EFI-X a scam?


Recommended Posts

To make your own you need someone with a Mac. I bought Snow Leopard upgrade and got a friend to "restore" the Snow Leopard disc to an 8Gb USB Memory key, i then downloaded the Chameleon bootloader which is similar to Boot 132 and then imaged that onto the boot of the USB key now i have my own "EFI-X" with built in Installation disc should i ever need to format, theres even a place on the stick where i can put all the kexts i need if i ever change my motherboard, just boot up with the USB and i have an option to boot the install, boot osx or boot windows, its great and it only cost me the price of a USB memory stick and Snow Leopard.

I followed this tutorial, though if you already have the Snow Leopard disc you could just install Chameleon onto a tiny USB stick you have lying around and boot from the DVD, i wanted to have it all on one stick though for convenience.

To make your own you need someone with a Mac. I bought Snow Leopard upgrade and got a friend to "restore" the Snow Leopard disc to an 8Gb USB Memory key, i then downloaded the Chameleon bootloader which is similar to Boot 132 and then imaged that onto the boot of the USB key now i have my own "EFI-X" with built in Installation disc should i ever need to format, theres even a place on the stick where i can put all the kexts i need if i ever change my motherboard, just boot up with the USB and i have an option to boot the install, boot osx or boot windows, its great and it only cost me the price of a USB memory stick and Snow Leopard.

I followed this tutorial, though if you already have the Snow Leopard disc you could just install Chameleon onto a tiny USB stick you have lying around and boot from the DVD, i wanted to have it all on one stick though for convenience.

Thanks. So there's no way at all to do it from within Windows?

Thanks. So there's no way at all to do it from within Windows?

No but it you have Linux installed you can use Linux to install the boot loader to your USB key and use that to boot the Snow leopard DVD that is cloned to a Hard drive or a 8GB USB key. or you could use Boot132 that uses a CD to hold the bootloader and kext to make your Snow Leopard DVD boot for installing.

Wait, wait, wait...I'm not sure I understand this. I was actually going to buy one of these a few months ago but the price totally put me off. I was of the impression it made your PC behave such that you could install OSX as you would on a true Mac with no additional kexts needed or other hackintosh fixes, such that it was running natively. Is that not the case?

For example, a lot of people with hackintoshes can't run Snow Leopard at the moment because of the lack of 64-bit kexts available. The way they were marketing this device was that it shouldn't matter - your PC is now a genuine Mac.

Hmmm. I must offer a counterpoint to all this negativity around the EFI-X. I bought one about 10 months ago and have had almost no issues with it. It took me 30 minutes to install the retail mac os 10.5.6 that I bought for $129 from best buy. I did not need any kexts or tweaks other than a couple of bios settings which are documented clearly on their website. I made sure to follow their recommended hardware specs as follows:-

GA-EP45-UD3L

Intel QUAD Core CPU

Corsair DDR2 Memory 2x2GB

It all worked fine, time machine worked flawlessly and i was able to upgrade to next version of the os without stuffing around with kext modifications or finding a friend with a mac hd and bribing them alcohol etc.

Compare this with the 2 months I spent prior to my EFIX purchase fiddling around with kexts night after night. Don't get me wrong I enjoyed this process but never quite managed to get anything working properly despite the best efforts of the OSX386 community (non sarcastic thanks by the way) I am now in the process of building a mac without EFI-X and am looking forward to the umpteen Kernel panics and KEXT discoveries that I will hopefully make and share along the way. In balance I would say if time is money then EFI-x is not a bad option, especially if you don't want to invest a lot of time in the process and you are comfortable using the latest version of leopard and waiting until they have an update for Snow leopard. Finally even if i were a "genuine mac user" I would not be installing Snow leopard until at least 2 or 3 rounds of updates have fixed all the bugs that haven't been discovered yet.

Hope this is helpful. please don't feel sorry for me as my family an I are all happily enjoying the mac and especially enjoying having violated the EULA after all what's the point of having a line if you don't cross it :)

Lol...I read through the interview and found this:

The EFiX is not a pen-drive at all. Inside it, there is a very powerful CPU and several gigabytes of dedicated static RAM. The module has its own code, language and endless functions. So there is absolutely no way that we even thought about using the patch-a-boo approach of "hackintosh

Yes...a very powerful cpu, and several gigabytes of static ram in a case that small without any cooling or airflow...

How do people even fall for that?

Edited by /- Razorfold

Not to mention that actual static RAM (memory that holds data for as long as its powered. The RAM in your PC does not do this and has to be constantly refreshed) is expensive and is generally measured in kilobits. Maybe they meant to say flash and gigabits. 256MB is 2Gb! Also, the ARM they stuck in their is reasonably powerful as far as microcontrollers go and totally overkill.

Hmmm. I must offer a counterpoint to all this negativity around the EFI-X. I bought one about 10 months ago and have had almost no issues with it. It took me 30 minutes to install the retail mac os 10.5.6 that I bought for $129 from best buy. I did not need any kexts or tweaks other than a couple of bios settings which are documented clearly on their website. I made sure to follow their recommended hardware specs as follows:-

GA-EP45-UD3L

Intel QUAD Core CPU

Corsair DDR2 Memory 2x2GB

It all worked fine, time machine worked flawlessly and i was able to upgrade to next version of the os without stuffing around with kext modifications or finding a friend with a mac hd and bribing them alcohol etc.

Compare this with the 2 months I spent prior to my EFIX purchase fiddling around with kexts night after night. Don't get me wrong I enjoyed this process but never quite managed to get anything working properly despite the best efforts of the OSX386 community (non sarcastic thanks by the way) I am now in the process of building a mac without EFI-X and am looking forward to the umpteen Kernel panics and KEXT discoveries that I will hopefully make and share along the way. In balance I would say if time is money then EFI-x is not a bad option, especially if you don't want to invest a lot of time in the process and you are comfortable using the latest version of leopard and waiting until they have an update for Snow leopard. Finally even if i were a "genuine mac user" I would not be installing Snow leopard until at least 2 or 3 rounds of updates have fixed all the bugs that haven't been discovered yet.

Hope this is helpful. please don't feel sorry for me as my family an I are all happily enjoying the mac and especially enjoying having violated the EULA after all what's the point of having a line if you don't cross it :)

I'm sure the first few people in on a pyramid scheme have nothing good to say as-well :laugh:

Lets just be clear this thing was a scam from start to finish. They took other peoples work and said it was there own, they made several versions of the hardware which was the same exact hardware with some new soldering and different software, they absolutely 100% lied about what the device actually is and does and also what is inside it and they charged over 100x more than it actually costs to make.

I'm sure the first few people in on a pyramid scheme have nothing good to say as-well :laugh:

Lets just be clear this thing was a scam from start to finish. They took other peoples work and said it was there own, they made several versions of the hardware which was the same exact hardware with some new soldering and different software, they absolutely 100% lied about what the device actually is and does and also what is inside it and they charged over 100x more than it actually costs to make.

+1. Even though I've never bought anything from them, I'd like to see them get sued out of oblivion and hopefully justice will be served one way or another. People who do things like this should get prison sentences.

Hmmm. I must offer a counterpoint to all this negativity around the EFI-X. I bought one about 10 months ago and have had almost no issues with it. It took me 30 minutes to install the retail mac os 10.5.6 that I bought for $129 from best buy. I did not need any kexts or tweaks other than a couple of bios settings which are documented clearly on their website. I made sure to follow their recommended hardware specs as follows:-

GA-EP45-UD3L

Intel QUAD Core CPU

Corsair DDR2 Memory 2x2GB

It all worked fine, time machine worked flawlessly and i was able to upgrade to next version of the os without stuffing around with kext modifications or finding a friend with a mac hd and bribing them alcohol etc.

Compare this with the 2 months I spent prior to my EFIX purchase fiddling around with kexts night after night. Don't get me wrong I enjoyed this process but never quite managed to get anything working properly despite the best efforts of the OSX386 community (non sarcastic thanks by the way) I am now in the process of building a mac without EFI-X and am looking forward to the umpteen Kernel panics and KEXT discoveries that I will hopefully make and share along the way. In balance I would say if time is money then EFI-x is not a bad option, especially if you don't want to invest a lot of time in the process and you are comfortable using the latest version of leopard and waiting until they have an update for Snow leopard. Finally even if i were a "genuine mac user" I would not be installing Snow leopard until at least 2 or 3 rounds of updates have fixed all the bugs that haven't been discovered yet.

Hope this is helpful. please don't feel sorry for me as my family an I are all happily enjoying the mac and especially enjoying having violated the EULA after all what's the point of having a line if you don't cross it :)

yeah and your a new member with 1 post do you realy think people will beleave you?

Not really a scam, a scam implies you either never receive something or you do but it doesnt work, EFI-X does its job, you dont have to mess around with drivers, assuming you have hardware on the compatibility list you just plug it in, put the retail OSX in your drive and install, sure you can make your own EFI-X but for those that dont want to they can just buy a ready made device without hassle.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Win11Debloat 06.11.2026 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 06.11.2026 fixes: Fix lock screen spotlight option being disabled when disabling the start recommended section by @Raphire in #619 Fix log message formatting by @Raphire Note The -RemoveCommApps and -RemoveW11Outlook command-line parameters for uninstalling a few specific apps have been removed with this release. If you previously relied on these parameters, please see this wiki page for alternative methods of removing these apps. Download: Win11Debloat 06.11.2026 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yes for me, I installed 'old calculator' (Windows 7 calculator) in its place since it is more useful to me. I think paint is the only one I left installed
    • eh I'll wait for the June 2026 MVS ISO downloads which should be coming out next Tuesday June 16 and possibly contain build 8655 instead of 8653
  • Recent Achievements

    • Rookie
      restore went up a rank
      Rookie
    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      ATLien_0
      82
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!