iMac, Leopard - Inconsistent experience with USB


Recommended Posts

So I've got an Intel iMac, three USB ports on the back. I'm also using an external display, a Dell 2005FPW monitor which has 4 USB ports on it. So we have a cable running from one USB port on the iMac to the Dell, acting as a hub.

When I start the machine up, for some reason none of the devices attached to the Dell monitor function, until I disconnect and reconnect the cable connecting the iMac to the hub. Then the devices spring into action, running at full USB 2.0 speed. I don't recall having this problem before about 2 months ago, when perhaps I changed some kind of power management setting? A pure guess.

Placed in the Software section here at Neowin but could easily be a Hardware problem - will move if someone can clarify :) Thanks in advance for any help. And to those who have seen this retweeted from my feed, you can find a link to my profile in my signature to reply there.

Rob,

It could absolutely be a hardware problem, but what I do know from working with a bunch of different Dell monitors is that the hubs are powered on or off with the power of the monitor itself, so if you were to wait to turn on your Dell monitor until after you arrived at the OSX desktop, I would bet that your devices would all appear.

I had a similar experience with a hard drive just yesterday and I would tell you that it was a FAT hard drive, not a GUID hard drive, and I was able to reproduce it. As long as I disconnected the USB cable from the computer and reconnected it, the computer saw the hard drive just fine. But booting with the hard drive already connected was a no-go.

So, for that matter, does turning the monitor off and on again help get the devices recognized?

(It's been my experience that turning the monitor off also cuts power to the hub, but I have not personally handled a 2005fpw so I could be wrong in your case.)

I'll be curious to find out if it's something completely unrelated to anything I'm proposing here.

Rob

Hi Rob, thanks for taking the time to respond, and even to register to respond by the looks of things!

'Hard' turning the monitor off, i.e. at the electrical mains, and then powering it on after OS X has booted does indeed work, and seems to have the same effect as disconnecting and reconnecting the USB cable. However if I merely turn the monitor off via the switch on the front, and then turn it back on again, it has no effect. That said, if the USB hub is already functioning (after I've disconnected and reconnected the cable from the iMac), 'soft' powering off the monitor keeps the attached USB devices powered and fully functioning.

Eeek! I can't even plug my ipod into my dell monitors because if the monitor goes into power saving mode it cuts the charging to the ipod, which I find completely absurd.

You haven't itemized what you have connected to the dell's hub, but if you connected one item at a time and tried every possible combination, I bet you could figure out that one particular peripheral is causing the group to not get auto-recognized.

I'd bet it was a hard drive. But I'd also bet that more than one combination could get that hub to fail. The Dell hubs in the monitors are just disappointing... and I personally think from my observations over the long haul that using the power saving features really make a long term difference in the monitor's life, so I'm not about to turn off the power saving features.

I'm not sure why they bothered to put FOUR usb ports - mind you, 2 underneath in the back, right? (All mine have 2 ports completely out of the way in the back) --- that power off as soon as I leave my monitor for 15+ minutes... seems absurd to me.

But I'll also add that I have tried NUMEROUS brands of powered USB ports and I believe that more than one brand failed on me and destroyed different equipment. I mention this only because I think this technology with powered hubs is an issue. I now run a hackintosh with 10 USB ports so I actually don't have to routinely use a hub at all anymore. If your device has its own power source, then the hub theoretically doesn't need to be powered.... but my point is just that powered hubs are tricky.

I organize my USB cables such that if I have to use a hub I use a non-powered 4 port hub, and for anything that won't work with that 4 port hub, I use a long enough USB cable to connect that item directly to the computer. I just avoid powered hubs at all costs. The last hub fried my printer that I love dearly and I just won't take that risk again.

Rob

You know I think you might be right about it being a hard drive. But in fact, I keep the external hard drives powered off until I need them, so they shouldn't be interfering. You're also right about USB hubs in general - I hate the things, had nothing but trouble, but at least on Windows I found the Dell monitor, being self-powered, to function pretty adequately. But something's just causing trouble here.

Connected to the Dell are an Apple dock (side of monitor), Freecom external USB drive (side of monitor), USB Audio Interface (bottom of monitor) and Seagate external USB drive (bottom of monitor). I would agree that some of these ought to be connected directly, but I believe it was when I was having issues with my keyboard being recognised that out of sheer frustration I plugged the mouse and keyboard directly into the iMac and everything else on the hub. Out of all of those devices though, the two most likely to work would be the low-powered peripherals!

I think it could be the USB Audio Interface. Let me power that off and reboot the machine, and see if the dock works without having to dis/reconnect.

Success! Looks like it was an overload of high-power devices on the USB hub, specifically a HDD and the USB Audio Interface. Shifted them around (was sure I had tried this before but perhaps kept the USB Audio Interface there) and now things seem to be loading properly. Many thanks.

When I think about it now, it seems such a rookie mistake. Suspect it was a case of 'this is the only free port, plug it in regardless' without thinking. Oh well :)

I have a MBP with an Apple Cinema Display and a powered Belkin hub. My MBP ports and my ACD ports have no problem with anything, but my Belkin hub will sometimes drop out if I connected another peripheral to it (say, plugging in my iPhone). One time, it corrupted my backup drive during a backup.

Moral of the story: most USB hubs suck. :p

Unfortunately I was too hasty in proclaiming success - the problem reoccurred this morning when I rebooted the machine. Said it couldn't find a mouse or keyboard (no LED lights on them either) until I disconnected and reconnected the monitor's USB cable. Any other suggestions?

Hmmm if you go into "About this Mac" and "More Info" ... can you grab a screenshot of the detail box where the hub is displayed?

I have a feeling this is a "wrongly" designed hub, that although it appears to have power, it is really acting like an unpowered hub.

Although if I look through other notes on Dell monitors, the two on the side are supposed to be low power and the two on the back are supposed to be full power, but you'll have no way of seeing that via the "about this mac" screen - and that may be exactly where the gap is that causes this incompatibility of sorts.

Now based on my preceding paragraph, one would connect hard drives to the side, and audio and hub to the back. Keyboard and mouse would be on the back too. Anything with it's own plug would go on the side....

If you were to follow that rule, that you only use items with their own plug/power on the side, does that make the problem any better?

Rob

Unfortunately no; everything that's plugged into the monitor is entirely unpowered and nonresponsive until I disconnect and reconnect the upstream/downstream master USB connection to the iMac.

We currently have:

iMac - USB port 1 - connection to Dell 2005FPW

iMac - USB port 2 - M-Audio interface

iMac - USB port 3 - Freecom HDD

Dell - USB port 1 (side) - Mouse

Dell - USB port 2 (side) - iPhone

Dell - USB port 3 (underneath) - Seagate HDD

Dell - USB port 4 (underneath) - Keyboard

Dell - Upstream USB port to iMac.

And the screenshot you requested: http://qkpic.com/fad71

I think you have truly proven that there is an incompatibility here - I think the power is just inconsistent... We could juggle and experiment, but I don't think any of that will help you solve the problem. I think either the Mac or the Dell is adjusting power incorrectly based on signals it's getting through the usb line. I don't think it's THAT intelligent, but some kind of signaling/switching simply isn't functioning correctly here.

What you do need to do is connect an unpowered hub to the back of the iMac, and just go with something that will be not-unsightly. That will spread things out enough that you can just connect things however most convenient for you.

Stay away from Belkin entirely - Linksys and IOGear are good bets. Newegg.com is a good resource for sensible product reviews.

Thanks so much for your continued help here! Have tried one last attempt at fixing things by plugging the monitor into a separate power socket compared with the power strip the rest of the devices are in. Could be that it's simply being underpowered? Will let you know!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Just when I thought EA couldn't go lower. They surpassed my expectations
    • The GEEKOM A8 mini PC is 20% off (lower than Prime Day pricing) plus Huge Storewide Sale by Steven Parker GEEKOM is back with a deal on a variant of its A8 Mini PC powered by AMD's Ryzen 7 8945HS, which came out in 2024 with a TDP of just 45W, with a base clock of 3.8 GHz and a Turbo Boost of 4.9 GHz; although we never reviewed this variant, we did check out the Ryzen 9 version. As a reminder of what you get, below are the specifications for this Mini PC. GEEKOM A8 Dimensions 112.4 mm x 112.4 mm x 37 mm Weight 450g CPU Ryzen 7 8745HS (8 cores, 16 threads, 16MB L3 cache, 3.8 - 4.9 GHz, TDP: 45 W) cTDP: 35-54W (Default 45W) Graphics AMD Radeon™ 780M Graphics 12 RDNA 3 Graphics Cores 2700MHz 768 shading units / stream processors (12 CUs), 48 texture mapping units, and 32 ROPs NPU XDNA architecture (Up to 16 NPU TOPS) Memory 16GB Dual-channel Crucial DDR5-5600MT/s SODIMM (up to 64GB) Storage 1TB NVMe M.2 (PCIe Gen 4.0 x4) Operating System Windows 11 Pro Bluetooth Bluetooth v5.2 Wireless LAN Wi-Fi 6E Kensington Lock No SD Card reader Yes (left side) Adapter 120W, 6.32A, 19V Power Adapter Front I/O Ports 2 x USB 3.2 Gen 2 Type-A 1 x 3.5mm front stereo headset jack Rear I/O Ports 1 x USB 3.2 Gen 2 Type-A 1 x USB 4 Gen 3 Type-C with Power delivery up to 15W (5V 3A) 1 x USB 3.2 Gen 2 Type-C 1 x USB 2.0 Type-A 2 x HDMI 2.0b 1 x 2.5G RJ45 LAN 1 x DC-in Deal Price $519 (buying links below) GEEKOM has two configurations of the A8, with the only difference being the slightly less-powerful Ryzen 7 CPU with half the storage (1TB) and DDR5 memory (16GB). This knocks $350 off the price compared to the $999 Ryzen 9 configuration. In both instances, a Windows 11 Pro license is also pre-loaded. As I said previously, this appears to be an update on the A7 with the only difference being the newer CPU. The packaging has changed quite a bit from the A7. Instead of dark colors, now the box is completely white, and the foam cushion has been replaced by a cardboard mould that the A8 sits in, above a small envelope that contains a thank you card and booklet that has guidance on all of the controls, how to access the A8 to swap out the SSD or memory, and safety information in several European languages. Upon removing the cardboard mould, you can find another cardboard compartment that contains the power lead, HDMI cable, VESA plate, and a bag of screws. What’s In The Box 1 x A8 Mini PC 1 x Power Adapter 1 x HDMI Cable 1 x VESA plate and bag of screws 1 x Envelope with booklet and Thank you card Unlike the A7, the VESA mount option is back with the A8. In short, you have everything you need to get started. All products sold by GEEKOM receive a 3-year free Warranty from the date you receive the product. If needed, you can RMA or return locally relative to your region (the U.S. has a U.S. warehouse, mainland E.U. has a German warehouse). GEEKOM A8 at GEEKOM U.S. for $519 was $649 (20% off) GEEKOM A8 at GEEKOM U.K. for £503 was £629 (20% off) GEEKOM A8 at GEEKOM CA for $735.20 was $919 (20% off) Use coupon code NWGKA820 when checking out. This flash deal expires on July 2. Next up is the highest savings on the A7 Max series of Mini PC in the Spring Sale. The GEEKOM [2026 Edition] A7 MAX with AMD Ryzen 9 7940HS, 16GB DDR5, and 1TB SSD. Operating System: Windows 11 Pro CPU Model: Ryzen 9 7940HS CPU Speed: 5.2 GHz Cache Size: 24 MB Graphics Card Description: Integrated Graphics Coprocessor: AMD Radeon 780M Memory Storage Capacity: 16GB DDR5 SSD: 1 TB We reviewed this Mini PC back in January, and praised it for its modern internals like a dedicated NPU and DDR5 memory; as such, it is more than capable of keeping up with today's offerings of Mini PC on the market. GEEKOM A7 Max at GEEKOM U.S. for $587 (was $699) 16% off GEEKOM A7 Max at GEEKOM U.K. for £551 was £689 (20% off) Use coupon code NWGKA7MAX when checking out. This flash deal expires on July 2. Huge Summer Sale If the above deals don't tickle your fancy, from today, there are deep discounts on a range of other GEEKOM products. From June 15 to June 30, the GEEKOM Official Store will be running its Summer Sale, with discounts starting from 15% off across the entire lineup, up to 50%! This is their biggest promotion of the year so far, offering pricing that is even lower than select Prime Day deals. You can check out the discounts at the dedicated Summer Sale landing pages below. GEEKOM U.S. Summer Sale GEEKOM U.K. Summer Sale What's more, all products from GEEKOM receive a 3-year free Warranty from the date you receive the product. If needed, you can RMA or return locally relative to your region (the U.S. has a U.S. warehouse, mainland E.U. has a German warehouse, the U.K. has a U.K. warehouse, Australia has an AU warehouse). While the Summer Sale ends on June 30, deals on the A8 and A7 Max will remain active until July 2.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      85
  • Tell a friend

    Love Neowin? Tell a friend!