Driving Stick Behind Slow Drivers... Tips?


Recommended Posts

I just purchased my second car, a 2002 Mazda Protoge5 which has a manual transmission. My first car on the other hand was an automatic, so my experience with standard trans is very low at this point, so I'm looking for a few good tips.

So I'm still playing around with starting in first gear and getting a smooth acceleration, but for the most part I'm ok with it; the odd time however, I have rough start. Now, I've run into a few situations where I'm stopped at a red light with one car ahead of me, and when the light turns green, the driver ahead of me starts moving EXTREMELY slowly and keeping at an incredibly low speed with little to no acceleration, seriously, they only drive at about 10 km/h for a good 30 sec. Now, what I want to know is, what's the best way to drive stick in a situation like this without having the car jerk around a bit? The reason I ask is because I can't seem to get a smooth accel since I'm not able to give it too much gas. Any tips?

Stick = gears?

Rule of thumb is always pull away in first, then move to second and upwards as the ride demands.

In such a situation, I would generally go to second, but my car has a nice level or torque and can deal with it.

However, you can't get a smooth accelleration in first? Why?

One thing you can do, which is really dependent on how much torque your car has, is to start in 2nd gear. Another thing you can do, but isn't really good for your clutch, is to "slowly" let off the clutch until you feel it starting to slip, then give it a "little" bit of gas to keep it from stalling. Since you're starting out, I'd go to an empty parking lot or street and practice for a while (not good to stall in traffic). Once you get comfortable with the clutch, and knowing when it starts to grab (this will be different for every car), you'll be able to do this comfortably. Manual transmission cars can go slow too :)

Stick = gears?

Rule of thumb is always pull away in first, then move to second and upwards as the ride demands.

In such a situation, I would generally go to second, but my car has a nice level or torque and can deal with it.

However, you can't get a smooth accelleration in first? Why?

Well I can get a smooth acceleration when I'm starting at what I considder a normal speed. But when I'm going too slow, let's say while behind one of those slow drivers, it feels a bit rough.

One thing you can do, which is really dependent on how much torque your car has, is to start in 2nd gear. Another thing you can do, but isn't really good for your clutch, is to "slowly" let off the clutch until you feel it starting to slip, then give it a "little" bit of gas to keep it from stalling. Since you're starting out, I'd go to an empty parking lot or street and practice for a while (not good to stall in traffic). Once you get comfortable with the clutch, and knowing when it starts to grab (this will be different for every car), you'll be able to do this comfortably. Manual transmission cars can go slow too :)

Yeah I could go in second in situations like that but you sometimes don't know if the driver is a slow one or not, so usually I'm in first. Beyond that, and I don't know if this is good, bad or just the way my type of car is, but the clutch seems to need some good level of precision to get a smooth accel. Other standard cars I've driven have been a bit more... I don't know, forgiving. I guess maybe the "bite point" (as I've heard it's been called) is a bit bigger on the other cars I've driven. Mine, on the other hand, seems to have a smaller bite point, so I'm not used to it fully. A friend of mine took it for a spin when I first got it and mentioned that the clutch is sensitive, and even he made it jerk around a bit.

I dunno, maybe I just need a little more practice. Again, I'm okay for the most part, except when accelerating slower than I'm used to.

Like IceBreakerG said, torque plays a big role here. Civics produce barely any torque, so with my car it's possible to crawl very slowly on 1st gear. If you have something like a TDI with much more torque, just playing with the clutch (although slippage is bad) is more than enough to move in traffic.

Either you use and burn more the clutch, but stick closer to the car in front which I think is bad

or leave some space, burn less clutch, but have more people cutting you over because you're letting them in.

When im in situations like these, usually I tend to get angry, but being my 2nd year driving a stick everyday, I can tell you give them enough space and then go, as you get to 2500 shift to second and keep your foot close to the clutch.

The jerking your talking about happens in some cars because of the torque and in first you cant just give it gas and slowly let off, youll get rough / jerkiness. I learned that the 2nd day of driving my car and had to figure out what to do. Basically learn your car, its gonna become second nature too you. As soon as that happens your naturally know when to shift, when to put it in neutral and ride, when to keep a slow accelration / foot REALLY close to clutch, etc.

If I can make a video ill show you what I mean. Took me a while to figure it out, but the ONLY person i knwo that drives a stick and does what I did is an employee at my mechanics shop. He told me it was the easiest way to "crawl" in any stick. Only time you shift to second is depending on your car and how fast it reaches 2500 or shifting point.

Me, ive driven a few beamers/vws/mazdas etc. They all basically do good in first till you get to 2200 then if you shift to second, second handles everything in these cars.

DO NOT START IT IN SECOND or Slip it. Or plan on saving up money for a Clutch.

I think it has been well covered already, but the best solution in my book is to let some more room develop between you and the car ahead. The downside there is that you sometimes get a car to cut you off in between, but really so what. That costs you maybe 20 seconds in your travel time. If 20 seconds is worth the stress and the increased use of the clutch then ride that clutch and suck right up to that car in front of you.

I do look at clutches a bit different than most. The clutch is a wear item. It is designed to wear out and be replaced. You don't burn out a clutch anymore than you burn out your brakes. You can use both of those items up faster by abusing them though.

If you want to keep the clutch floored the whole time in traffic, I think that wears out the throwout bearing. You're better off just putting it in neutral if you think you won't be moving for a while.

Thank you for knowing what you're talking about. A lot of people argue that having it in neutral is hard on the transmission. I have no idea where this argument stems from, but it is nonsense.

With enough practice, you can drive stick at walking speed from a dead stop, without slipping the clutch, no matter how much horsepower or torque your car has.

No one can just tell you how to drive stick, you must practice and develop the coordination and pedal control.

Practice makes perfect.

+1 for the parking lot idea.

Thank you for knowing what you're talking about. A lot of people argue that having it in neutral is hard on the transmission. I have no idea where this argument stems from, but it is nonsense.

Yeah it's because those people mix up automatics with manuals. I forgot why it's bad on an automatic, but they probably assume that it's also stressful on a manual transmission.

Just don't let off the clutch all the way.

Once you get good at it, you'll never want to go back to an automatic. At least, I never do.

Yeah,

There you go. Ride the clutch all day!!

Might as well try and ride the brakes all day also, once you get it going!

Let's burn 'em all up!!

This is one time where practice does make perfect.

I'll never buy another automatic again, except for maybe a winter beater.

My first car, back in 1976 was a stick, and I've had (at least) one since. Currently have Ford Ranger and Jeep TJ that are sticks.

Love 'em!!

i've recently bought my first automatic..

won't be going back to manual if i can help it :D

i can see your point, manual can be a pain especially on up/downhill starts. you shouldn't have to ride or 'tease' the clutch if you are competent at driving manual, that's just silly.

As others have said, you just need to practice more... you'll get used to driving in any situation soon so that you don't even think about what gear you're in and just "do it" naturally. Find yourself an parking lot and just practice low speed driving such as this.

Pulling away slowly from traffic lights should be nothing more than lightly building the revs, letting the clutch out till it's fully engaged and just gently resting your foot on the throttle.. the car should almost pull itself along at the slowest speed without any throttle input from yourself and then as the slow mover up front gets their act together, just gently onto the throttle, build up the revs and into second and off you go :)

Once you get good at it, you'll never want to go back to an automatic. At least, I never do.

Try driving a flatbed truck with $30,000 worth of windows and other building materials on it, where you have to deal with hills that have red lights on top, and traffic.

You will change your tune real quick and learn to avoid certain places.

I learned to drive stick 18 years ago. It's been nearly 6 since I've driven stick and I don't miss it one bit. Though I did enjoy it.

i've recently bought my first automatic..

won't be going back to manual if i can help it :D

i know, after driving manual/stick for such a longass (10+yrs) time, especially in such congested roads such as the ones i have to deal with, i dont want a damn thing to do with it. automatic ftw. i went from driving a civic lx stick to a magnum rt auto.. im in heaven!

as for being behind some tourist, downshifting and mashing the gas worked well for me.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Good. I hope more people sue them for focusing on this worthless junk.
    • How about fire the guy who approved all the bad decisions? The guy who bought these studios in the first place? Oh wait, Satya is safe with his billions while the workers pay the price.
    • This had nothing to do with games. This is all about management wanting to squeeze as much money from Xbox to keep Microsoft's AI ambitions afloat. Someone has to make money to burn on AI.
    • GeekBook X16 Pro Intel Core Ultra 9 thin and light laptop gets a 17% discount by Steven Parker GEEKOM is back with a 17% discount on its top-of-the-range X16 Pro laptop. You may remember that we reviewed the X14 Pro back in February, which marked GEEKOM's debut into the ultrathin laptop segment. You can view the full specs below. GEEKOM X16 Pro Model NX14CM Dimensions 322.58 × 213.36 × 5.8 mm (12.7"L x 8.4"W x 0.23"T) Weight 997 g / 2.2 lbs Material Unibody Magnesium Alloy CPU Intel Ultra 5 125H (14C/18T, 24MB L3, 2.3-5.1 GHz, TDP 20W) Intel Ultra 9 185H (16C/22T, 24MB L3, 2.3-4.5 GHz, TDP 35W) Graphics Intel Arc graphics 8 Xe-cores @ 2350MHz 1024 shading units/stream processors (128 CUs), 8 Raytracing Cores, 64 texture mapping units, and 32 ROPs NPU Intel AI Boost, 11 TOPS / Up to 33 TOPS (CPU+NPU+GPU) Memory 32GB Dual-channel LPDDR5x 7467 MT/s Micron SODIMM Storage 1 x M.2 2280 PCIe Gen 4x4, Wodposit 1TB, 2 TB Display 16.0" IPS LCD, 2560 × 1600 (16:10) 100% sRGB, 120Hz Refresh Rate Camera 2MP 1080P 1 × Light sensor in camera module 1 × LED indicator in the camera module Windows Hello Support: No Mic 2 x Digital Mics integrated in the camera module Speakers 2 x 3813 (4Ω×2W) built in body Audio Codec: ALC269QN-VC3-GR Certificate: DTS: X Ultra Operating System Windows 11 Pro 25H2 Bluetooth Bluetooth 5.4 Wireless LAN MediaTek MT7922 M.2 Wi-Fi 6E LAN card Left I/O ports 1 x HDMI 2.0 2 x USB4 (40 Gbps) Right I/O ports 1 x USB 3.2 Gen 1 Type-A (5 Gbps) 1 x 3.5 mm Audio jack 1 x Camera Privacy Shutter Keyboard 78Key 1.2±0.2mm / Height 3.5±0.2mm (with backlight) White LED light in Caps Lock and Fn key Language: Default US Touch Pad Dimension: 120 x 71mm Material: Mylar Position: Middle Interface: I2C, Dualpoint button Dock Input port: 1 x Type-C 2 x USB 3.0, 1 x RJ45 1 x PD 1 x HDMI (Bio) Security Fingerprint sensor (in the power button) SD Card slot No Kensington Lock No Battery 77Wh (Input 20V, 3.25A) Power 65W PD GaN Fast Charge, USB-C to USB-C Warranty 2 years (Early Bird 1+1 Years) Deal price $1119.67 The X16 Pro is powered by the Intel Ultra 9 185H, which was released in Q4 2023 and is a 14th Gen Meteor Lake CPU designed for laptop/mobile using the Intel 4 architecture based on a 7nm process. The Ultra 9 185H features 16 cores and 22 threads running at up to 5.1 GHz. It also includes a dedicated NPU utilizing Intel AI Boost at 11 TOPS. On the graphics front, the 185H includes the still fairly capable ARC Graphics (not to be confused with the newer ARC 140T) integrated GPU with a max GPU frequency of 2350 MHz across 8 Xe-cores. It has been said that the iGPU is equivalent to the NVIDIA GeForce 3050 and GTX 1650 in gaming and synthetic benchmarks. Other highlights include an AMOLED display, LPDDR5x memory at 7467 MT/s, WiFi 6E, Bluetooth 5.4, and a fingerprint sensor built into the power button. AI PC? Although the Intel Core Ultra 9 185H includes a dedicated NPU, it's only 11 TOPS; therefore, it does not qualify as a Copilot+ PC. However, it can reach up to 33 TOPS with a combination of NPU, CPU, and GPU. As I said, although we only reviewed the X14 Pro, the unboxing is the same for the X16 Pro, which I noted in my review. The packaging is quite a nice experience. The outer box houses the X16 Pro box with a small compartment that contains the 5-in-1 Dock ($40 value), which appears to be an "Early Bird" inclusion. Upon removing the box cover, the X16 Pro is revealed sitting in a cardboard compartment with two small booklets of documentation. To the left of the X16 Pro are two cardboard compartments containing the 65W charger and Type-C USB cable. What’s In The Box 1 x GEEKOM X16 Pro Ultra-thin Laptop 1 x Type-C to Type-C cable 1.8M 1 x 65W GaN PD Fast Charger 1 x Warranty Card 1 x Thank You Card 1 x User Guide All products sold by GEEKOM receive a 3-year free Warranty from the date you receive the product. If needed, you can RMA or return locally relative to your region (the U.S. has a U.S. warehouse, mainland E.U. has a German warehouse). GEEKOM X16 Pro at GEEKOM U.S. for $1,119.67 was $1,349 (17% off) Use coupon code NWGBX1617 when checking out. This flash deal expires on July 2. Huge Summer Sale As a reminder, yesterday GEEKOM kicked off their Huge Summer Sale, in which there are deep discounts on a range of other GEEKOM products. From June 15 to June 30, the GEEKOM Official Store will be running its Summer Sale, with discounts starting from 15% off across the entire lineup, up to 50%! This is their biggest promotion of the year so far, offering pricing that is even lower than select Prime Day deals. You can check out the discounts at the dedicated Summer Sale landing pages below. GEEKOM U.S. Summer Sale GEEKOM U.K. Summer Sale While the Summer Sale ends on June 30, this deal will remain active until July 2.
    • We are reached to the point that apple looks affordable and better choice than anything else, in what dystopia are we living in....
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Steven P.
      89
    5. 5
      Nick H.
      71
  • Tell a friend

    Love Neowin? Tell a friend!