USB driver - The required line was not found in the INF


Recommended Posts

There's an audio recording device I use, called Cenix Digital Voice Recorder. The installation CD has the setup, which installs Power Voice II onto the computer; there's also a folder called "Driver" which contains two files: CenixFMC.inf (3KB) and CenixFMC.sys (19KB).

I have used this device earlier and it has worked. At present, when I try to install it, the Power Voice software easily installs, then when I connect the audio recorder by way of USB, XP gives the messages of found new hardware and the driver installation starts, but then the computer stops responding at the point where it shows files being copied between two folders. I've tried allowing it to automatically install the driver, I've tried pointing out the folder manually from the hard disk where I have copied it and the CD, and I've tried allowing it to connect to the net to find a driver, but nothing works. Each time, the computer stops responding and I have press the reset button.

When I tried to install it in Vista, the computer did not stop responding, but it gave a message that the required software could not be installed, and the reason it gave was "The required line was not found in the INF".

I've tried searching the net for drivers, but what I did found was the same stuff that I've got. I ran a CRC check for the drivers I have on my hard disk with the ones I downloaded, and they are the same.

There's another such post at a Vista64 forum, but there is no answer there:

http://www.vistax64.com/drivers/155642-hel...where-turn.html

In any case, both my OSes are 32 bit.

This is the text of the .inf file, if it is needed here:

;

; © Copyright 2002 Cenix Digicom Inc.

;

;

[Version]

Signature="$CHICAGO$"

Class=CenixDigicom

ClassGUID={C772169A-9C78-4022-B77A-E779E8718578}

provider=%CDI%

;CatalogFile=CenixFMC.cat

DriverVer=06/20/2002,1.02

;------------------------------------------

[ClassInstall32]

AddReg=CenixDigicom.AddClassReg

[CenixDigicom.AddClassReg]

HKR,,,,%CenixDigicom.ClassName%

;------------------------------------------

[Manufacturer]

%ManufacturerName%=UsbDeviceList

[usbDeviceList]

%USB\VID_0E56&PID_6008.DeviceDesc%=CENIXFMC.Dev,USB\VID_0E56&PID_6008

%USB\VID_0E56&PID_6009.DeviceDesc%=CENIXFMC.Dev,USB\VID_0E56&PID_6009

[ControlFlags]

ExcludeFromSelect=USB\VID_0E56&PID_6008

ExcludeFromSelect=USB\VID_0E56&PID_6009

;------------------------------------------

[DestinationDirs]

DefaultDestDir=10,System32\Drivers

CENIXFMC.Files.Ext=10,System32\Drivers

CENIXFMC.Files.Inf=10,INF

[CENIXFMC.Dev]

CopyFiles=CENIXFMC.Files.Ext, CENIXFMC.Files.Inf

AddReg=CENIXFMC.AddReg

[CENIXFMC.Dev.NT]

CopyFiles=CENIXFMC.Files.Ext, CENIXFMC.Files.Inf

AddReg=CENIXFMC.AddReg

[CENIXFMC.Dev.NT.Services]

Addservice = CENIXFMC, 0x00000002, CENIXFMC.AddService

[CENIXFMC.AddService]

DisplayName = %CENIXFMC.SvcDesc%

ServiceType = 1 ; SERVICE_KERNEL_DRIVER

StartType = 3 ; SERVICE_DEMAND_START

ErrorControl = 1 ; SERVICE_ERROR_NORMAL

ServiceBinary = %10%\System32\Drivers\CENIXFMC.sys

LoadOrderGroup = Base

[CENIXFMC.AddReg]

HKR,,DevLoader,,*ntkern

HKR,,NTMPDriver,,CENIXFMC.sys

[CENIXFMC.Files.Ext]

CENIXFMC.sys

[CENIXFMC.Files.Inf]

[sourceDisksNames]

;1=%InstallDisk%,,,

[sourceDisksFiles]

CENIXFMC.sys = 1

;CENIXFMC.inf = 1

;---------------------------------------------------------------;

[strings]

CDI="Cenix Digicom Inc."

InstallDisk="Cenix Voice Recorder Installation Disk"

ManufacturerName="Cenix Digicom Inc."

CenixDigicom.ClassName="Cenix Digicom"

USB\VID_0E56&PID_6008.DeviceDesc="Cenix Digicom Digital Voice Recorder"

USB\VID_0E56&PID_6009.DeviceDesc="Cenix Digicom Digital Voice Recorder"

CENIXFMC.SvcDesc="Cenix Digicom Digital Voice Recorder Service"

Anything to solve this prob?

The Device Manager shows these entries under Universal Serial Bus Controllers:

Standard Enhanced PCI to USB Host Controller

Standard OpenHCD USB Host Controller

Standard OpenHCD USB Host Controller

USB Root Hub

USB ROot Hub

USB Root Hub

When installing the drivers for Cenix, a separate section opens up for it (not in the Universal Serial Bus Controllers) with the exclamation mark, and when the thing finishes, that section vanishes.

Thanks.

Tried it, but it didn't work. In XP, nothing happens; I thought maybe it silently installed, but when I rebooted, there was nothing. In Vista, when I right-click and try to install, it gives the message that it can't be installed in this way.

Isn't there anything like a disk explorer for USB devices, so that it will just scan and show the files and then the files can be copied?

Its not a branded one; its P4 3.0 Ghz, 2 GB RAM, MB DG102GGC2 with onboard ATI Radeon eating 256 MBs of the RAM.

At present it is way more updated than it was some months back, when I used this device and it worked without any problem.

I think your board is "Intel? Desktop Board D102GGC2" as "DG102GGC2" gave no response at Intel

BIOS Version 1087

One of the fixes was "Disabled USB OHCI/EHCI MSI capability."

But to make absolutely certain you are best to click here: http://www.intel.com/support/motherboards/...b/CS-009015.htm and identify your board precisely

Sorry, its D102GGC2. Just a typo.

On this page, it shows the latest BIOS version as GC11020M.86A :

http://www.intel.com/support/motherboards/...b/CS-010639.htm

I used Faronics System Profiler, and in the BIOS section, its says:

SMBIOSBIOSVersion : GC11020M.86A.1087.2007.0130.1451

The link you gave, of the pdf file, shows this same number as the latest one, so my BIOS is up to date, but some kind of USB capability has got disabled. What should I do about it?

Thanks for the replies.

Tried Drive Cleanup, it removed 5 USB devices, 1 disk drive, 1 storage volume, and 7 registry key. Then I tried re-installing the driver, and again the computer stopped responding :(

Is it the USB OHCI/EHCI thing that is the culprit? Is there any way around it?

There's an audio recording device I use, called Cenix Digital Voice Recorder.

; ? Copyright 2002 Cenix Digicom Inc.

Only thing I can think of is its not compatible with your version of Windows (including Service Pack)

You may need to go to the Home site to see if there are any drivers updates or patches available

I haven't done this myself, as it may be best for you to check this whilst having all the hardware (and CD) and info (including model number and s/n) available

There may even be a forum

I have found a temporary solution. Since you mentioned the motherboad, I tried the device on my older computer, an Intel D845HV, Pentium 3, 256 MB RAM. The thing worked smooth as anything, and I could get the data out. But I have to get it working on this newer one.

@ kimsland

You have been a great help. Thanks a ton!

Edited by HydraHeaded

I've already tried that link that you've given, it didn't work.

Anyway, I found a solution. I have been trying to contact the guy from whom I bought this device, and finally he sent me an attachment by email, and when I installed it, the device has started working, on the new computer. I tried uploading the .exe, and then a zipped .rar here on the forum as an attachment, but it won't allow me to do it (maybe these extensions are not allowed?).

The attachment he sent was usb2em_0.9.exe (712 KB). I searched for it on the net, there's something here:

http://www.ts-market.com/products/?action=...8&prodId=11

These seem to be simply drivers, right?

Thanks a lot, kimsland, for taking such an active interest! :)

  • 1 year later...

I've already tried that link that you've given, it didn't work.

Anyway, I found a solution. I have been trying to contact the guy from whom I bought this device, and finally he sent me an attachment by email, and when I installed it, the device has started working, on the new computer. I tried uploading the .exe, and then a zipped .rar here on the forum as an attachment, but it won't allow me to do it (maybe these extensions are not allowed?).

The attachment he sent was usb2em_0.9.exe (712 KB). I searched for it on the net, there's something here:

http://www.ts-market.com/products/?action=showProd&grpId=78&prodId=11

These seem to be simply drivers, right?

Thanks a lot, kimsland, for taking such an active interest! :)

I am now facing the same problem as HydraHeaded, with my Cenix Voice Recorder.

I tried the link posted by HydraHeaded (in the quoted post above), but it seems the usb2em_0.9.exe (712 KB) driver is no longer there. (Now it seems they require you to have bought an Edic product from them and have a valid serial number, in order to download their drivers.)

Does anyone here have the usb2em_0.9.exe (712 KB) driver? Or know where I can download it? If so, I'd appreciate it if you could reply below with a download link.

Thanks!

  • 2 weeks later...
  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      455
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!