What is the 100mb partition Windows 7 SOMETMES creates on install?


Recommended Posts

  • 9 months later...

if i want to install win7-64bit on a pc now, should i create the partitions myself or let win7 do it and have the 100mb boot partition. Would there be any issues if dual booting with linux for example, or drive imaging software?

^ouch, is that because of dual booting?

Naa its because I was an idiot and tried to install OSX along side Windows - which worked.. but then I wanted rid of it, deleted the partition and tried to repair the windows MBR which failed so had to reinstall Windows 7 on the OSX partition and install EasyBCD to get back into this partition

Its a right mess, later today I am going to delete the 2nd windows partiton, make a new partition as big as free space I have left - copy all my stuff to there, and format - its doing my head in lol

The 100mb is Windows 7 repair partition. Press F8 before Windows boots and you will see a "Repair Your Computer" option. It comes in handy when Windows cannot boot.

Yes, it is also uses for BitLocker, but that's its secondary purpose.

The 100mb is Windows 7 repair partition. Press F8 before Windows boots and you will see a "Repair Your Computer" option. It comes in handy when Windows cannot boot.

Yes, it is also uses for BitLocker, but that's its secondary purpose.

Did you read the thread? The partition does not contain any repair stuff. You can confirm this yourself by simply mounting it. The repair environment is located on the boot volume of the OS it belongs to and is bigger than 100MB (this makes sense if you think about it, since the recovery feature is specific to a single OS, and not the entire system.) The partition is used only to host the boot loader. It is the system volume. The only purpose it serves in current versions of Windows is to enable full volume encryption and to separate the system volume from the boot volumes. In versions before Vista it was common that the system and boot volume was the same, which added complications for systems with multiple OSes installed. You couldn't reformat the volume that was set as both system and boot without also losing the ability to boot from all other boot volumes you had. Having the system volume be a separate dedicated partition makes this easier. It also makes it slightly more difficult to accidentally delete the boot loader. It wasn't that uncommon for novices to delete the "random" files in the root of the disk to "clean it up" and thus end up with an unbootable system.

If none of this is an issue for you, there is absolutely no reason to create the partition if you don't want to. You can manually create the partitions you want in the installer instead, and doing so has no negative consequences.

Did you read the thread? The partition does not contain any repair stuff. You can confirm this yourself by simply mounting it. The repair environment is located on the boot volume of the OS it belongs to and is bigger than 100MB (this makes sense if you think about it, since the recovery feature is specific to a single OS, and not the entire system.) The partition is used only to host the boot loader. It is the system volume. The only purpose it serves in current versions of Windows is to enable full volume encryption and to separate the system volume from the boot volumes. In versions before Vista it was common that the system and boot volume was the same, which added complications for systems with multiple OSes installed. You couldn't reformat the volume that was set as both system and boot without also losing the ability to boot from all other boot volumes you had. Having the system volume be a separate dedicated partition makes this easier. It also makes it slightly more difficult to accidentally delete the boot loader. It wasn't that uncommon for novices to delete the "random" files in the root of the disk to "clean it up" and thus end up with an unbootable system.

If none of this is an issue for you, there is absolutely no reason to create the partition if you don't want to. You can manually create the partitions you want in the installer instead, and doing so has no negative consequences.

The 100 MB system partition is used primarily as BitLocker partition for BitLocker encryption. Additionally, it also holds the Windows Recovery Environment (WinRE) and boot files with boot manager for booting up the computer for troubleshooting when there is no Windows 7 installation DVD disc on hand.

If you don't believe me, try deleting the partition.

The 100 MB system partition is used primarily as BitLocker partition for BitLocker encryption. Additionally, it also holds the Windows Recovery Environment (WinRE) and boot files with boot manager for booting up the computer for troubleshooting when there is no Windows 7 installation DVD disc on hand.

No, it does not. I explained this. The recovery environment is OS-specific. You can't have a single one for all installed OSes. For this reason, it's located in the \Recovery folder on the individual boot volumes (a boot volume is a volume that contains OS files, a system volume is a volume that contains the boot loader). You can confirm this yourself by looking at this folder. You can also confirm that the recovery environment is larger than 100MB by looking at this folder. You can also confirm that it's not located on the 100MB partition by simply mounting it and looking on it. It's a standard NTFS partition. There is no need to wonder or speculate here, you can easily confirm it all yourself.

If you don't believe me, try deleting the partition.

I never create it on my systems in the first place.

  • 4 weeks later...

Its for bitlocker

Actually, it's only created if a partition is the first (or only) primary partition *and* it is greater than 175 GB (the smallest drive or partition I've seen with that dreaded 100 MB unlettered System Restore partition is my 200 GB SATA-150 DiamondMax). My current 500 GB WD Caviar Green WD500AVVS has the same size System Restore partition (it's still unlettered; therefore, it only shows in Disk Management).

In both cases, Windows was installed clean (onto a hard drive without partitions).

Considering that the same 500 GB WD can now officially be considered *paltry* for a desktop drive, 100 MB is chimp-change (no, that is NOT a mis-spelling).

It is the system partition (the proper name for the partition that contains the boot loader), not system restore partition. There's nothing related to system restore or repair on it, just the boot loader. After all these pages, I can't believe this still isn't clear.

It is the system partition (the proper name for the partition that contains the boot loader), not system restore partition. There's nothing related to system restore or repair on it, just the boot loader. After all these pages, I can't believe this still isn't clear.

Err, yes it is a somewhat system repair partition. If you create a managed install with the WAIK (like a lot of OEMs do) you can use that partition to house your OS recovery files, etc. By default it has a few system files and also the boot files, etc, but you CAN use it to repair your computer if you set it up that way.

Err, yes it is a somewhat system repair partition. If you create a managed install with the WAIK (like a lot of OEMs do) you can use that partition to house your OS recovery files, etc. By default it has a few system files and also the boot files, etc, but you CAN use it to repair your computer if you set it up that way.

It's a 100MB partition, so no, you can't fit all these things on it. It should also have been obvious that we are talking about what Windows uses it for by default, since it is the one creating it. You could also mount it and store your porn on it if you wanted, but that doesn't mean porn storage is its purpose. I can't believe it's such a "mystery." It's a standard NTFS partition and you can freely check what's on it.

It's a 100MB partition, so no, you can't fit all these things on it. It should also have been obvious that we are talking about what Windows uses it for by default, since it is the one creating it. You could also mount it and store your porn on it if you wanted, but that doesn't mean porn storage is its purpose. I can't believe it's such a "mystery." It's a standard NTFS partition and you can freely check what's on it.

Yes, the default contents of that drive are basically the boot manager & system volume info, as well as a few more random files (plus bitlocker if you are using it).

But you are totally wrong in the fact that you can't put a recovery image on there. With WAIK you can put whatever you want, and create the partition as big as you want. This is what OEMs are now using for Win7, and we have done the same at my workplace (usually a 5GB partition with a custom image.wim with our default image/software).

But you are totally wrong in the fact that you can't put a recovery image on there. With WAIK you can put whatever you want, and create the partition as big as you want. This is what OEMs are now using for Win7, and we have done the same at my workplace (usually a 5GB partition with a custom image.wim with our default image/software).

You can also create 52 other partitions as well of various sizes, and fill them with various random things if you want. One for each week of the year. What this thread is about is the one hundred megabytes (100 MB) large partition that Windows creates by itself to host the boot loader, nothing else.

The 100MB partition is created for the Windows 7 Bitlocker feature.

Info

"As a result, Windows 7 automatically creates the necessary disk partitions during installation to greatly simplify BitLocker deployments."

I think it's only created by Ultimate and Business, and only when you install on a bare unpartitioned drive.

Incorrect, I have it on Professional x64 (Windows 7).

It I do believe contains boot files and system files, which should be left alone and not deleted ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.7 fixes: Fixed an issue that prevented users from creating meetings without an active license Download: AnyDesk 9.7.7 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I used a Pixel 10 Pro XL when it first came out for about 8 months. When I first got it, it was using Google assistant and that was fast, when asking it to call somone etc. Then it automatically switched with some update to Gemini. Doing even the simplist of things like asking it to call someone in my contacts was soooooo slow compared to Google assistant. I guess it had to go out to the cloud to do that? Back on iPhone and while Siri is dumb right now, it does do those simple things, like call someone, set a timer, star the stop watch etc, really fast. That an while I like Google Material Design 3 over iOS 26, they Pixel 10 Pro XL was so slow in comparison to the iPhone 17 Pro I am using.
    • I use Gemini in my rotation of AI clients...that work pays for. It is good at most things, better than copilot for imgage searching and making images, worse at writing vs Claude and way worse at hadling technical issues when it comes to Azure stuff. I also use YT premium and maps. Anything else Google is a pass for me. I have now seen multiple people locked out of their Google accounts for reasons that are just very vauge.
    • Microsoft is building an AI datacenter that "uses less water than a fast food restaurant" by Ivan Jenic Image: Microsoft Microsoft has announced plans to build a new datacenter campus in Pecos, Texas, as the company continues to invest billions in AI infrastructure. The new facility, called project Kilby, will reportedly have a capacity of 2 gigawatts and will be one of the largest single capacity additions in the company’s history. To power the campus, Microsoft signed a 20-year deal with Chevron to supply natural gas from the Permian Basin, America's largest oil field. This deal is set to become the largest collaboration to date between a U.S. oil and gas giant and Big Tech. It’s no secret that Big Tech has often been criticized for exploiting natural resources for its AI developments. Microsoft is trying to mitigate some of that negative consensus by promising to build its own power supply for the new datacenter, independent of the public grid. The Pecos datacenter will be powered by a power plant hub, built by Chevron, with up to 2.5 gigawatts of gas-fired capacity, with potential to scale to up to 5 gigawatts. The facility will include at least seven GE Vernova turbines, with first power potentially coming online as early as late 2027 or early 2028. The power plant hub is part of an approximately $7 billion investment by Chevron, making it one of the largest dedicated energy projects tied to a single datacenter campus in the U.S. Microsoft hasn’t publicly disclosed the amount it’s investing in the new datacenter. Microsoft has also committed to implementing a closed-loop cooling system that will only require an initial water charge to operate. The company said that “the total lifecycle water use of this datacenter is only a fraction of that consumed annually by a typical fast-food restaurant.” What the press release doesn’t mention, however, is how much water the natural gas plant itself will consume, or how a 20-year fossil fuel commitment squares with the company's pledge to be carbon negative by 2030. The construction of the new datacenter should provide over 6,000 construction jobs at peak build-out, and create hundreds of operational job roles once the facility is built. Via: Reuters
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      525
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!