Recommended Posts

Well for one, its not really the same as net send. And you have the syntax wrong.. Its

MSG {username | sessionname | sessionid | @filename | *}

[/sERVER:servername] [/TIME:seconds] [/V] [/W] [message]

username Identifies the specified username.

sessionname The name of the session.

sessionid The ID of the session.

@filename Identifies a file containing a list of usernames,

sessionnames, and sessionids to send the message to.

* Send message to all sessions on specified server.

/SERVER:servername server to contact (default is current).

/TIME:seconds Time delay to wait for receiver to acknowledge msg.

/V Display information about actions being performed.

/W Wait for response from user, useful with /V.

message Message to send. If none specified, prompts for it

or reads from stdin.

So for example - from my one quad-w7 to other box p4-28g

msg adminstrator /server:p4-28g.local.lan test

post-14624-12677363813267_thumb.jpg

But just tested and you can put the /server before the username -- you might have a firewall blocking?

  • Like 11
Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592310642
Share on other sites

  On 05/03/2010 at 23:21, mzta cody said:

BudMan, I don't know if anyone else has said this, but I find your posts responding to various issues to be of a high quality. I almost always learn something reading them. Just wanted to say that.

Ditto, I enjoy them very much. Thanks BudMan!

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592316012
Share on other sites

I try and help as much as I can -- glad you guys are learning something!! If you like my posts -- make sure to vote them up.. The green + signs.. ;)

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592316538
Share on other sites

  • 3 months later...

I still can't get this to work. I am trying to send between XP and 7, when sending from XP it gets a access denied error. Vista and 7 say the user doesn't exist or is disconnected.

Yet I can sucessfully make each system send a msg to it's self.

All in the same workgroup.

perhaps you can't send between these OS's.

Anyone know whether this is possible?

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592800152
Share on other sites

Ok -- when I tested it was from win7 to a 2k8 box.. So this was allowed by default since AllowRemoteRPC is set to 1 in the reg..

So I tested and duplicated your problem -- but then set on both machines

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\AllowRemoteRPC to 1

So I have now tested with xp --> w7 and win7 to xp and both ways work.

post-14624-12773190977655.jpg

Now I am logged into each machine as bud with the same password - so there is no permissions issues..

So I tested by logging in with a different account, and got access denied. So looking into that.. Also seem to have issues sending msg to different account logged other machine when even logged into account that matches up with account on other machine that has admin rights. So clearly some issues between w7 and xp.. But again this msg tool is really designed for sending messages to true terminal server.. I have to do some real work ;) but will get back to it to see if there is a way to make it work.. But for sure your going to have to enable allowremoterpc with w7 and or xp.. Just need to figure out what other permissions are coming into play.. Seems unable to determine if user session is there, even when account that has admin right on other machine using passthrough.

Getting this error when try to send from bud account on xp that matches up with bud account on w7 with same password, but bud-w7 is logged into the win7 box.

bud-w7 does not exist or is disconnected

So you found something interesting to look into ;)

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592804292
Share on other sites

Ok -- figured out the issue I was seeing when trying to send to different users on the win7 box..

To xp from win7 works fine.

post-14624-12773266863119.jpg

As you can see bud-xp is logged into the xp box, and I sent him a message from the win7 box logged in as bud, and there is a bud account on the xp box with the same password to no permission issues. And by default admin shares are enabled on xp.

Now sending from xp to win 7, logged in as bud that matches up with an account on win 7 I was only able to send messages to bud, if he was logged in to the win7 box, if logged in with different account would get "user does not exist or is disconnected" error.

So I enabled admin shares on the win 7 box -- need to create this dword

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\LocalAccountTokenFilterPolicy and set to 1

This enables admin shares on win7, which are disabled out of the box.

Now I can send to a different account, ie bud-w7

post-14624-12773269650925.jpg

So for this to work in a non domain setup.. The account your using to send the message with has to have a matching admin account on the boxes your sending too, and looks like admin shares have to be enabled - which on win7 are disabled by default. And from before you also need the allowremoterpc setting.

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592804828
Share on other sites

Only vista box, which I just have not updated yet is my son's laptop who is no longer in the house - so would have to fire up a test box to verify.. But I would assume it would be the same, you would need to allow the do the allowremoterpc, and Im like 99% sure that vista also by default has the admin shares disabled - so will also need to do the LocalAccountTokenFilterPolicy -- if you have problems with it just let me know and will fire up a test of it.

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-592808474
Share on other sites

  • 1 year later...
  • 1 month later...
  • 2 years later...

Hi, ok I know this topic is old, but I'm trying everything on this thread and I'm seeing flames. I'm failing to send a message from XP to Win7, maybe what I need is a step by step guide. When I run "msg win7 /server:testxp testing xp" I get, Error opening Terminal server testxp
Error [1722]:The RPC server is unavailable. HELP!!!!

Link to comment
https://www.neowin.net/forum/topic/880618-using-msgexe/#findComment-596613217
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This super-powerful GaN charger with four ports is 50% off by Taras Buria Some time ago, I reviewed the Cuktech 10, a powerful 100W GaN charger with three ports. It left positive impressions, and since then, it has served me as my primary charger for my phone, watch, laptop, and tablet. Recently, Cuktech offered me the opportunity to take a look at the model 15, a more powerful 140W GaN charger, this time, with four ports. Right now, this powerful charger is available with a massive discount at just $50.99 (with coupon applied). The Cuktech 15 is the same as the Cuktech 10, just slightly bigger, more powerful, and with one extra port. It has a light metallic finish, but overall, it retains the brand's identity and features. The four ports are well spaced out, and the black plastic insert with a cyan rim has a ribbed texture for better grips. Although I live in Europe, Cuktech sent me a US variant with a retractable plug. Okay, I guess. The ability to retract the plug makes it extra portable, which is nice. A high-power 240W five-foot cable is also included. The charger measures 3.11 x 2.56 x 1.26 inches and weighs 0.737 lbs. The Cuktech 15 has four ports: two high-power Type-C ports, one Type-C port with a lower output, and one Type-A port. The first two Type-C ports can deliver a full 140W in single-port mode (PD 3.1 supported), which is nice—no asterisk or caveats here with combined power or something. If you need the full 140W for one device, you get it. Ports are capable of working in the following modes: Single-port Type-C1 / C2: 140W max 5V 2A, 5V 3A, 9V 3A, 11V 6.1A, 12V 3A, 15V 3A, 20V 5A, 28V 5A Type-C3: 33W max 5V 2A, 5V 2.4A, 9V 2A, 12V 1.5A, 11V 3A Type-A: 18W max 5V 2A, 5V 3A, 9V 2A, 12V 1.5A Multi-Port Type-C1 + C2: 100W + 33W or 65W + 65W Type-C1/C2 + Type-C3: 100W + 33W Type-C1/C2 + Type-A: 100W + 18W Type-C1 + Type-C2 + Type-C3: 65W + 60W + 7.5W or 45W + 45W + 18W Type-C1 + Type-C2 + Type-C3 + Type-A: 65W + 60W + 7.5W As you can see, the charger is pretty robust, and it can power two pretty powerful laptops at once and even have enough oomph to charge a smartphone, albeit at a lower power. Another thing worth mentioning is that the Cuktech 15 delivers "clean" power with pretty low pulsations at about 25-50 mV. The rule of thumb is that the lower the pulsations, the better the charger is for your device's battery health. In this area, Cuktech's charger does not disappoint, and they deliver way better results than 100 mV, which is considered a standard for a good charger. Cuktech uses gallium nitride technology, which enables smaller, more powerful and efficient charging. Speaking of efficiency, the charger is rated for 78% average or 64% at a 10% load. When charging at 120W, I received an average of 80-85%, which is good. Of course, when charging at peak power, it gets hot, but not too much. The Cuktech 15 140W usually costs $99.99, which is undoubtedly not cheap. However, right now, you can get it for half the price, which is a very good deal, considering you get a high-quality charger with plenty of ports and very high power output. Like with the Cuktech 10, you cannot go wrong with this one. CUKTECH 15 140W four-port GaN charger - $50.99 | 30% off + a 20% off coupon As an Amazon Associate, we earn from qualifying purchases.
    • Awesome book, just hope they don't screw up Rocky and the story
    • KDE's KClock is getting Wayland Picture-In-Picture support by David Uzondu The KClock app for KDE Plasma over the years has received a number of updates, like better integration with KRunner and a dedicated background service (kclockd) for managing alarms. Now, it looks like KDE devs want to add something cool: pop-out timers using the new Picture-in-Picture protocol for Wayland. Image: Kai Uwe Broulik This all started from a simple observation. Kai Uwe Broulik, a KDE developer, saw someone using a small timer window during a presentation and thought it was a good idea. The problem is that achieving this kind of "always on top" behavior is handled differently between the old X11 display server and the newer Wayland. With X11, an application could pretty much do whatever it wanted. If a program wanted to draw a drop-down menu, it would just create a borderless window, place it in a specific spot, and grab all user input. Wayland operates on a different philosophy. As Broulik notes, under Wayland, the application describes what it wants, and the compositor gets to decide how to handle it. A drop-down menu is an XDG Popup. The application tells the compositor which button spawned it, and the compositor handles the placement and behavior. This is much more secure and consistent. It also means an application cannot just decide to keep its window on top of everything else. This restriction prevents a web browser from implementing an overlay video player under Wayland. To get around this in a standardized way, a proper Wayland support model for Picture-in-Picture, or PiP, was needed. Enter the xx-pip-v1 protocol. It is a new protocol designed specifically for creating floating PiP windows, and KWin, Plasma's compositor, recently gained support for it. Because it is an experimental protocol, its use is gated behind an environment variable, KWIN_WAYLAND_SUPPORT_XX_PIP_V1. A new protocol is fine for demos, but it needs a real application to find its weaknesses. So Broulik implemented it in KClock. This work allows KClock to offer pop-out timers and even a pop-out stopwatch in a small PiP window. The user could get system-wide options to control where the PiP window appears, or if it appears at all, and have that setting apply to every single application that uses the protocol. You can check out the merge request on GitLab for more technical details about this feature.
    • Nothing of course; it is just a classic syndrome of MAGA pathology.
    • They use it to assessment's in the UK already. Have a friend who said they basically feed response's and prompt during assessment's for many mental health conditions now (essentially tick boxes these days enough ticks and you got it) the AI can prompt questions to ask if its unsure how to score something. It's really good at recognising fractures and broken bones also.
  • Recent Achievements

    • One Month Later
      CHUNWEI earned a badge
      One Month Later
    • Week One Done
      TIGOSS earned a badge
      Week One Done
    • First Post
      henryj earned a badge
      First Post
    • First Post
      CarolynHelen earned a badge
      First Post
    • Reacting Well
      henryj earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      477
    2. 2
      +FloatingFatMan
      196
    3. 3
      ATLien_0
      164
    4. 4
      Xenon
      81
    5. 5
      Som
      77
  • Tell a friend

    Love Neowin? Tell a friend!