What is the 100mb partition Windows 7 SOMETMES creates on install?


Recommended Posts

Windows 7 sometimes automatically asks to create a 100mb partition for system files on startup.

Can anybody tell me just what exactly this partition is? Whats on it? And why sometimes it creates it, and sometimes it doesn't? I've installed Windows 7 on a few systems now, and it seems to be random, what causes it to install and to NOT install this partition? And whats on it? Would it be better to have this partition or not?

Would upgrading from a previous version of Windows but doing a clean install create this partition?

How about installing on a drive that already has existing partitions?

Windows 7 sometimes automatically asks to create a 100mb partition for system files on startup.

Can anybody tell me just what exactly this partition is? Whats on it? And why sometimes it creates it, and sometimes it doesn't? I've installed Windows 7 on a few systems now, and it seems to be random, what causes it to install and to NOT install this partition? And whats on it? Would it be better to have this partition or not?

Would upgrading from a previous version of Windows but doing a clean install create this partition?

How about installing on a drive that already has existing partitions?

It contains boot files and recovery info & If you delete it you will no longer be able to boot you computer

I think it's only created by Ultimate and Business, and only when you install on a bare unpartitioned drive.

Nope, not at all. It's created for the reasons the others mentioned.

He's part right. It is the default system partition created only on empty drives. It holds the boot loader and BitLocker files (if enabled. because you couldn't boot from an encrypted partition) and clearly separates the system partition (which holds the boot loader) from the boot partition (which holds the OS).

If you already have partitions, it will normally make the first NTFS partition on the disk the system partition instead.

It does not contain any recovery stuff, that is located on the boot volumes of the OSes installed (it is OS-dependent and too large to fit on a 100MB partition).

It places it on completely empty computers. If you have another hard drive with a boot sector and another version of windows installed it does not create it.

My friend's laptop had Vista installed, I was helping him install an upgrade version of Win 7, I told it to delete the Vista partition and use the entire drive, it added the 100mb partition.

I usually delete all the partitions then recreate then (about 80 GB each, during the install). Or if the hdd hasnt been formatted yet, I just create the separate partitions. It probably couldnt create the 100mb, even if it wanted to. Well, I cant see any 100mb partitions on this

My friend's laptop had Vista installed, I was helping him install an upgrade version of Win 7, I told it to delete the Vista partition and use the entire drive, it added the 100mb partition.

Exactly, because when you tell it to use the entire drive, it is dealing with an empty drive that it can do whatever it wants to. If there is something else on it, it can't. If people don't want the partition, the best way to avoid it is to manually create your own partition through the installer and then install to that rather then just clicking next/telling it to use the entire drive.

My friend's laptop had Vista installed, I was helping him install an upgrade version of Win 7, I told it to delete the Vista partition and use the entire drive, it added the 100mb partition.

In this instance you told it to clear the computer and then install Windows 7.

If your Vista install was on another hard drive with a boot sector of its own, and then you told it to install on another drive leaving Vista in its place it would not have created the 100mb partition.

In this instance you told it to clear the computer and then install Windows 7.

If your Vista install was on another hard drive with a boot sector of its own, and then you told it to install on another drive leaving Vista in its place it would not have created the 100mb partition.

I see.

Because both the systems I want to install it on have existing partitions.

My Mac Mini will of course have a MACOS partition, and my laptop already has a Ubuntu and OpenSUSE partition.

So I won't be able to get this 100mb system partition on either of them? I know I can delete the Vista partition on my laptop when I install Windows 7 but im not sure if its ok to delete the Windows partition that Boot Camp makes on my Mac Mini when installing windows.

The correct answer for this is because of:

You have one of a few things enabled or maybee all (not that you, yourself enabled it)

1 ) Computer motherboard chipset is set to AHCI in the bios

2) You have a EFI motherboard which the 100MB will store drivers and other data theoretically, not in use very much yet. Not even on a apple machine. Only x86 hackers have made use of this in mainstream

3) Some manufacturers make a system reserved parition with data which is usally a few gigs, since you said it was 100MB only so this is not correct, just a possible use

4) You bios does not have ACHI enabled but the system manufacturer may have used an image with ACHI enabled while cloning drives and you machine gets it by default which would not effect your system from booting... i think

5) This does not have to do with your MBR, as a GUID disk or a MBR formatted disk both will get the 100MB if AHCI is enabled

it will be answer ONE most likley, you can reformat the drive and delete the partition but if ACHI is enabled in the bios it will put the 100MB back everytime.

I can not tell your exact reason for having it with out the PC in front of me but its ONLY the options above. The reason it exist in GENERAL is because its a 100MB parition to be used as a boot loader. As of now not many companies use.

Apple or Microsoft can make use of them but they dont as of now really.

Recent or future used of the 100MB EFI/SYSTEM partition are

1) OSX86 Drivers that site in the EFI until after OSX loads, then OSX will load all drivers in the EFI parition while leaving the OSX install 100% unmodified. This how the OSX86 people get the software update to work as the OSX install is untouched.

Bootloader use

2) Digital Cable Tuner Hack

Loads the bios and OCUR hack and smooshes together to make a hacked OCUR BIOS that the ATI DCT digital cable card reader can use so you watch Digtal Cable on your PC with out the OEM requirement.

Bootloader use, also Microsoft just released an update to Windows 7 in which you no longer need this "Media Center has a new Digital Cable Advisor" which will eliminate the need for this hack and now sizpack joe can have a Cable Card in his PC as like 2-3 weeks ago.

3) Microsoft I heard will be using this parition for Bitlocker Encryption data

Again yet bootloader use.

You gain nothing be deleting it expect 100MB back, with all the possible REAL uses of it I would advise to leave it esp with how much hard drive space people have now a days. I am all for not wasting hard disk space but this has many reasons to keep it.

Cheers

Edited by 1Way Jonny
I see.

Because both the systems I want to install it on have existing partitions.

My Mac Mini will of course have a MACOS partition, and my laptop already has a Ubuntu and OpenSUSE partition.

So I won't be able to get this 100mb system partition on either of them? I know I can delete the Vista partition on my laptop when I install Windows 7 but im not sure if its ok to delete the Windows partition that Boot Camp makes on my Mac Mini when installing windows.

Your mac is EFI enabled with ACHI by default, you do have a 100MB parition called EFI (if you havent seen it), your Windows parition does not see it as its already there for your OSX install and also that your mac uses a custom boot loader while working with the EFI BIOS to boot your windows setup.

You gain nothing be deleting it expect 100MB back, with all the possible REAL uses of it I would advise to leave it esp with how much hard drive space people have now a days. I am all for not wasting hard disk space but this has many reasons to keep it.

On your average system it serves no real purpose. All it has on it is a few megabytes of boot loader files. If you did delete it, you'd have to install the boot loader on the boot partition instead and set that active. Possible, but not really worth the hassle. If you don't want it, manually partition the drive during installation. It's that simple.

On your average system it serves no real purpose. All it has on it is a few megabytes of boot loader files. If you did delete it, you'd have to install the boot loader on the boot partition instead and set that active. Possible, but not really worth the hassle. If you don't want it, manually partition the drive during installation. It's that simple.

Don't do that. Windows creates a separate boot partition for a reason. Lots of other OSes do the same thing. Don't mess with it.

The correct answer for this is because of:

Err, no. The Windows boot partition has nothing to do with the GPT Protective Partition found on most EFI / GPT systems (like Macs), nor is it related to the EISA or other recovery partitions provided by various OEMs.

It is more comparable to the common "/boot" partition created by some Linux installers.

My Mac always uses a 200mb EFI partition, and the 64bit Windows Vista and 7 are EFI enabled OS's if the hardware supports it anyway

and the windows 7 installer is now notifying us that it is going to do this so "WE" the consumers don't keep asking on forums "Where is the last 100mb of my clean install on this HDD" where as before it did it anyway without you ever knowing it happened

Don't do that. Windows creates a separate boot partition for a reason.

Like I said, I wouldn't bother doing it because it's an irrelevant amount of space. I'm just pointing out that if you really want to save the 100MB, you're better off doing it during the installation. I think you're exaggerating slightly when you say "don't do that" though. Other than make it harder to accidentally delete the boot loader, I don't see what it offers your average PC user.

Lots of other OSes do the same thing. Don't mess with it.

Do they? I can't think of any that do. No Linux distribution that I've tried do, FreeBSD doesn't, and, well, what other OSes are left that have any relevance today. I don't think it's common at all to have the boot loader on a separate partition.

It'd be great if people could cite sources from Microsoft.

I don't have any but from researching last time I thought I found out that it held the recovery data. Not the GBs worths that you find on an OEM computer with the ability to "reformat" and reinstall as was when bought but what you boot in to when your computer doesn't boot that holds the necessary tools to repair a computer such as diskpart, etc.

It could make sense that this only appears in Ultimate as my copy at home has it but my laptop (Professional) doesn't for BitLocker.

I really can't be arsed looking for sources as this is just from memory but it'd be great if people debating would to arrive at a proper conclusion.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!