Recommended Posts

Hey,

I have a GTX 295 graphics card, and after reading about the latest troubles with drivers i rolled back my drivers. last night while i was just surfing and listening to music, my windows 7 changed to the basic theme.

I quickly loaded up GPU-Z and found that my GPU temperature was just over 90, and i didnt like the sound of that so i just shut the computer down and went to bed :D

So ive just got up, start the computer and its idle temp is just under 70. so i went and downloaded the latest drivers from the nvidia website (196.21) and ive installed them.

GPU-Z is still showing a temp of just under 70, is this a high temp? coz it sounds like it to me :(

I've included a screen shot of GPU-Z just incase im looking at the wrong temp :D

post-294940-12679697590799_thumb.gif

should i be worried? does anyone know the normal temps for a GTX 295?

I need to put my heart at ease, as i paid a fair bit for the card, and dont really want it to die :D

Thanks in advance

Link to comment
https://www.neowin.net/forum/topic/881454-gtx-295-idle-temp/
Share on other sites

What GTX 295 cooler do you have the new or old?

On one of the GTX 295 GPU's I'm getting 61C the other 56C at idle and I have seen it go over 90C at load nothing I can really do about that mainly because of me case and how the new GTX 295 cooler is by blowing one GPU's heat into the case.

So what case do you have? Maybe get some more fans?

What GTX 295 cooler do you have the new or old?

On one of the GTX 295 GPU's I'm getting 61C the other 56C at idle and I have seen it go over 90C at load nothing I can really do about that mainly because of me case and how the new GTX 295 cooler is by blowing one GPU's heat into the case.

So what case do you have? Maybe get some more fans?

Thanks for the reply,

I have no idea what cooler i have, its the one that came with it :D I bought it 02/06/09 if that helps.

as for the case, i have an Antec 900, so ive got quite a few case fans. I was thinking about getting another fan for the side of the case, as there is a hole there waiting for one, and its right next to the GPU. im not sure it will help tho, as my CPU isnt feeling the burn, and idles around 40.

I tried turning the fan speed up on the gpu and that seemed to bring the temp down quite a bit, but i did turn it up to 100%

The whole thing makes a fair bit of noise with all the fans, but its a really noticeable noise when i turn the gpu fan up.

should i turn it up in order to stop it from dying?

Thanks in advance

seems pretty high. not sure if this helps, but try the newest version 0.3.9 as it's much more accurate than previous versions.

Thanks for the reply,

Just downloaded the lastest version and its giving me the exact same reading :(

EDIT:

Just noticed on a different screen, it says that the 70 is the temp reading from the driver, but the 62 is from some ADT4743 sensor chip.

post-294940-1267993788449_thumb.gifpost-294940-12679938961713_thumb.gif

I don't know what can be considered a high temperature really.

With my EVGA Geforce 260 SSC, I can hit 90-100 degrees in OCCT graphics benchmark without artefacts, but if it ever hits 70 while I play World of Warcraft it can start to artefact and then eventually crash the display driver. Quite annoying anyway, have to always remember ramp the fan speed to 80% everytime I play WoW to prevent it.

Anyway from your newer screenshot, your fan speed is 40%, I'm thinking this is the speed from Automatic fan control. If you use EVGA then grab their precision app and ramp it to 60%, which imo, is still somewhat quiet :)

edit: just ran my card idle for 5mins at 40% and temps are at 45 or so, probably some very bad airflow in your case, make sure at least 1 of the fans are on exhaust. Some cases come with 2 fans that do intake only(!) and as a result trap all the heat, try the tissue test to see which way they blow :)

I know you said you have the 196.21 drivers but just make sure your GPU fan is spinning. There was just a recall of the 196.75 drivers because fans weren't starting and this was causing overheating. http://news.cnet.com/8301-17938_105-10464475-1.html

You've got the Antec 900... do you have all the case fans turned up to their highest speeds?

Also, check out this post: http://www.eggxpert.com/forums/thread/518908.aspx Basically, top + rear fans will cool your system the most, but top + front cool fastest. You might see if your case has positive air pressure.

Definitely seems a tad high. I have always owned Nvidia cards over the years and my current card right now, a GTX 285, is the highest idle temp I have ever seen on a Nvidia card that I have owned, and that is 45. It only goes to about 60 when I play games and stuff, so yeah, that seems high, as I am just using stock cooling as well.

Hmmm just downloaded GPU Z, and it says my Idle temp is 50, while RivaTuner said it was 45. Hmmm.

temps.PNG

PCB temeperature in GPUZ is GPU ambient temperature in everest... and opt3 sensor is aprox room temerature. This is all on idle with default cooler, zotac GTX295 single PCB. On Load i never saw it over 77 degrees (and it was overclocked runing OCCT GPU stress test). So ye 70 idle seems high for me, but its also true chips are made to survive 105... but i wouldnt push it that far :)

Definitely seems a tad high. I have always owned Nvidia cards over the years and my current card right now, a GTX 285, is the highest idle temp I have ever seen on a Nvidia card that I have owned, and that is 45. It only goes to about 60 when I play games and stuff, so yeah, that seems high, as I am just using stock cooling as well.

Hmmm just downloaded GPU Z, and it says my Idle temp is 50, while RivaTuner said it was 45. Hmmm.

GPU-Z is pretty accurate and constantly updated. You could try nvidia system tools.

The two PCB version of the GTX295 with the old cooler gets hot. Very hot. The temps you have are about right. Mine used to regularly get to about ~65-70 idle and over 100 max'd (OCCT) before adding some extra side cooling for both intake and exhaust. Now I'm ~45-55 idle and 75-80 max'd (OCCT).

If you look at the top of the card (the side with the two power connectors) you will notice that part of the rear exhaust is going back into the case. If your case can do so, add an side fan above that to help exhaust this excess heat out of the case.

Also, the position of the cards intake fan is a little difficult to get cool air to. If you have a few harddrives in your case, then the front fan will just be blowing warm air into the rest of the PC, unless you have multiple front fans as seen on some cases. Even so, there is never any direct airflow to or over the cards fan. I'm still in the processes of sourcing a case that would adequately cool my GTX295, but in the mean time I'm going to do a simple case mod on the side window to add an extra intake fan. However, even with just the one exhaust fan it does reduce the temps quite a bit.

I'm also using the 196.75 drivers without issue. Same temps as with the 196.21 and no change to fan speed.

post-1648-12681209879588_thumb.gif

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      578
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!