, Spanish-CU, Spanish-MX) Conversions and transcoding Drag and drop to add multiple files simultaneously. Fully customizable presets and profiles. Possibility to create your new presets and profiles from scratch. Has useful presets to start with. Using the Presets Manager, you can set any format and codec supported by your FFmpeg build. Media file info (from FFprobe) and streams analyzer (from volumedetect). Shows the estimated time of arrival during encodings. Concatenate, merge media files losslessly. Create Slideshows. Extract images from video. Ability to switch between different FFmpeg builds. Has useful graphical tools for evaluating the supported features of a specific FFmpeg build. Audio stream mapping using selectable indexes. You can set both audio and video to copy when you just want to convert formats (lossless process). Timeline editor to slice time segments or trim the duration of your media even without re-encoding and therefore without loss of quality. It has GUI video filters such as: Resize Crop Transpose Deinterlace Denoise Stabilize Equalize Audio filters for volume normalization such us: PEAK, RMS and EBU-R128 normalizers. PEAK and RMS volume analysis reporting. Ability to select specified audio streams in videos to apply volume normalization. and much more… Videomass 5.0.26 changelog: Fixed yt-dlp preferences tab issue #372 Enabled import of the external «yt_dlp» package also on the standalone executable built by Pyinstaller. Improved handling of the yt-dlp executable (yt-dlp.exe on Windows) which now provides some automation and useful information for the users. Added «Whale» browser to the supported browser list for cookie automations. Update it_IT i18n, thanks to @bovirus Update zh_CN i18n, thanks to @userwljs Removed API functionality for download operations. Now only the yt-dlp executable is used for download operations. The API is still needed and will only be used for statistics extraction and format code listing. Fixed #374 Added «FLAC resampler» new preset. Notes: FFmpeg is not included in this archive. Before launching the application, ensure you have a compatible version of FFmpeg for your system architecture (requires ffmpeg.exe, ffprobe.exe, and ffplay.exe, version 5.1 or newer). For more details and downloads, visit: Gyan's FFmpeg builds page BtbN's FFmpeg GitHub releases page Antivirus False Positive Detection Some antivirus programs may mistakenly flag Videomass.exe as malicious. These are false positives. To resolve this, submit the Videomass.exe file to your antivirus vendor for further analysis and request a false positive review. Download: Videomass 5.0.26 | 18.4 MB (Open Source) Links: Videomass Home Page | Screenshots | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Who could have thought that Microsoft's (not an ad business) browser is better at blocking ads than Google's (the ad business) browser.
    • So, Microsoft Edge should be behind Firefox and Chrome, because most average users have not heard about it and don't know it's exist.
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +FloatingFatMan
      259
    3. 3
      snowy owl
      244
    4. 4
      ATLien_0
      222
    5. 5
      +Edouard
      191
  • Tell a friend

    Love Neowin? Tell a friend!