Recommended Posts

r0bc: you're using my previous tab progress line userstyle, upgrade.

Is this meant to only work on inactive tabs? How would I alter this to also show on the current tab?

The current tab's progress is shown on the URLbar (requires Fission I think) and thus it's redundant to put it on the tab, the mockups show that the active tab doesn't have the bar

r0bc: you're using my previous tab progress line userstyle, upgrade.

The current tab's progress is shown on the URLbar (requires Fission I think) and thus it's redundant to put it on the tab, the mockups show that the active tab doesn't have the bar

KriLL3, I took the screenshot AFTER upgrading... why do you say so?

The current tab has the progressbar under the urlbar as in one of the previous mockups, while all the other tabs have it on the top of the tab itself. To have both I used a tweaked style originating from somebody who posted the code on SpewBoy's DeviantArt page in addition to KriLL3's style.

The current tab's progress is shown on the URLbar (requires Fission I think) and thus it's redundant to put it on the tab, the mockups show that the active tab doesn't have the bar

The one updated Firefox 4.0 preview image that I saw had no indication to which version of loading bar the current tab used. [The active tab has a Google search for "example" already loaded.]

But why I asked is because I don't have Fission installed anymore so I will dig into your userstyle and figure it out. I notice the loading bar also disappears on mouseover, part of the userstyle, too, I'd imagine?

But why I asked is because I don't have Fission installed anymore so I will dig into your userstyle and figure it out.

Remove:

.tabbrowser-tabs .tabbrowser-tab[selected="true"] .tab-progress, .tabbrowser-tabs .tabbrowser-tab[showbutton="on"] .tab-progress
{
display: none !important;
}

I notice the loading bar also disappears on mouseover, part of the userstyle, too, I'd imagine?

Fixed that, I use that personally since I have TMP set to switch tabs on mouse-over, and it was glitchy until I hid them on hover, removed it from the userstyle since that's not a common usage scenario, the inclusion was an error on my part.

Compare your screenshot with the preview I showed, you're not using the new one, the new one replaces the old one, uninstall the old one.

Of course you were right, Stylish said it had upgraded the style but it hadn't ;) I must say I liked more the previous, with the "big glow"... in the mockup it seems to me that there's anyway "more glow" than your current rendition, though clearly much less than in the previous... probably an "in-between" version would do.

My home button addon acts just like the home toolbar button. You can single click to open in the current tab or middle click to open in a new tab. The page and tools are just extra toolbar buttons. They do not interfere with Personal Menu at all. I created it so I could have almost 1:1 look with the original mockups.

I wouldn't try to hide Bookmarks Toolbar from my tools menu, for some reason it seems to cause some problems with glasser enabled. Well download it and tell me if it works well for you. Its very much a work in progress though.

If you have tabs on top you need this extra code:

.home-tab-button {
margin-bottom: -4px !important;}

Addons.zip

I've installed both but it didn't work, nothing different from the original !

I've made a tab progress line userstyle for the Strata40 0.4.3 theme in line with the most recent 3.7 mockup (which will most likely carry over in 4.0, but they're currently focusing on 3.7 since it's in the middle of "crunch time" while 4.0 is very "pie in the sky"):

21240_before.png ---> 21240_after.png

Go get it: http://userstyles.org/styles/21240 :)

Is there any possibility to get this feature without the tab mix plus addon?
I've installed both but it didn't work, nothing different from the original !

The page add-on should add two additional toolbar icons, you can add them under customize toolbar. You're not by chance using "Undo Closed Tabs Button" are you?

The page add-on should add two additional toolbar icons, you can add them under customize toolbar. You're not by chance using "Undo Closed Tabs Button" are you?

I have Tab Mix Plus installed, when i tried to disable it, the home button was on top just like your screenshot.

But when i enable Tab Mix Plus, the home button restored to it's original, so is there anyway to make the addon home on top work with tab mix plus ? :D

Is there any possibility to get this feature without the tab mix plus addon?

There should be other addons that do part of what TMP does and perhaps one that just adds progress bars on tabs but I don't know them, if you find one point it out to me and I can adapt the userstyle to make use of it.

There should be other addons that do part of what TMP does and perhaps one that just adds progress bars on tabs but I don't know them, if you find one point it out to me and I can adapt the userstyle to make use of it.
I searched and I think this is an addon which can do this: https://addons.mozilla.org/de/firefox/addon/4930

It would be great if you can disable the other features of this addon with css if possible and can create an userstyle for this :)

Anyone know the fix to this?

667ef_Untitled-3.png

To fix the Personal Menu text bug (unrelated to my theme) do one of the following:

* In Personal Menu's advanced options tab make sure "Show temporarily by pressing ALT key" is unchecked.

* Download and use Firefox 3.6 or 3.7 and uncheck "Hide menu bar" in Personal Menu's options tab. Right click on the menu bar to hide it and press ALT to show it by default.

Been using this for the last 24 hours, and I think it's a keeper! Anyone know how to keep the Home Tab showing while using TMP for the individual tab loading bars?

previewsm.jpg

Download Now!

After a long period of hard work, we've brought to you StrataBuddy!

This addon includes three custom toolbar buttons, Tools, Page, and Bookmarks. It also allows you to customize Strata40 to make it resemble the 3.7 Mockups.

To access the customization options, go to the addons window and go to the addon's options. From there, you can choose what optional components you would like to use.

Features:

Accurate Firefox 3.7 Graphics, most of them Remade

Customization Features, including Alternative Back/Forward Buttons

New 3.7 Styled Reload/Stop Buttons

Animated Effects for Many Buttons

Page, Tools, and Bookmark Buttons

Aero Glass Effects

Tab Progress Line

Tabs on Top

Tab/Bookmark Background

and many more...

Note: This theme has graphics resembling SpewBoy's images, but most of SpewBoy's images have been recreated completely from scratch including Back/Forward (except for the arrows, which were borrowed from SpewBoy's Back/Forward), URLBar, IDBox, SearchBar, and Stop and Reload, which were created in his style toolbar buttons.

Credits:

SoapyHamHocks- Code

BoneyardBrew - Graphics

dert07 - Code

Krill3 - Tab progress line graphics

codefisher - restartMozilla/OpenProfileDir code

foxdie - applyCSS code

Yeah..nothing changes when i use stratabuddy

What happens exactly? You install it and nothing happens at all? First, make sure you restart Firefox after you install it. Then, double-check it is installed and running in your addons window. Then, right-click on the addon and go to options. Check in a few options, then restart Firefox.

If nothing happens after that, let me know.

What happens exactly? You install it and nothing happens at all? First, make sure you restart Firefox after you install it. Then, double-check it is installed and running in your addons window. Then, right-click on the addon and go to options. Check in a few options, then restart Firefox.

If nothing happens after that, let me know.

Yeah i installed it, went to addons and checked a bunch of different stuff and it everything still looks the same (strata40)

Yeah i installed it, went to addons and checked a bunch of different stuff and it everything still looks the same (strata40)

Did you restart FF after you checked in some options?

Is Page, Tools, etc. missing? Try right clicking an area under the urlbar and clicking customize. Then, drag on the new Page, Tools, Reload, and Stop buttons onto your toolbar.

Did you restart FF after you checked in some options?

Is Page, Tools, etc. missing? Try right clicking an area under the urlbar and clicking customize. Then, drag on the new Page, Tools, Reload, and Stop buttons onto your toolbar.

Ah ok, i didn't know i had to add some new stuff from the customize window :s Thanks for the help! But one more question, how do i get the home button in the position you have it in the screenshot?

Ah ok, i didn't know i had to add some new stuff from the customize window :s Thanks for the help! But one more question, how do i get the home button in the position you have it in the screenshot?

Glad I could help :).

I had to upload Home separately from StrataBuddy, so it wasn't ready at the same time. I am going to update the theme's description with a link to the home addon in a few minutes.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • EU Commission explains why Siri AI isn't launching in the EU, and Apple is to blame by Hamid Ganji Image via Apple This week at Apple’s 2026 developers conference, the iPhone maker unveiled the upgraded Siri after more than a year of delays. The new Siri is now called Siri AI, and it's powered by Google Gemini models. While Siri AI is preparing to roll out to Apple users worldwide, the company’s EU customers might need to wait much longer before getting their hands on the new assistant. Shortly after announcing iOS 27, Apple said in a blog post that Siri AI is not coming to the EU anytime soon due to hurdles posed by the Digital Markets Act (DMA) and other regulatory requirements. To comply with the DMA in the EU, Apple apparently needs to open Siri AI to rival assistants on iOS 27 and iPadOS 27. Apple has refused to do so, which has resulted in Siri AI being delayed for its EU users. The company argues that such a move would put users’ privacy at risk. In a statement to Neowin, a European Commission spokesperson provided more details about why Siri AI will not be rolled out to Apple customers in the region. The statement first noted that the DMA does not prohibit Apple from launching its services in the EU and that the company is simply required to comply with the law. The European Commission spokesperson added that, since Apple is considered a gatekeeper under the DMA, it is “obliged to give third parties access to equivalent features as they give to its own products. Because the DMA is precisely about giving users the choice to use the product they find best suits their needs.” Moreover, the spokesperson said the Commission has been in contact with Apple, though the company “did not develop proposals for DMA compliant interoperability solutions.” The statement also clarified that companies designated as gatekeepers cannot leverage their status and products, such as operating systems, to favor their own AI services. The first public beta of iOS 27 will roll out next month, while the stable version is expected to launch this fall following the release of the iPhone 18 series. It remains unclear when Apple will be able to resolve its DMA-related compliance issues with the European Commission and bring Siri AI to its European customers.
    • i wish i could uninstall Chrome from Anrdoid...  
    • XMedia Recode 3.6.3.1 by Razvan Serea XMedia Recode is a free video and audio converter. XMedia Recode supports nearly all audio and video codecs. With XMedia Recode you can easily convert nearly all film and music files in the format you want. Convert for countless devices, select the predefined profile (iPhone, iPad, iPod Touch, Android-Tablets, Sony PSP, Amazon Kindle, Smartphones Blackberry, Wii und DS, Cowon, Android, HTC, Xbox360, Samsung, LG). XMedia Recode converts: 3GP in AVI, 3GP in FLV, AC3 in MP3, AC3 in WAV, ASF in 3GP, ASF in FLV, ASF in MP4, AVI in FLV, AVI in 3GP, FLAC in MP3, FLAC in WMA, FLV in 3GP, FLV in Mp3, DVD in 3GP, DVD in AC3, DVD in AVI, DVD in MP3, DVD in MP4, DVD in MOV, DVD in SVCD, DVD in VCD, DVD in WMV, OGG in MP3, OGG in WMA, MPEG in AVI, MP2 in MP3, MP4 in FLV, MP4 in AVI, M4P in MP3, MOV in 3GP, MOV in AVI, MOV in FLV, WMA in MP3, WMV in FLV, WAV in MP3. Main functions of XMedia Recode: Extracts audio tracks from DVD, Blu-ray and video files Framework also freely selectable color (Padding) Drag-n-drop of video files directly on the encoder Selection display format (1: 1, 3:2, 4:3, 5:4, 5:6, 11:9,16: 9, 16:10, 2.21: 1) Zoom shot (none, type character box, media, Pan Scan, to screen) ''Direct Stream'' copies the audio stream or video stream into the target format 2-Pass-Encoding Volume correction Can change framerate, bit rate, resolution Can extract audio stream of most video formats Produce DVD copies for mobile phones, various mobile devices Edit Video: Color correction Video cut Cropping Denoise Delogo Deblocking De-interlacing Flip Image Start Time End Time Resolution Rotate Image Sepia Sharpness Padding Video fade in / fade out XMedia Recode 3.6.3.1 changelog: Update of ffmpeg Updated AOM AV1 Codec (3.14.1) Fixed minor bugs Download: XMedia Recode 64-bit | Portable ~20.0 MB (Freeware) Download: XMedia Recode 32-bit | Portable View: XMedia Recode Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This has been on the roadmap for years, nothing really new here. This is one of the few areas where Microsoft is making Windows better. Universal print is a very good things and so far works as expected. The last step is ending the option for 3rd parties to add traditional custom drivers. It is somewhat of a hurdle, but it is for a long-term good. The downside is that printer manufactures are likely going to use this as an excuse to force users onto new printers. Considering this roadmap has been public for years, then printers sold during that time should be covered...but I'm sure they will have a different opinion.
    • Where are you seeing that? It seems hard to believe considering nothing in the Apple ecosystem gets that level of access, and the same for Android unless you put some kind of custom rooted image on the phone. It just seems like asking for something that hasn't ever been given to anyone, is a stupid strategy; it's going to be an automatic 'no'.
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      PsYcHoKiLLa
      213
    3. 3
      +Edouard
      145
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      83
  • Tell a friend

    Love Neowin? Tell a friend!