Razer Lycosa Mirror Edition


Recommended Posts

Does anyone else have this keyboard, and major problems with it ?

i bought one a good few months back, and for the first month or so it was fine.

then keys stopped working, randomly.

id be playing a game or just typing and suddenly the D key would just go.

i then realised to fix this i needed to unplug it and plug it back in, then depending on the game restart it.

then i started having a problem where the keyboard wont turn on.

it happens at POST, which is really annoying if i need to load windows as i have grub and often find it boots into linux cause my keyboard cant do anything.

i have to hit the keyboard from the back a few times before itll start working.

and if i have the media keys set to a player i have installed, the keyboard has a habbit of randomly opening the player, and just skipping through my library.

so i went over to the razer site after realising the NORMAL lycosa's had all these problems and that you just had to send them your serial number, and if you fell in the range of serial's with the known problems, you got a replacement.

on the page i read about this, there were commnents from other mirror users with my exact problem, and someone from razer saying the mirror lycosa cant have the problem because it was produced after the problem was fixed.

evidently not the case.

i sent an email to razer, including my serial number, the fact it's a mirror, and the fact it's having all these problems.

this was about 3 or 4 months ago.

im yet to recieve anything back.

out of inpatience, i read up a fix for it (taking it apart and removing a screw that's in the way and causes the touchscreen to go mad), but it didnt change a thing.

infact ive done it twice, because i thought i mustve done something wrong the first time, but it still didnt work.

so now im stuck in a position where i cant send it back, and ive wasted ?70

as far as im concerned, no one should ever buy this keyboard.

it seems like a hit or miss as to whether yours is actually going to work properly!

:crazy::

/rant

Link to comment
https://www.neowin.net/forum/topic/815014-razer-lycosa-mirror-edition/
Share on other sites

I've had issues with Razers equipment not working at boot-up. I believe it has something to do with the very high power requirements that their stuff requests. They attempt to max the USB specification with almost everything they sell and at post when you have a few USB devices sharing the same host controller there are times where the amount of power being requested just isn't enough which causes their devices to not work at boot-up unless you unplug and plug them back in or deactivate and then reactivate them from device manager.

I've witnessed this the most with their 5.1 Surround Sound headsets and their Mice but I've heard of it happening with others on their Keyboards as-well and only at Post. I've personally had this happen on no less than 4 different Motherboards and 2 separate Laptops so I know this is an issue with Razers stuff.

Something to note. I get my Razer 5.1 Surround Sound headset to come on every single time at post if I leave its Blue LED lighting off.

I have the same keyboard they've had problems from the start, the first batch of lycosas they released had a lot of problems but they were supposed to have been fixed so I went and bought one and the touchpad doesn't even work, the problem is it's not worth the money sending it back just to get the touchpad fixed, luckily razers drivers are quite good so I bound all the media keys to the keypad.

When I reported the problems I got a response back the next day, Razers always been pretty fast to respond, still it's the last time I buy any thing from Razer, shame I liked their mice.

Definitely WOULDN'T recommend buying one

Theirs nothing special about the keyboard to make it worth the price it's nothing more than a cheap keyboard with a backlight and a media touchpad nothing that makes it worth the price it doesn't even have anti ghosting for all the keys, I'm not even sure how you clean the keyboard I don't think you can even remove the keys. :no:

hmm Vice, after you said about them trying to max out the power specifications for USB, i unplugged my 360 controller and webcam at boot.

it still didnt turn on, but it came on quicker than it usually does.

i had to hit the back of it, the past week or so its taken a good 5 minutes of me booting and hitting the back of it before it actually comes on.

it worked first hit this time though ;)

it just annoys me how it was perfectly fine for the 30 days i had to send it back, and then straight after starting going haywire.

i might take it apart and just unplug the touch screen, i never use it and it seems to be the source of most of the problems i think.

so jealous of my friend right now who came to my house on friday and spent a grand and a half on a pretty nice computer.

he got a G19 :(

Well, i bought one (Lycosa Mirror) a week ago or so, but had to return it because it was defect.

It had all the problems the early batch had (led flashing, random keys stop working, touch pad don't work).

My keyboard was a 'new batch' KB (serial started with MT09), and it's a shame that Razer still have some bad Lycosa keyboards in production.

I've send it back now, and will hopefully get a refund.

After a detailed explanation to the online-shop i bought it from, they refunded the money 2 days later.

I like Razer's mice, but i will never touch their keyboards again.

Now i have an apple wired instead (i wanted a keyboard without all the extra mediakeys and all that bs)

The G19 is crazy, a keyboard that uses a power adapter is going too far.

holy ****, i didnt know it needed it's own plug :| lmao

i thought itd just be normal USB.

come to think of it, it has a screen.

i feel quite silly now for not realising USB cant power a screen.

After a detailed explanation to the online-shop i bought it from, they refunded the money 2 days later.

I like Razer's mice, but i will never touch their keyboards again.

Now i have an apple wired instead (i wanted a keyboard without all the extra mediakeys and all that bs)

same, i do quite like their mice, but i also will never be going near a razer keyboard again.

and ill try to make sure my friends dont ethier.

saitek's keyboards are pretty reliable though.

i had one for YEARS, and gave it away when i got this razer and its still going on my friend's computer.

another freind bouht a saitek one aswell and it seems alot tougher and more sturdy.

my I and G keys just died, had to unplug it and plug it back in and beat it before theyd work again :crazy:

I have the same keyboard they've had problems from the start, the first batch of lycosas they released had a lot of problems but they were supposed to have been fixed so I went and bought one and the touchpad doesn't even work, the problem is it's not worth the money sending it back just to get the touchpad fixed, luckily razers drivers are quite good so I bound all the media keys to the keypad.

When I reported the problems I got a response back the next day, Razers always been pretty fast to respond, still it's the last time I buy any thing from Razer, shame I liked their mice.

Definitely WOULDN'T recommend buying one

Hmm....I bought my Mirror Edition when it first came out and I've never had any problems with it. Typing on it right now...

  • 4 months later...

While it's a somewhat old thread, I feel people should know that the problems STILL persist. A few days ago I bought the MT09 series of the non-mirror and within 12 hours had issues of keys not responding and requiring a reboot or replug to work. I've already contacted Razer about the issue and after pointing out how their canned responses are of no help, they finally agreed that RMA is the best option.

  • 1 year later...

While it's a somewhat old thread, I feel people should know that the problems STILL persist. A few days ago I bought the MT09 series of the non-mirror and within 12 hours had issues of keys not responding and requiring a reboot or replug to work. I've already contacted Razer about the issue and after pointing out how their canned responses are of no help, they finally agreed that RMA is the best option.

I had the same issues. However I made sure all new drivers were installed (v3 I think it is now). Just make sure you leave the task bar icon running (don't disable it), also there's an option that disables hotswitching.

No problems for 3 weeks now.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      73
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!