Razer Lycosa Mirror Edition


Recommended Posts

Does anyone else have this keyboard, and major problems with it ?

i bought one a good few months back, and for the first month or so it was fine.

then keys stopped working, randomly.

id be playing a game or just typing and suddenly the D key would just go.

i then realised to fix this i needed to unplug it and plug it back in, then depending on the game restart it.

then i started having a problem where the keyboard wont turn on.

it happens at POST, which is really annoying if i need to load windows as i have grub and often find it boots into linux cause my keyboard cant do anything.

i have to hit the keyboard from the back a few times before itll start working.

and if i have the media keys set to a player i have installed, the keyboard has a habbit of randomly opening the player, and just skipping through my library.

so i went over to the razer site after realising the NORMAL lycosa's had all these problems and that you just had to send them your serial number, and if you fell in the range of serial's with the known problems, you got a replacement.

on the page i read about this, there were commnents from other mirror users with my exact problem, and someone from razer saying the mirror lycosa cant have the problem because it was produced after the problem was fixed.

evidently not the case.

i sent an email to razer, including my serial number, the fact it's a mirror, and the fact it's having all these problems.

this was about 3 or 4 months ago.

im yet to recieve anything back.

out of inpatience, i read up a fix for it (taking it apart and removing a screw that's in the way and causes the touchscreen to go mad), but it didnt change a thing.

infact ive done it twice, because i thought i mustve done something wrong the first time, but it still didnt work.

so now im stuck in a position where i cant send it back, and ive wasted ?70

as far as im concerned, no one should ever buy this keyboard.

it seems like a hit or miss as to whether yours is actually going to work properly!

:crazy::

/rant

Link to comment
https://www.neowin.net/forum/topic/815014-razer-lycosa-mirror-edition/
Share on other sites

I've had issues with Razers equipment not working at boot-up. I believe it has something to do with the very high power requirements that their stuff requests. They attempt to max the USB specification with almost everything they sell and at post when you have a few USB devices sharing the same host controller there are times where the amount of power being requested just isn't enough which causes their devices to not work at boot-up unless you unplug and plug them back in or deactivate and then reactivate them from device manager.

I've witnessed this the most with their 5.1 Surround Sound headsets and their Mice but I've heard of it happening with others on their Keyboards as-well and only at Post. I've personally had this happen on no less than 4 different Motherboards and 2 separate Laptops so I know this is an issue with Razers stuff.

Something to note. I get my Razer 5.1 Surround Sound headset to come on every single time at post if I leave its Blue LED lighting off.

I have the same keyboard they've had problems from the start, the first batch of lycosas they released had a lot of problems but they were supposed to have been fixed so I went and bought one and the touchpad doesn't even work, the problem is it's not worth the money sending it back just to get the touchpad fixed, luckily razers drivers are quite good so I bound all the media keys to the keypad.

When I reported the problems I got a response back the next day, Razers always been pretty fast to respond, still it's the last time I buy any thing from Razer, shame I liked their mice.

Definitely WOULDN'T recommend buying one

Theirs nothing special about the keyboard to make it worth the price it's nothing more than a cheap keyboard with a backlight and a media touchpad nothing that makes it worth the price it doesn't even have anti ghosting for all the keys, I'm not even sure how you clean the keyboard I don't think you can even remove the keys. :no:

hmm Vice, after you said about them trying to max out the power specifications for USB, i unplugged my 360 controller and webcam at boot.

it still didnt turn on, but it came on quicker than it usually does.

i had to hit the back of it, the past week or so its taken a good 5 minutes of me booting and hitting the back of it before it actually comes on.

it worked first hit this time though ;)

it just annoys me how it was perfectly fine for the 30 days i had to send it back, and then straight after starting going haywire.

i might take it apart and just unplug the touch screen, i never use it and it seems to be the source of most of the problems i think.

so jealous of my friend right now who came to my house on friday and spent a grand and a half on a pretty nice computer.

he got a G19 :(

Well, i bought one (Lycosa Mirror) a week ago or so, but had to return it because it was defect.

It had all the problems the early batch had (led flashing, random keys stop working, touch pad don't work).

My keyboard was a 'new batch' KB (serial started with MT09), and it's a shame that Razer still have some bad Lycosa keyboards in production.

I've send it back now, and will hopefully get a refund.

After a detailed explanation to the online-shop i bought it from, they refunded the money 2 days later.

I like Razer's mice, but i will never touch their keyboards again.

Now i have an apple wired instead (i wanted a keyboard without all the extra mediakeys and all that bs)

The G19 is crazy, a keyboard that uses a power adapter is going too far.

holy ****, i didnt know it needed it's own plug :| lmao

i thought itd just be normal USB.

come to think of it, it has a screen.

i feel quite silly now for not realising USB cant power a screen.

After a detailed explanation to the online-shop i bought it from, they refunded the money 2 days later.

I like Razer's mice, but i will never touch their keyboards again.

Now i have an apple wired instead (i wanted a keyboard without all the extra mediakeys and all that bs)

same, i do quite like their mice, but i also will never be going near a razer keyboard again.

and ill try to make sure my friends dont ethier.

saitek's keyboards are pretty reliable though.

i had one for YEARS, and gave it away when i got this razer and its still going on my friend's computer.

another freind bouht a saitek one aswell and it seems alot tougher and more sturdy.

my I and G keys just died, had to unplug it and plug it back in and beat it before theyd work again :crazy:

I have the same keyboard they've had problems from the start, the first batch of lycosas they released had a lot of problems but they were supposed to have been fixed so I went and bought one and the touchpad doesn't even work, the problem is it's not worth the money sending it back just to get the touchpad fixed, luckily razers drivers are quite good so I bound all the media keys to the keypad.

When I reported the problems I got a response back the next day, Razers always been pretty fast to respond, still it's the last time I buy any thing from Razer, shame I liked their mice.

Definitely WOULDN'T recommend buying one

Hmm....I bought my Mirror Edition when it first came out and I've never had any problems with it. Typing on it right now...

  • 4 months later...

While it's a somewhat old thread, I feel people should know that the problems STILL persist. A few days ago I bought the MT09 series of the non-mirror and within 12 hours had issues of keys not responding and requiring a reboot or replug to work. I've already contacted Razer about the issue and after pointing out how their canned responses are of no help, they finally agreed that RMA is the best option.

  • 1 year later...

While it's a somewhat old thread, I feel people should know that the problems STILL persist. A few days ago I bought the MT09 series of the non-mirror and within 12 hours had issues of keys not responding and requiring a reboot or replug to work. I've already contacted Razer about the issue and after pointing out how their canned responses are of no help, they finally agreed that RMA is the best option.

I had the same issues. However I made sure all new drivers were installed (v3 I think it is now). Just make sure you leave the task bar icon running (don't disable it), also there's an option that disables hotswitching.

No problems for 3 weeks now.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      578
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!