What is the 100mb partition Windows 7 SOMETMES creates on install?


Recommended Posts

Windows 7 sometimes automatically asks to create a 100mb partition for system files on startup.

Can anybody tell me just what exactly this partition is? Whats on it? And why sometimes it creates it, and sometimes it doesn't? I've installed Windows 7 on a few systems now, and it seems to be random, what causes it to install and to NOT install this partition? And whats on it? Would it be better to have this partition or not?

Would upgrading from a previous version of Windows but doing a clean install create this partition?

How about installing on a drive that already has existing partitions?

Windows 7 sometimes automatically asks to create a 100mb partition for system files on startup.

Can anybody tell me just what exactly this partition is? Whats on it? And why sometimes it creates it, and sometimes it doesn't? I've installed Windows 7 on a few systems now, and it seems to be random, what causes it to install and to NOT install this partition? And whats on it? Would it be better to have this partition or not?

Would upgrading from a previous version of Windows but doing a clean install create this partition?

How about installing on a drive that already has existing partitions?

It contains boot files and recovery info & If you delete it you will no longer be able to boot you computer

I think it's only created by Ultimate and Business, and only when you install on a bare unpartitioned drive.

Nope, not at all. It's created for the reasons the others mentioned.

He's part right. It is the default system partition created only on empty drives. It holds the boot loader and BitLocker files (if enabled. because you couldn't boot from an encrypted partition) and clearly separates the system partition (which holds the boot loader) from the boot partition (which holds the OS).

If you already have partitions, it will normally make the first NTFS partition on the disk the system partition instead.

It does not contain any recovery stuff, that is located on the boot volumes of the OSes installed (it is OS-dependent and too large to fit on a 100MB partition).

It places it on completely empty computers. If you have another hard drive with a boot sector and another version of windows installed it does not create it.

My friend's laptop had Vista installed, I was helping him install an upgrade version of Win 7, I told it to delete the Vista partition and use the entire drive, it added the 100mb partition.

I usually delete all the partitions then recreate then (about 80 GB each, during the install). Or if the hdd hasnt been formatted yet, I just create the separate partitions. It probably couldnt create the 100mb, even if it wanted to. Well, I cant see any 100mb partitions on this

My friend's laptop had Vista installed, I was helping him install an upgrade version of Win 7, I told it to delete the Vista partition and use the entire drive, it added the 100mb partition.

Exactly, because when you tell it to use the entire drive, it is dealing with an empty drive that it can do whatever it wants to. If there is something else on it, it can't. If people don't want the partition, the best way to avoid it is to manually create your own partition through the installer and then install to that rather then just clicking next/telling it to use the entire drive.

My friend's laptop had Vista installed, I was helping him install an upgrade version of Win 7, I told it to delete the Vista partition and use the entire drive, it added the 100mb partition.

In this instance you told it to clear the computer and then install Windows 7.

If your Vista install was on another hard drive with a boot sector of its own, and then you told it to install on another drive leaving Vista in its place it would not have created the 100mb partition.

In this instance you told it to clear the computer and then install Windows 7.

If your Vista install was on another hard drive with a boot sector of its own, and then you told it to install on another drive leaving Vista in its place it would not have created the 100mb partition.

I see.

Because both the systems I want to install it on have existing partitions.

My Mac Mini will of course have a MACOS partition, and my laptop already has a Ubuntu and OpenSUSE partition.

So I won't be able to get this 100mb system partition on either of them? I know I can delete the Vista partition on my laptop when I install Windows 7 but im not sure if its ok to delete the Windows partition that Boot Camp makes on my Mac Mini when installing windows.

The correct answer for this is because of:

You have one of a few things enabled or maybee all (not that you, yourself enabled it)

1 ) Computer motherboard chipset is set to AHCI in the bios

2) You have a EFI motherboard which the 100MB will store drivers and other data theoretically, not in use very much yet. Not even on a apple machine. Only x86 hackers have made use of this in mainstream

3) Some manufacturers make a system reserved parition with data which is usally a few gigs, since you said it was 100MB only so this is not correct, just a possible use

4) You bios does not have ACHI enabled but the system manufacturer may have used an image with ACHI enabled while cloning drives and you machine gets it by default which would not effect your system from booting... i think

5) This does not have to do with your MBR, as a GUID disk or a MBR formatted disk both will get the 100MB if AHCI is enabled

it will be answer ONE most likley, you can reformat the drive and delete the partition but if ACHI is enabled in the bios it will put the 100MB back everytime.

I can not tell your exact reason for having it with out the PC in front of me but its ONLY the options above. The reason it exist in GENERAL is because its a 100MB parition to be used as a boot loader. As of now not many companies use.

Apple or Microsoft can make use of them but they dont as of now really.

Recent or future used of the 100MB EFI/SYSTEM partition are

1) OSX86 Drivers that site in the EFI until after OSX loads, then OSX will load all drivers in the EFI parition while leaving the OSX install 100% unmodified. This how the OSX86 people get the software update to work as the OSX install is untouched.

Bootloader use

2) Digital Cable Tuner Hack

Loads the bios and OCUR hack and smooshes together to make a hacked OCUR BIOS that the ATI DCT digital cable card reader can use so you watch Digtal Cable on your PC with out the OEM requirement.

Bootloader use, also Microsoft just released an update to Windows 7 in which you no longer need this "Media Center has a new Digital Cable Advisor" which will eliminate the need for this hack and now sizpack joe can have a Cable Card in his PC as like 2-3 weeks ago.

3) Microsoft I heard will be using this parition for Bitlocker Encryption data

Again yet bootloader use.

You gain nothing be deleting it expect 100MB back, with all the possible REAL uses of it I would advise to leave it esp with how much hard drive space people have now a days. I am all for not wasting hard disk space but this has many reasons to keep it.

Cheers

Edited by 1Way Jonny
I see.

Because both the systems I want to install it on have existing partitions.

My Mac Mini will of course have a MACOS partition, and my laptop already has a Ubuntu and OpenSUSE partition.

So I won't be able to get this 100mb system partition on either of them? I know I can delete the Vista partition on my laptop when I install Windows 7 but im not sure if its ok to delete the Windows partition that Boot Camp makes on my Mac Mini when installing windows.

Your mac is EFI enabled with ACHI by default, you do have a 100MB parition called EFI (if you havent seen it), your Windows parition does not see it as its already there for your OSX install and also that your mac uses a custom boot loader while working with the EFI BIOS to boot your windows setup.

You gain nothing be deleting it expect 100MB back, with all the possible REAL uses of it I would advise to leave it esp with how much hard drive space people have now a days. I am all for not wasting hard disk space but this has many reasons to keep it.

On your average system it serves no real purpose. All it has on it is a few megabytes of boot loader files. If you did delete it, you'd have to install the boot loader on the boot partition instead and set that active. Possible, but not really worth the hassle. If you don't want it, manually partition the drive during installation. It's that simple.

On your average system it serves no real purpose. All it has on it is a few megabytes of boot loader files. If you did delete it, you'd have to install the boot loader on the boot partition instead and set that active. Possible, but not really worth the hassle. If you don't want it, manually partition the drive during installation. It's that simple.

Don't do that. Windows creates a separate boot partition for a reason. Lots of other OSes do the same thing. Don't mess with it.

The correct answer for this is because of:

Err, no. The Windows boot partition has nothing to do with the GPT Protective Partition found on most EFI / GPT systems (like Macs), nor is it related to the EISA or other recovery partitions provided by various OEMs.

It is more comparable to the common "/boot" partition created by some Linux installers.

My Mac always uses a 200mb EFI partition, and the 64bit Windows Vista and 7 are EFI enabled OS's if the hardware supports it anyway

and the windows 7 installer is now notifying us that it is going to do this so "WE" the consumers don't keep asking on forums "Where is the last 100mb of my clean install on this HDD" where as before it did it anyway without you ever knowing it happened

Don't do that. Windows creates a separate boot partition for a reason.

Like I said, I wouldn't bother doing it because it's an irrelevant amount of space. I'm just pointing out that if you really want to save the 100MB, you're better off doing it during the installation. I think you're exaggerating slightly when you say "don't do that" though. Other than make it harder to accidentally delete the boot loader, I don't see what it offers your average PC user.

Lots of other OSes do the same thing. Don't mess with it.

Do they? I can't think of any that do. No Linux distribution that I've tried do, FreeBSD doesn't, and, well, what other OSes are left that have any relevance today. I don't think it's common at all to have the boot loader on a separate partition.

It'd be great if people could cite sources from Microsoft.

I don't have any but from researching last time I thought I found out that it held the recovery data. Not the GBs worths that you find on an OEM computer with the ability to "reformat" and reinstall as was when bought but what you boot in to when your computer doesn't boot that holds the necessary tools to repair a computer such as diskpart, etc.

It could make sense that this only appears in Ultimate as my copy at home has it but my laptop (Professional) doesn't for BitLocker.

I really can't be arsed looking for sources as this is just from memory but it'd be great if people debating would to arrive at a proper conclusion.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.7 fixes: Fixed an issue that prevented users from creating meetings without an active license Download: AnyDesk 9.7.7 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      524
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!