• 0

Need advice on what Anti-spyware software to use.


Question

I know there are a thousand similar topics to this. But I think I need to explain my specific dilemma.

I've been out of touch for a few years. The last time I trolled here and looked at what was a good and powerful combination of programs to use to protect my PC , I was using AVG Free anti-syware (for Anti-virus), Ad-aware (for anti-spyware), combined with Spy-bot Search and Destroy.

At the time, that was the best thing to do.. to run Ad-aware SE edition with Spybot. The two worked well together, What one missed, the other caught, etc.

I then switched out my anti-virus to Nod32, and added a 3rd anti-spyware to the mix (Windows Defender).

So this is pretty much what I had been using.

Now, I'm still using:

-Nod32 (for Anti-Virus)

-Spybot Search and Destroy (as one of my Anti-spyware).

-Windows Defender (Build in to windows - I'm still on Windows Xp).

But for the longest now my Ad-aware SE has stopped updating (too old). And I've been trying to decide what to replace it with.

It has got me re-evaluating thing, such as if I even need to still be using some of the application in my list above.

I've heard good things (from this site), for Windows Security Essentials. But as I use Nod32. I am not sure if I should have both on at the same time.

But if I keep Nod32.. what should I do for Anti-spyware? I don't think Spybot Search and destroy on it's own, is enough. At least it wasn't so in the past.

And if I do need to add something, what should I now be using?

I'd appreciate any help you guys can provide.

Thanks,

Zanatar.

Recommended Posts

  • 0

Just get Microsoft Security Essentials (MSE). It's free and works great and you don't have to take my word for it. :) I'm sure lots of people will come in and say the samething after me (or before me incase they hit the submit button before me :D )

  • 0

The problem is Nod 32. I still use it. Unless it is recommended that I stop using it and switch to MSE? Should I stop using it? Or can both be used at the same time?

It comes down to this (And tell me if this is an accurate statement or not).

It sounds like I have 2 choices:

1) Un-install Spy-bot, and Nod32. Install MSE. And from what i've read and heard. MSE replaces all and is a 1 shot protection to everything. Is this true? Is MSE everything in one? Best Anti-Virus, Best Anti-spyware, and all that stuff? DOes it catch all the Spyware and malwares etc? You know longer need multiple coverage of different programs to catch it all ? (ie: Like I used to have to do , with Ad-aware and Spybot S&D) ?

2) Keep using Nod32, and Spybot . And if so.. what else should I use for Anti-spyware? Is Spybot S&D good enough now, that I don't need to replace my outdated version of Ad-aware?

Thanks,

Zanatar

  • 0

MSE does replace everything except Common Sense 2.0. No Malware product (not even 2 of them) combined will catch 100% of stuff. You are likely to catch a higher percentage of malware when you have more products scanning for that but they just inherently slow down the PC. MSE is light on resources and catches basically everything, what it misses, consider it lesson learned. Anyways, with CS 2.0 you should be getting infected at all :)

(sorry, bad jokes in there... )

  • 0

Panda Cloud AV, Avast or if your ISP has one for free is what I would go with.

MSE does replace everything except Common Sense 2.0. No Malware product (not even 2 of them) combined will catch 100% of stuff. You are likely to catch a higher percentage of malware when you have more products scanning for that but they just inherently slow down the PC. MSE is light on resources and catches basically everything, what it misses, consider it lesson learned. Anyways, with CS 2.0 you should be getting infected at all :)

(sorry, bad jokes in there... )

That is very crappy advise. CS 2.0. A great way to secure your system.

  • 0

Well I'm with Bell DSL as my ISP.

Ok, so I get it, that MSE replaces all the rest. But Nod32 did get the 2nd highest votes after MSE (in a poll here on this site.) So NOD32 seems to still be well respected and liked..

So if I were to keep Nod32.. what would you then advise me to use for Anti-spyware? Is Spybot enough on it's own now days? Do should I still run something else with it.. again This is just if I opted to continuing using NOD32.. Since I do really much like my Nod 32.

But again NOd32 is only Anti-virus .

Once I know what you'd suggest if I were to hold on to Nod32. , I can then choose between the 2 overall options to either 1) ditch Nod32 and Spybot S&D and replace it all with MSE vs keep using Nod32 with whatever you'll be recommending.

Thanks, Zanatar.

  • 0

nod32 has it's pluses but from what i have seen it has missed alot wheras others have found more like malwarebytes and superantispyware but it would be either mse or panda cloud as both are free but mse has a habit of hogging cpu usage on some systems wheras panda cloud seems to be better but sometimes it seems to take extra time to load from what i have seen.

  • 0

Only Nod32 is enough as it has Anti-spyware with it (Most of the AV software these days have it). You can disable Windows Defender as you will never need it.

You can got to Nod32 website to check.

I thought MSE disables Windows Defender by default?

I personally use NOD32 and Malwarebytes AntiMalware.

  • 0

I believe it does disable it by default as to my understanding MSE does everything and more to what defender does.

MSE = Windows Defender + anti-virus + easy to use UI.

As mentioned above: MSE + Common Sense 2.0 is all you need.

  • 0

Ok well I've decided to go with MSE and just MSE.. I've removed everything else. Thank you for the advice.

On a similar note, and I don't think it warrants another post.

With MSE.. It actually detected 3 items that nod32 never did (I'm actually surprised at that). It automatically quarantined the three of them.

I have a question that I've always been meaning to ask and just never have.. When any Anti virus program quarantines a file due to an infection, it is still on your PC right? It is neither cleaned nor deleted. So what exactly does quarantining it do?

Do I need to remove those 3 quarantined files after? Or is it safe to just leave it as is now that they are quarantined. I've never known what to do with a quarantined file in the past.

Thanks, Zanatar.

  • 0

Ok well I've decided to go with MSE and just MSE.. I've removed everything else. Thank you for the advice.

On a similar note, and I don't think it warrants another post.

With MSE.. It actually detected 3 items that nod32 never did (I'm actually surprised at that). It automatically quarantined the three of them.

I have a question that I've always been meaning to ask and just never have.. When any Anti virus program quarantines a file due to an infection, it is still on your PC right? It is neither cleaned nor deleted. So what exactly does quarantining it do?

Do I need to remove those 3 quarantined files after? Or is it safe to just leave it as is now that they are quarantined. I've never known what to do with a quarantined file in the past.

Thanks, Zanatar.

When it quarantines a file "It means that the extension of the file is changed, it may be encoded to prevent it being executed, and the file may be changed to disguise it against other malicious software."

as far as MSE finding 3 things Nod32 missed, well I think you've finally come to the realization that no AV is perfect. No antivirus will protect you from 100% of everything bad on the internet. That's where Common Sense 2.0 comes in handy :)

  • 0

It let a virus through about 5 hours ago on my machine, so I say it blows.

Well if you installed another piece of software (Kapersky, NOD32, Avast, etc) and that's how you found out then you consider yourself reminded that none of the AV software out there is 100% fool proof. Whatever you are using now, some stuff will and has slipped by that one too.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      582
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!