Recommended Posts

Hi my copy of Win 7 home premium (full) not upgrade arrived today, but not sure which version to install 32bit or 64bit,

my pc can run either, it has a AMD athlon x2 2.6, 4gb ram and a 9800gt, with Vista 32bit.

I use my pc for general use, bit of gaming, photo and video editing etc, Any thoughts would be greatly appreciated.

Thanks in advance Aj

Link to comment
https://www.neowin.net/forum/topic/836696-win7-32bit-or-64bit/
Share on other sites

On a fairly new system with a fairly new accessories (or at least a printer that you know is supported) then I'd go 64bit without question.

64bit was painful under XP (when it first came out). It was mostly ready when Vista shipped but now I'd say that 64bit is mature and ready to go.

I'm stuck on 1gb ram (max supported is 2 on my mobo) so I'm gonna install 32-bit. I ran the 64-bit rtm but most 64-bit apps (itunes, LR I think) are simply emulated (or whatever it is) and not true 64-bit. 32-bit is fine for anyone with less than 3.5gb ram I feel (or rather, those who can't benefit due to mobo limitations)

I had to search far and wide for my W7 (Vista) 64-bit wifi driver - once connected everything else just came in through Windows Update etc.

Windows Vista drivers should work... allnewer hardware will be supported - the only thing I cant find drivers for on my setup is a cheap scanner that is over 10 years old which I used from time to time.

If you are prepared to live without that scanner then go ahead and take the 64bit plunge.

32 bit windows, like standard definition television, is dead. They should stop making 32 bit windows, and make people upgrade. It's been long enough. Vista will still work fine for 32 bit users... part of me prefers it to 7 actually due to the large clunky taskbar but oh well, change happens.

32 bit windows, like standard definition television, is dead. They should stop making 32 bit windows, and make people upgrade. It's been long enough.

I'm pretty sure Win 7 is the last version to have a 32 bit version.. agreed 64 bit is working great for me

On a fairly new system with a fairly new accessories (or at least a printer that you know is supported) then I'd go 64bit without question.

64bit was painful under XP (when it first came out). It was mostly ready when Vista shipped but now I'd say that 64bit is mature and ready to go.

Mostly true, though I still run into a couple incompatibilities here and there, especially for "regular" computer users (which means nobody on Neowin). Basically Apple took a smarter route than Microsoft by allowing 64-bit software to run on a translated 32-bit layer in OSX. This encourages the development of 64-bit code. Microsoft did the opposite. So now you've got the mess we're in where there's little encouragement to compile 64-bit software on the Windows platform since essentially no home computer users have a 64-bit OS even though many of them have 64-bit processors.

The ONLY thing that's going to get 64-bit Windows onto lots of computers is OEM computer sales of rigs with 4GB of memory or more, and then those computers trickling out into the world. The fact that the vast majority of computers in use right now have much less memory means that 64-bit computing on the Windows platform will not be commonplace for several years.

If you don't have to run 32bit, I haven't a clue why you would. Even if you don't have the RAM, there are still benefits... plus the future-proofing if/when you do upgrade.

That said, I have a hard time disagreeing with boogerjones' post. I'm actually curious how many OEMs are going to be pushing out 32bit Win7, even if the computers themselves can run 64bit, too.

That said, I have a hard time disagreeing with boogerjones' post. I'm actually curious how many OEMs are going to be pushing out 32bit Win7, even if the computers themselves can run 64bit, too.

There are netbooks too you know...

Hi my copy of Win 7 home premium (full) not upgrade arrived today, but not sure which version to install 32bit or 64bit,

my pc can run either, it has a AMD athlon x2 2.6, 4gb ram and a 9800gt, with Vista 32bit.

I use my pc for general use, bit of gaming, photo and video editing etc, Any thoughts would be greatly appreciated.

Thanks in advance Aj

Its year 2009, chose 64bit

I decided to go with the 32bit version for now, even though I'm "loosing" 1GB of the 4GB of RAM I have installed. Two reasons:

  1. Ethernet drivers weren't working too well. Transfers on local networks were visibly slower and not very reliable. When playing music from a NAT and trying to copy a large file at the same time, music was stopping for the time of transfer.
  2. DVI video output seemed to be slightly more blurry than with the 32bit version. This may have been just my perception, as I couldn't easily compare two versions side by side, but felt quite strong.

I have a month-old ThinkPad R400 with Intel's graphics.

As for the additional RAM - running the 64bit system casually was eating up 500MB more RAM than 32bit, so I was effectively getting only 512MB more.

For anyone trying to choose right now I'd suggest checking out the 64bit version and testing it thoroughly before activating. If everything works, you may as well stick with it. If not, you'll have a way back to 32bit.

That said, I have a hard time disagreeing with boogerjones' post. I'm actually curious how many OEMs are going to be pushing out 32bit Win7, even if the computers themselves can run 64bit, too.

most oem computers.. at least the ones in bestbuy etc come with 64 bit now.... of course if the oem has drivers for everything it should be alright

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BATorrent 3.0.2 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 3.0.2 changelog: Phone pairing & WebUI The browser WebUI was reskinned to match the desktop app — same dark palette, Inter font, flat surfaces, the real BATorrent logo (it was a random bat before), and a proper magnet icon. It now looks like the same product, not a separate dashboard. Pairing is one tap and zero typing: the generated WebUI password is now copyable, and the QR code carries the credentials — scanning it from your phone logs straight in (no typing the IP or password), then drops the credentials from the address bar. Search Two new providers: RuTor (CIS sources, no login, via a public TorAPI relay) and Torrents-CSV. Results are sorted by seeders (healthiest first), and each search now times out after 15 s so one dead provider can't hang the UI. Files & trackers Per-file priority is back: right-click a file in the detail panel to set Skip / Low / Normal / High. Rename an individual file inside a torrent (double-click or the file menu), separate from renaming the torrent. Remove a tracker from a torrent (the ✕ on a tracker row); adding was already there. Smart Paste on Ctrl+V — paste a magnet, a 40-char info-hash, or a .torrent URL straight from the clipboard and it's added immediately (text fields still paste text normally). Covers & titles Anime fansub naming ([Group] Title - NN) now resolves to the right show. Audio channel layouts in titles (DDP5.1, 7.1, …) are stripped so they don't pollute cover matching. Under the hood The legacy QWidget interface is gone. QML had been the only UI since 3.0.0 (reachable old code lived behind a hidden --legacy flag); with parity confirmed, the entire QWidget layer — main window, every dialog, the theme manager — was removed (~13,400 lines). The four restored actions above were features that backend already supported but the QML port had never wired. macOS: the WebUI password hash moved out of the keychain into app settings, so launching the app no longer pops a login-keychain password prompt on unsigned builds. The actual password still lives in the keychain. Cleanup: ~400 orphaned translation strings and a batch of dead code removed; internal duplication collapsed; an ARCHITECTURE.md added for contributors. Unit / security / memory tests and the ASan/UBSan/TSan sanitizers stay green. Download: BATorrent 3.0.2 | 30.5 MB (Open Source) Download: BATorrent Portable | 42.3 MB Links: BATorrent Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • How about a global switch to turn the awful things off instead of a registry hack? Then everyone wins.
    • This doesn't strike me as so shocking when... " IT admins do have some control over this rollout. If they choose to opt out, devices in their tenant won't automatically get the dreaded Copilot app"
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      PsYcHoKiLLa
      257
    3. 3
      Skyfrog
      79
    4. 4
      ATLien_0
      60
    5. 5
      FloatingFatMan
      60
  • Tell a friend

    Love Neowin? Tell a friend!