Battery capacity rapidly decreasing?


Recommended Posts

Are you keeping your Mac plugged in constantly? Have you used the Apple's calibration guide yet? ( http://support.apple.com/kb/HT1490 )

On that note, it could be worse - here's a copy paste from my 2007 MBP broken battery that Apple would not replace because it was bought during the summer and they said it did not match the list of broken batteries even thought it exhibited the *exact* symptoms;

  Charge Information:
  Charge remaining (mAh):	0
  Fully charged:	No
  Charging:	No
  Full charge capacity (mAh):	128
  Health Information:
  Cycle count:	61
  Condition:	Check Battery
  Battery Installed:	Yes
  Amperage (mA):	0
  Voltage (mV):	12303

The battery *died* after 60 cycles - beat that :-) And no, it's no longer in use :-)

150 mAh isn't that much. It could just be due to measurement error.

I will say that my late-2007 MBP battery didn't even get to 80 cycles before it lost most of its capacity. At the end I was barely getting an hour, and that was with everything turned off (WiFi, Bluetooth, etc.) and the brightness all the way down. I wouldn't be surprised if the newer batteries aren't much better.

It depends if those were complete cycles (totally dead to full charge) or just top-up cycles (75%-90% charge to full charge).

Try a couple of complete cycles (let the battery run dead, and then re-charge to full overnight), see if you can 'reset' the battery.

For camparison, after 16 months mine has gone from an original of 5020 mAh to 4740 mAh and is at 94% health. It's had 120 cycles.

Edit: Just found this article:

http://support.apple.com/kb/HT1490

You can calibrate your iBook, PowerBook, MacBook, MacBook Air, or MacBook Pro computer's lithium ion battery for best performance.

The battery has an internal microprocessor that provides an estimate of the amount of energy in the battery as it charges and discharges. The battery needs to be recalibrated from time to time to keep the onscreen battery time and percent display accurate and to keep the battery operating at maximum efficiency. You should perform this procedure when you first use your computer and then every few months after that. If you normally leave your Apple portable computer connected to AC power and very rarely use it on battery power you may want to perform this process once a month. The website www.apple.com/batteries has more helpful information regarding batteries and offers an iCal calendar to remind you to calibrate your battery.

Edited by Laura

for batteries of any kind (laptop, phone, camera etc) Ive always followed the rule of allowing it to discharge completely before charging

Battery is still at about 103% after 792 cycles :)

Macbook White Core Duo 1.83GHZ, brought Oct 2006

Used everyday since, 2GB RAM 320GB HDD

picturefjb.jpg

for batteries of any kind (laptop, phone, camera etc) Ive always followed the rule of allowing it to discharge completely before charging

Battery is still at about 103% after 792 cycles :)

Macbook White Core Duo 1.83GHZ, brought Oct 2006

Used everyday since, 2GB RAM 320GB HDD

This is generally good policy; however, with modern Lithium Ion batteries, this is less important. As far as I understand, full charge and discharge cycles are much more important on Nickel Metal Hydride batteries as they can develop a "memory." Lithium Ion batteries, through calibration, can maintain great condition (through a finite cycle count) with partial charge and discharge cycles.

I'm not sure if this link was posted here yet, but Apple's battery page has some good information on this topic.

for batteries of any kind (laptop, phone, camera etc) Ive always followed the rule of allowing it to discharge completely before charging

Battery is still at about 103% after 792 cycles :)

Macbook White Core Duo 1.83GHZ, brought Oct 2006

Used everyday since, 2GB RAM 320GB HDD

picturefjb.jpg

That's almost hard to believe... just too good to be true. I'm not insinuating that you're a liar, it's just... well... I wish my iBook's battery was that good still.

I'm testing out a little theory on the old battery that I have, I chatted with someone who had issues _after_ 10.5.7 was released, apparently the AppleSmartBattery extension has some issues that a lot of people are seeing (as in reduced power, not charging etc).

It's a bit dangerous and tricky so I'll let you know how it goes. :>

i know what you mean, modern batteries shouldn't require these steps, however i believe they do help.

I also know what you mean being hard to believe, it's the reason i stuck a screen shot up there. I might have been incredibly lucky with this battery, however ive managed to get three years out of a compaq pc laptop battery.

i know what you mean, modern batteries shouldn't require these steps, however i believe they do help.

I also know what you mean being hard to believe, it's the reason i stuck a screen shot up there. I might have been incredibly lucky with this battery, however ive managed to get three years out of a compaq pc laptop battery.

Oh no, I wasn't saying they're not required; I was just contrasting the importance of "calibrating" the battery when using a lithium-ion battery as opposed to a nickel metal or nickel cadmium. I can attest to the fact that calibrating a lithium-ion is important if you don't usually fully discharge and recharge your battery. I had a MBP battery die out after about 100 cycles, mainly because I didn't take good care of it. I know better now :)

For camparison, after 16 months mine has gone from an original of 5020 mAh to 4740 mAh and is at 94% health. It's had 120 cycles.

Edit: Just found this article:

http://support.apple.com/kb/HT1490

After following Apple's instructions for calibrating, my battery is now at 96%, or 4849 mAh.

for batteries of any kind (laptop, phone, camera etc) Ive always followed the rule of allowing it to discharge completely before charging

Battery is still at about 103% after 792 cycles :)

...

Your battery capacity went up after you bought it? I guess you got lucky and your battery had more than the standard arbitrary 5020 mAh to start with :p

yep, as hard as it is to believe, my battery actually got better over time. I think the figure used to be higher, im sure i posted it on neowin earlier in the year.

I just get the feeling that one day ill switch on the mac and the battery will just rapidly hit 0% health :)

Interestingly enough, I was able to zap my broken battery back to life with some.. unorthodox methodology, the battery meter now shows 720mAh maximum capacity, yesterday it was 170, 280 and 490 respectively - it seems to be going up every time I completely discharge and re-charge it.

This was the battery with the 61 load cycles and 0% by the way.

I wonder how high it'll go :p

After following Apple's instructions for calibrating, my battery is now at 96%, or 4849 mAh.

Your battery capacity went up after you bought it? I guess you got lucky and your battery had more than the standard arbitrary 5020 mAh to start with :p

Mine has too (ignore the 6 months, it's a new refurb):

Picture%201.png

It's on 97% as I've been using it, it charges to the full 4900.

Well, magic does happen - now a few days of emptying, resting, charging the battery the results are so far;

  Charge Information:
  Charge remaining (mAh):	2051
  Fully charged:	No
  Charging:	No
  Full charge capacity (mAh):	2051
  Health Information:
  Cycle count:	61
  Condition:	Good

For some reason it says not fully charged and the cycle count doesn't go up even if I completely discharge it. Note, this battery was originally 61 mAh max capacity until I zapped it and it keeps going up 50-200mAh on every discharge-charge.

Get a battery that will last you 3+ years, like my battery (sig)

Joking, anyway. If it's wearing out, get apple too look at it (need to go to sleep so haven't read the thread but w/e)

EDIT EDIT: Look's like you solved it. Ignore this post plz :)

Edited by Kirbeh
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      74
  • Tell a friend

    Love Neowin? Tell a friend!