Need to find computer name from MAC address


Recommended Posts

Ok so here at the company i work for we have determined that someone has been doing things they should not with the computers and all i had was an ip address and a MAC address and i have tried ARP and NBTSTAT and i am unable to get the computer name from either of the numbers is there another way that i can find the computer name from either the IP address or MAC address.

Depending on your network setup you could also Browse the computer using a domain admin account etc.

Just go to any computer and type \\ipadd\c$ in the address bar of explorer.

This should let you browse the mydocuments folder which should give you enough information to figure out where they are.

http://www.coffer.com/mac_find/ may help you at least determine what kind of device it is.

You really have no WINS, DNS, or DHCP servers? most logs here are small and will often tell hostname requesting the info.

Do you have managed switches to set up port mirroring or if connected to a hub or at least if managed. Disconnect them or thier lan segment as last resort.

You can sniff the traffic.

If you can't get the Hostname using a NBTSTAT -a xxx.xxx.xxx.xxx (replaces x with ip) then the box is either firewalled. Does not respond to because it isnt a PC might be like a router, switch , printer etc.

try http or https to the hosts IP

attempt to telnet to it

try SSH to it.

lastly GO look for strange devices or PC

is your dhcp server a box (computer, windows, linux) or a router (cisco, netgear, etc.)?

If its a windows or linux box, you can look up the host name in the dhcp scope. If you have absolutely no idea what the box is, or who it is, then run nmap on it to see what ports the machine has open and what the make of the network card is. usually that might point you in the right direction.

if all else fails, kick them from the network or quarantine them, and first person who comes and bitches about it, is the culprit.

We know that it is a Dell computer, We know that it has to be wired in (our wireless network has a different IP set) and we know what the MAC address is. Also we know there is no current computer on the network that has the ip address that it had when it was causing problems. I think i might just have to go from computer to computer and check their mac addresses.

  littleneutrino said:
We know that it is a Dell computer, We know that it has to be wired in (our wireless network has a different IP set) and we know what the MAC address is. Also we know there is no current computer on the network that has the ip address that it had when it was causing problems. I think i might just have to go from computer to computer and check their mac addresses.

Block the MAC and see who complains they can't access the network.

"to go from computer to computer and check their mac addresses. "

Why is that? And why do you need the name? Are you switches not managed? On a managed switch you can always track down what port a mac address is connected too.. Even if the cheapest smart switches support this.

For example from $80 my home gig switch!

post-14624-1247153123_thumb.jpg

Ports with more than one mac address on them have downstream switches connected, etc.

finding what port a mac is connect to on cisco swith is as easy as

show mac-address-table | inc partofmacaddress

Once you no the port -- go to that port and follow the wire and you have your computer ;)

  fAlCoNNiAn said:
...

if all else fails, kick them from the network or quarantine them, and first person who comes and bitches about it, is the culprit.

  GreyWolfSC said:
Block the MAC and see who complains they can't access the network.

Great minds think alike.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sayan Sen, do you think one day an image of the Windows Vista desktop or the wallpaper could be used in the primary image of an article? (When I think of CDs and DVDs I think of that release of Windows and of earlier releases; it is the one that debuted IMAPI 2.0 and other features.)
    • Big fan of EAC Here's a good non-default naming scheme I found on the web (can't take credit) File Name Scheme - %albumartist%\%year% - %albumtitle%\%tracknr2% %title% Various Artists Naming Scheme - Various Artists\%year% - %albumtitle%\%tracknr2% %title% Also, I need test but there is a new flac.exe binary & dll you can drop in the folder to upgrade flac support. I did this pre EAC 1.8. EAC 1.8 did upgrade it to 1.4.3. Flac 1.5.0 came out this year. https://ftp.osuosl.org/pub/xiph/releases/flac/ I don't know how much of a difference / impact will make.
    • Hello, Probably the simplest way of doing this would be to add a video card to your computer.   Regards, Aryeh Goretsky  
    • Check out Lisa Melton's GitHub transcoding scripts https://github.com/lisamelton/video_transcoding
    • ChatGPT's Advanced Voice Mode gets a significant update to make it sound more natural by Pradeep Viswanathan OpenAI introduced Advanced Voice Mode last year alongside the launch of GPT-4o. This feature uses natively multimodal models, such as GPT-4o, and can respond to audio inputs in as little as 232 milliseconds, with an average of 320 milliseconds, similar to human response time in a typical conversation. It can also generate audio that feels more natural, pick up on non-verbal cues, such as the speed you’re talking, and respond with emotion. Early this year, OpenAI released a minor update to Advanced Voice Mode that reduced interruptions and improved accents. Today, OpenAI has launched a significant upgrade to Advanced Voice Mode, making it sound even more natural and human-like. Responses now feature subtler intonation, realistic cadence—including pauses and emphasis—and more accurate expressiveness for certain emotions such as empathy and sarcasm. This update also introduces support for translation. ChatGPT users can now use Advanced Voice Mode to translate between languages. Simply ask ChatGPT to start translating, and it will continue translating throughout the conversation until instructed to stop. This feature effectively replaces the need for dedicated voice translation apps. For now, the updated Advanced Voice Mode is available only to ChatGPT paid users. OpenAI also noted that there are some known limitations with this latest update, outlined below. This update may occasionally result in minor reductions in audio quality, such as unexpected variations in tone and pitch—especially noticeable with certain voice options. OpenAI expects to improve audio consistency over time. Rare hallucinations in Voice Mode still persist, sometimes producing unintended sounds resembling ads, gibberish, or background music. While some minor limitations remain, the steady stream of improvements points to a future where the line between human and AI conversation becomes increasingly indistinguishable.
  • Recent Achievements

    • Week One Done
      maimutza earned a badge
      Week One Done
    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      +FloatingFatMan
      264
    3. 3
      snowy owl
      242
    4. 4
      ATLien_0
      223
    5. 5
      Edouard
      191
  • Tell a friend

    Love Neowin? Tell a friend!