How do UK postal codes work?


Recommended Posts

My mate thinks a postal code is for a small area of a street, whereas I believe a postal code links one side of a street and the other side has a different postal code as that's how it's been at the 11 places I've lived.

Which is more correct?

Link to comment
https://www.neowin.net/forum/topic/852138-how-do-uk-postal-codes-work/
Share on other sites

First two letters are sorting office, next number is an area in the catchment area that the delivery office delivers to and also which delivery office to send the post to, the next number is the area of town around the delivery office and the last 2 letters signify a group of house numbers up to 80 i think.

tecnically, its both.

our postcode encompases 1 side of the road and about 1/2 of it lengthwise.

i think theres 5 postcodes used on my road. and thers only 150 houses.

That's really strange. In all the places I've lived, some really long roads included, there are only and always two postal codes used.

We have two postcodes, one for each side of the street (one for the odd numbers on our side, one for the evens on the other). The only difference is the letter at the end though. It probably depends on the layout of the street (i.e. if it's a cul-de-sac, non-through road, etc) and the number of houses.

Postcodes can, and do now at mail centres, resolve down to individual residences, even if you share the same postcode.

There's an extra 2 digit alpha-numeric that's hidden from "end users", so a postcode for buckingham palace would not be SW1 1AA but actually SW1 1AA 1A.

Post codes are limited to a certain number of houses I forget how many but 80 seems about right.

Generally:

Post codes are one street unless the road only has a couple of houses on.

Post codes in cul de sacs or very small quite roads will be any house

Most roads its different for each side (presumably so that when sorted by code and then house number the postie doesn't have to keep crossing the road after each house?)

+Mike Chipshop suggesting the houses are random is very bizarre (id actually suggest he's mistaken) many different ones may exist on a road if houses have been built been houses later on. Especially when blocks of flats have been put in mid way down the road as large flats may have individual post codes. But I find it doubtful only 8 out of 130 houses have the same - why/how would you even know the postcodes to everyone on your street?

There is more logic to them than you'd think, whereI used to live there was about 10 parallel roads built at the same time and all have very similar post codes - I know several people who live round the area and the only difference is the last character. Try typing in your post code into google and adjusting the last letter to see the next block. Obviously the system allows for inserting additionals roads so random ones are likely to not exist.

for example my current post code ends in N and is less than 20 years old... changing the last character for N-Z all the postcodes which exist are newer streets built after mine and all within half a mile.

why/how would you even know the postcodes to everyone on your street?

Ordering Pizza to my house online :p (I'm hungry and do it a lot from various different companies (Gogo, Hut, Dominos, Papa Johns etc).

Also when using Parcel Force worldwide for a pickup.

Ordering Pizza to my house online :p (I'm hungry and do it a lot from various different companies (Gogo, Hut, Dominos, Papa Johns etc).

Also when using Parcel Force worldwide for a pickup.

How would ordering pizza tell your all the post codes on your street? :s maybe im being dim but im confused - surely at best it would list all the houses with the same post code once you submit your post code.

Usually they ask for house number and post code - as that is all they need to find your house. I'm still baffled how you are 100% sure what your neighbours post codes is or even more so those who live down the street.

Well obviously i haven't been to all my neighbours and asked them (a few i know anyway and know they have different postcodes) but i have just double checked and there are 5 houses on my street with my postcode, i'd estimate between 130 -140 houses on the street.

If i go to order a pick up or pizza delivery via the internet, first i have to type in my postcode, next it gives me list of addresses that correspond to that postcode. On every site that it does this it always lists 5.

I live in the East end of London and the area was heavily bombed in the blitz... i'm thinking maybe my road was a different road or some major shuffle went on at some point.

(but to throw a spanner in the works further, my road wouldn't even have been in London during the war it would still have been part of Essex)

In UK to reach a particular house/place one must have only 2 things

1. House Number

2. Full Post code

Post code must have 2 parts

GU12 5BZ

In the first part GU12, the GU indicates the presence of major city here being Guildford and 12 indicates the zone. Which can be a nearby smaller town and not Guildford itself.

The second part 5BZ is simply the exact part of the street where the house is located in the GU zone.

So lets say for eg.

Name, Surname

150

GU12 5BZ

This data is completely sufficient for your mail to be delivered to you.

When I worked in Royal Mail, I came to know about these little bits as a part of the training :)

In the UK it works like that? My post code in spain covers the entire town (around 50k people). Here I think there is one code per post office.

Yeah, same in Australia. 3000 - 3999 is for areas inside of Victoria (a state), and then they just divide it all up and give each section a post code. The UK way seems incredibly complicated. :\

5 houses for a single postcode is perfectly reasonable - but you said every house was different and only 8 on the street were the same. If you meant at most 8 houses have the same that's pretty common.

Anyway to expand on sanke1 comments, after the first two letters corresponding to a major town in the example given GW, usually: GW1 would be the city centre of Guildford, with the next numbers creating a ring around the centre (eg. 2 is to the east, 3 is to the south etc. depending on the density this could be just 2 areas or 8 or more, and I believe it goes clock wise around the city not sure if there is a common start point). Then by that time the city itself is usually covered as well a satellite towns that merge with the city and the next "ring" will cover smaller towns. I'm --12 but 25 miles away from the city (and even in a different county!) to that referenced in the first two letters (it's my closest city still but that does not necessarily mean it has to be - its more a case of how post is delivered I believe, which is all post goes to a major city sorting office (GW), then to a local office (GW12), before getting delivered, there is no doubt sub sections to certain areas)

Yeah, same in Australia. 3000 - 3999 is for areas inside of Victoria (a state), and then they just divide it all up and give each section a post code. The UK way seems incredibly complicated. :\

Explain? I can't see how it's complicated - you get a post code area (the first two characters - e.g 'WD' is for Watford, 'BS' is for Bristol, and so on), then the remaining characters drill down into a district in the area, then a smaller area within that, and finally a street/section of dwellings/single dwelling depending on how the individual postcode is divided up.

Yeah our post codes are easy to understand. At least we use letters at the start to indicate which city area or county we are in unlike a lot of other places that just use numbers like the aussies and americans which just look like random numbers that tell us nothing without looking it up.

Yeah our post codes are easy to understand. At least we use letters at the start to indicate which city area or county we are in unlike a lot of other places that just use numbers like the aussies and americans which just look like random numbers that tell us nothing without looking it up.

So don't you guys include addresses when writing letters? Just a Post code? Addresses seem to help explain exactly where someone is. :s

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
    • For me, the fundamental problems with these "smartglasses" is that they really don't work well for people with significant prescriptions and massively up the price if you use attached lenses if they have displays, and if they don't, then they're not actually "smart" anything, rather just connecting to your phone and relaying voice to an AI. In a few cases like this, they throw in small cameras to feed video to the AI. All around, these feel like both a solution looking for a problem, and the problems it tries to solve seem more easily solved by different approaches and designs. Oddly, if the rumours are true, Apple may actually have invented something for once and it kind of does this right: put cameras in ear buds and manage the interface to AI exactly as most of us do: tapping on an ear bud and saying "Hey Google" or "Hey Siri." That makes them compatible with almost everyone, can double up as a hearing assist device, an impaired vision assist device, a "smart" device... and answer your phone and play music. That just seems like a better solution all around.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      84
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!