Need to find computer name from MAC address


Recommended Posts

Ok so here at the company i work for we have determined that someone has been doing things they should not with the computers and all i had was an ip address and a MAC address and i have tried ARP and NBTSTAT and i am unable to get the computer name from either of the numbers is there another way that i can find the computer name from either the IP address or MAC address.

Depending on your network setup you could also Browse the computer using a domain admin account etc.

Just go to any computer and type \\ipadd\c$ in the address bar of explorer.

This should let you browse the mydocuments folder which should give you enough information to figure out where they are.

http://www.coffer.com/mac_find/ may help you at least determine what kind of device it is.

You really have no WINS, DNS, or DHCP servers? most logs here are small and will often tell hostname requesting the info.

Do you have managed switches to set up port mirroring or if connected to a hub or at least if managed. Disconnect them or thier lan segment as last resort.

You can sniff the traffic.

If you can't get the Hostname using a NBTSTAT -a xxx.xxx.xxx.xxx (replaces x with ip) then the box is either firewalled. Does not respond to because it isnt a PC might be like a router, switch , printer etc.

try http or https to the hosts IP

attempt to telnet to it

try SSH to it.

lastly GO look for strange devices or PC

is your dhcp server a box (computer, windows, linux) or a router (cisco, netgear, etc.)?

If its a windows or linux box, you can look up the host name in the dhcp scope. If you have absolutely no idea what the box is, or who it is, then run nmap on it to see what ports the machine has open and what the make of the network card is. usually that might point you in the right direction.

if all else fails, kick them from the network or quarantine them, and first person who comes and bitches about it, is the culprit.

We know that it is a Dell computer, We know that it has to be wired in (our wireless network has a different IP set) and we know what the MAC address is. Also we know there is no current computer on the network that has the ip address that it had when it was causing problems. I think i might just have to go from computer to computer and check their mac addresses.

  littleneutrino said:
We know that it is a Dell computer, We know that it has to be wired in (our wireless network has a different IP set) and we know what the MAC address is. Also we know there is no current computer on the network that has the ip address that it had when it was causing problems. I think i might just have to go from computer to computer and check their mac addresses.

Block the MAC and see who complains they can't access the network.

"to go from computer to computer and check their mac addresses. "

Why is that? And why do you need the name? Are you switches not managed? On a managed switch you can always track down what port a mac address is connected too.. Even if the cheapest smart switches support this.

For example from $80 my home gig switch!

post-14624-1247153123_thumb.jpg

Ports with more than one mac address on them have downstream switches connected, etc.

finding what port a mac is connect to on cisco swith is as easy as

show mac-address-table | inc partofmacaddress

Once you no the port -- go to that port and follow the wire and you have your computer ;)

  fAlCoNNiAn said:
...

if all else fails, kick them from the network or quarantine them, and first person who comes and bitches about it, is the culprit.

  GreyWolfSC said:
Block the MAC and see who complains they can't access the network.

Great minds think alike.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice! My $100 refurbished iPad 8 that I bought last year for a small project (and still runs like new cuz it's been mostly in storage the past several months) will get this v26 upgrade. I'm definitely gonna scope out OS26 on this device before upgrading my also-supported refurbished iPhone SE 3rd Gen (only got it for the 5G UW support).
    • Hello, The separate discussion about VLC has been moved to its own thread at  Regards, Aryeh Goretsky  
    • Hello, I am guessing this is the result of using a third-party tweaking tool instead of changing things within Windows settings. Windows 11 has a decent set of configuration options for the display, but they tend to be scattered throughout the operating system due to fragmentation of product ownership/inconsistent standards being applied by Microsoft. There are a few places in Windows 11 where you can modify the various display settings in order to get them to your liking: Under Settings → System → Display you can stroll down to the Scale & layout section and change the Scale and Display resolution settings to whatever you prefer.  For the Scale option, you can click on the text box to choose between the various pre-populated settings.  If none of those are exactly what you are looking for, click on the caret ("") caret to open the Custom scaling setting (also available under Settings → Display → Custom scaling).  I would recommend this as an option of last resort as this can cause display issues in various programs. I strongly recommend using the screen's native Display resolution here; it should show up as the "(Recommended)" resolution.  If it does not, you may need to install your monitor's profile information file (basically, a device driver for your monitor) to get the correct setting. Another place to look at making changes to fonts is under Accessiblity → Text size.  There is a slider bar for changing the text size from 100% to 225% there. You can try making changes to the ClearType settings.  It's a little bit finer-grained than the others, but it may make the text easier to view on the display.  Run the ClearType Text Tuner (filename: CTTUNE.EXE) and go through the wizard. You may want to do this several times under different lighting conditions or times of the day to figure out what works best for you overall. Lastly, you may want to look into using a dedicated assistive screen technology program from a third-party.  Microsoft provides a Screen Magnifier and a Narrator for text-to-speech, but they provide only basic functionality, and you may find that a third-party program works a lot better.  The pros of this is that third-party assistive technology programs tend to work quite well under Windows; Microsoft has historically worked closely with third-party developers of assistive technologies.  The cons of this are that such tools tend to be on the expensive side, since they are often sold to schools, businesses, or paid for by insurance companies, not individuals. Regards, Aryeh Goretsky  
    • Totally agree with you. I think people, especially on tech sites, need to realize that they’re the minority. Microsoft isn’t going to waste time on things that, in the big picture, don’t matter to the majority.
    • I think a lot of people here are too young to even remember Aqua.
  • Recent Achievements

    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      267
    3. 3
      +FloatingFatMan
      257
    4. 4
      Edouard
      203
    5. 5
      snowy owl
      178
  • Tell a friend

    Love Neowin? Tell a friend!