What is the 100mb partition Windows 7 SOMETMES creates on install?


Recommended Posts

  • 9 months later...

if i want to install win7-64bit on a pc now, should i create the partitions myself or let win7 do it and have the 100mb boot partition. Would there be any issues if dual booting with linux for example, or drive imaging software?

^ouch, is that because of dual booting?

Naa its because I was an idiot and tried to install OSX along side Windows - which worked.. but then I wanted rid of it, deleted the partition and tried to repair the windows MBR which failed so had to reinstall Windows 7 on the OSX partition and install EasyBCD to get back into this partition

Its a right mess, later today I am going to delete the 2nd windows partiton, make a new partition as big as free space I have left - copy all my stuff to there, and format - its doing my head in lol

The 100mb is Windows 7 repair partition. Press F8 before Windows boots and you will see a "Repair Your Computer" option. It comes in handy when Windows cannot boot.

Yes, it is also uses for BitLocker, but that's its secondary purpose.

The 100mb is Windows 7 repair partition. Press F8 before Windows boots and you will see a "Repair Your Computer" option. It comes in handy when Windows cannot boot.

Yes, it is also uses for BitLocker, but that's its secondary purpose.

Did you read the thread? The partition does not contain any repair stuff. You can confirm this yourself by simply mounting it. The repair environment is located on the boot volume of the OS it belongs to and is bigger than 100MB (this makes sense if you think about it, since the recovery feature is specific to a single OS, and not the entire system.) The partition is used only to host the boot loader. It is the system volume. The only purpose it serves in current versions of Windows is to enable full volume encryption and to separate the system volume from the boot volumes. In versions before Vista it was common that the system and boot volume was the same, which added complications for systems with multiple OSes installed. You couldn't reformat the volume that was set as both system and boot without also losing the ability to boot from all other boot volumes you had. Having the system volume be a separate dedicated partition makes this easier. It also makes it slightly more difficult to accidentally delete the boot loader. It wasn't that uncommon for novices to delete the "random" files in the root of the disk to "clean it up" and thus end up with an unbootable system.

If none of this is an issue for you, there is absolutely no reason to create the partition if you don't want to. You can manually create the partitions you want in the installer instead, and doing so has no negative consequences.

Did you read the thread? The partition does not contain any repair stuff. You can confirm this yourself by simply mounting it. The repair environment is located on the boot volume of the OS it belongs to and is bigger than 100MB (this makes sense if you think about it, since the recovery feature is specific to a single OS, and not the entire system.) The partition is used only to host the boot loader. It is the system volume. The only purpose it serves in current versions of Windows is to enable full volume encryption and to separate the system volume from the boot volumes. In versions before Vista it was common that the system and boot volume was the same, which added complications for systems with multiple OSes installed. You couldn't reformat the volume that was set as both system and boot without also losing the ability to boot from all other boot volumes you had. Having the system volume be a separate dedicated partition makes this easier. It also makes it slightly more difficult to accidentally delete the boot loader. It wasn't that uncommon for novices to delete the "random" files in the root of the disk to "clean it up" and thus end up with an unbootable system.

If none of this is an issue for you, there is absolutely no reason to create the partition if you don't want to. You can manually create the partitions you want in the installer instead, and doing so has no negative consequences.

The 100 MB system partition is used primarily as BitLocker partition for BitLocker encryption. Additionally, it also holds the Windows Recovery Environment (WinRE) and boot files with boot manager for booting up the computer for troubleshooting when there is no Windows 7 installation DVD disc on hand.

If you don't believe me, try deleting the partition.

The 100 MB system partition is used primarily as BitLocker partition for BitLocker encryption. Additionally, it also holds the Windows Recovery Environment (WinRE) and boot files with boot manager for booting up the computer for troubleshooting when there is no Windows 7 installation DVD disc on hand.

No, it does not. I explained this. The recovery environment is OS-specific. You can't have a single one for all installed OSes. For this reason, it's located in the \Recovery folder on the individual boot volumes (a boot volume is a volume that contains OS files, a system volume is a volume that contains the boot loader). You can confirm this yourself by looking at this folder. You can also confirm that the recovery environment is larger than 100MB by looking at this folder. You can also confirm that it's not located on the 100MB partition by simply mounting it and looking on it. It's a standard NTFS partition. There is no need to wonder or speculate here, you can easily confirm it all yourself.

If you don't believe me, try deleting the partition.

I never create it on my systems in the first place.

  • 4 weeks later...

Its for bitlocker

Actually, it's only created if a partition is the first (or only) primary partition *and* it is greater than 175 GB (the smallest drive or partition I've seen with that dreaded 100 MB unlettered System Restore partition is my 200 GB SATA-150 DiamondMax). My current 500 GB WD Caviar Green WD500AVVS has the same size System Restore partition (it's still unlettered; therefore, it only shows in Disk Management).

In both cases, Windows was installed clean (onto a hard drive without partitions).

Considering that the same 500 GB WD can now officially be considered *paltry* for a desktop drive, 100 MB is chimp-change (no, that is NOT a mis-spelling).

It is the system partition (the proper name for the partition that contains the boot loader), not system restore partition. There's nothing related to system restore or repair on it, just the boot loader. After all these pages, I can't believe this still isn't clear.

It is the system partition (the proper name for the partition that contains the boot loader), not system restore partition. There's nothing related to system restore or repair on it, just the boot loader. After all these pages, I can't believe this still isn't clear.

Err, yes it is a somewhat system repair partition. If you create a managed install with the WAIK (like a lot of OEMs do) you can use that partition to house your OS recovery files, etc. By default it has a few system files and also the boot files, etc, but you CAN use it to repair your computer if you set it up that way.

Err, yes it is a somewhat system repair partition. If you create a managed install with the WAIK (like a lot of OEMs do) you can use that partition to house your OS recovery files, etc. By default it has a few system files and also the boot files, etc, but you CAN use it to repair your computer if you set it up that way.

It's a 100MB partition, so no, you can't fit all these things on it. It should also have been obvious that we are talking about what Windows uses it for by default, since it is the one creating it. You could also mount it and store your porn on it if you wanted, but that doesn't mean porn storage is its purpose. I can't believe it's such a "mystery." It's a standard NTFS partition and you can freely check what's on it.

It's a 100MB partition, so no, you can't fit all these things on it. It should also have been obvious that we are talking about what Windows uses it for by default, since it is the one creating it. You could also mount it and store your porn on it if you wanted, but that doesn't mean porn storage is its purpose. I can't believe it's such a "mystery." It's a standard NTFS partition and you can freely check what's on it.

Yes, the default contents of that drive are basically the boot manager & system volume info, as well as a few more random files (plus bitlocker if you are using it).

But you are totally wrong in the fact that you can't put a recovery image on there. With WAIK you can put whatever you want, and create the partition as big as you want. This is what OEMs are now using for Win7, and we have done the same at my workplace (usually a 5GB partition with a custom image.wim with our default image/software).

But you are totally wrong in the fact that you can't put a recovery image on there. With WAIK you can put whatever you want, and create the partition as big as you want. This is what OEMs are now using for Win7, and we have done the same at my workplace (usually a 5GB partition with a custom image.wim with our default image/software).

You can also create 52 other partitions as well of various sizes, and fill them with various random things if you want. One for each week of the year. What this thread is about is the one hundred megabytes (100 MB) large partition that Windows creates by itself to host the boot loader, nothing else.

The 100MB partition is created for the Windows 7 Bitlocker feature.

Info

"As a result, Windows 7 automatically creates the necessary disk partitions during installation to greatly simplify BitLocker deployments."

I think it's only created by Ultimate and Business, and only when you install on a bare unpartitioned drive.

Incorrect, I have it on Professional x64 (Windows 7).

It I do believe contains boot files and system files, which should be left alone and not deleted ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • There is a default resolution setting in Settings > Display that can be changed with a click. You can also change the settings on a per-game basis. No CLI needed. Also, Steam has countless games that are not "[perpetual] alpha/beta games", so no need for the straw man. Plus you can use other stores as well. And console games (e.g. PS5) cost a fortune, which itself more than negates the price subsidy on the system, unless you plan on exclusively playing 1 or 2 games. It's true that you shouldn't buy a system that doesn't support the game(s) you want to play, but I think that's kinda obvious, and applies to every console as well as PC. I don't game in the living room and have no need of a Steam Machine, but there is a clear market segment that would find it useful.
    • RSS Guard 5.2.0 by Razvan Serea RSS Guard is a simple (yet powerful) feed reader. It is able to fetch the most known feed formats, including RSS/RDF and ATOM. It's free, it's open-source. RSS Guard currently supports Czech, Dutch, English, French, German, Italian. RSS Guard will never depend on other services - this includes online news aggregators like Feedly, The Old Reader and others. RSS Guard is developed on top of the Qt library and it supports these operating systems: Windows GNU/Linux OS/2 (eComStation) Mac OS X xBSD (possibly) Android (possibly) other platforms supported by Qt The core features of RSS Guard are: support for online feed synchronization via plugins, Tiny Tiny RSS (from RSS Guard 3.0.0). multiplatform, support for all feed formats, simplicity, import/export of feeds to/from OPML 2.0, downloader with own tab and support for up to 6 parallel downloads, message filter with regular expressions, feed metadata fetching including icons, simple Adblock functionality, customized popup notifications, Google-based auto-completion for internal web browser location bar, ability to cleanup internal message database with various options, enhanced feed auto-updating with separate time intervals, multiple data backend support, SQLite (in-memory DBs too), MySQL. is able to specify target database by its name (MySQL backend), “portable” mode support with clever auto-detection, feed categorization, drap-n-drop for feed list, automatic checking for updates, ability to discover existing feeds on websites, full support of podcasts (both RSS & ATOM), ability to backup/restore database or settings, fully-featured recycle bin, printing of messages and any web pages, can be fully controlled via keyboard, feed authentication (Digest-MD5, BASIC, NTLM-2), handles tons of messages & feeds, sweet look & feel, fully adjustable toolbars (changeable buttons and style), ability to check for updates on all platforms + self-updating on Windows, hideable main menu, toolbars and list headers, KFeanza-based default icon theme + ability to create your own icon themes, fully skinnable user interface + ability to create your own skins, “newspaper” view, plenty of skins, support for "feed://" URI scheme, ability to hide list of feeds/categories, open-source development model based on GNU GPL license, version 3, tabbed interface, integrated web browser with adjustable behavior + external browser support, internal web browser mouse gestures support, desktop integration via tray icon, localizations to some languages, Qt library is the only dependency, open-source development model and friendly author waiting for your feedback, no ads, no hidden costs. RSS Guard 5.2.0 changelog: Added: Feed auto-fetch can now also be delayed while Feral GameMode is active on Linux and startup auto-fetch is skipped when GameMode is already active. (#2265) WebEngine builds can now use RSS Guard generated proxy auto-config (PAC) rules so article/web browsing follows per-account and per-feed proxy settings more closely. (#2273) Generated PAC rules now also cover related subdomains and use Public Suffix List data, so feeds such as feeds.bbc.co.uk can also proxy resources from images.bbc.co.uk. (#2273) Standard feeds can now define extra proxy domains, useful when article images, stylesheets or other page resources are loaded from a CDN or another domain that should use the same feed proxy. (#2273) RSS Guard now asks for proxy credentials when a WebEngine page needs proxy authentication and can fill credentials from the current feed proxy when available. (#2273) Network settings again include an option to ignore all cookies, which clears stored cookies and prevents new cookies from being accepted. Standard RSS/ATOM feeds can now individually ignore cookies while downloading feed data. Stored cookies can now be deleted from the Tools menu. Custom skin colors can now override the feed list article count color separately from feed titles, including a separate highlighted color. (#2275) Settings dialog can now search across available settings and highlight matching controls. (#1754) Standard RSS/ATOM feeds can now optionally be reported as broken when they are valid but contain no articles. (#2039) Standard RSS/ATOM feeds can now override the application-wide feed connection timeout per feed. (#1023) Tray icon can now use a custom background color and unread-count text color, with an option to reuse the generated icon as the application icon. (#1973) Support for more benevolent parsing of Gemlog entries (#2295). Article list can now show when an article was received by RSS Guard. (#947) Feed deep discovery now actually scrapes all links found in the website and checks if they are feeds or not. This greatly enhances usability of the deep discovery mode and discovers many more feeds than before. (#2306) Search boxes now show a small dot when the feed or article list is hiding some items because of active filtering. (#873) Articles now have a shortcut-assignable action to open the homepage of the feed they belong to. (#2060) Fixed: Parallel feed updates no longer crash when multiple update results are processed at the same time. (64cf521) Links in WebEngine articles opened from feeds such as Kill the Newsletter now open correctly instead of being swallowed by the embedded page. (#2272) Relative article URLs resolution was kinda broken. (#2282) Clicking article URL did not work when the URL had "fragment" set. (#2293) The default proxy setting now uses Qt/system default proxy behavior instead of forcing no proxy. (e0263ad) WebEngine article loading now keeps the current feed context, so feed-specific proxy credentials remain available while the article page loads. (fdd0f00) Download: RSS Guard 5.2.0 (64-bit) | Portable | ~ 130.0 MB (Open Source) Link: RSS Guard Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is gonna separate the creeps from the rest of the crowd.
    • "Claude, is our CEO a compete and utter fool by wasting money on AI in this already worthless Teams chat?"
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!