Got a PS3. Now just have a few questions!


Recommended Posts

Got me a PS3 on Saturday. I've owned 2 xboxes in my time but never made the Sony leap.

I just have a few questions about my new console.

I got it with Littlebigplanet, Assassins Creed 2, Ghostbusters and Bioshock 2.

My first reaction when trying to play them, after coming from an xbox, was just how long it took before I could play them. They have to install, there is no optional install it seems to be mandatory on some games so that's a 10 minute wait before I can even start up. Not a big problem I guess, but I plan on renting my games and my poor 40gb HD is going to take a beating.

But perhaps my most important issue is framerate. Unless my Ps3 is faulty but I seem to be getting lots of framerate issues. In bioshock 2, I feel like the PS3 is just struggling to run it. Ghostbusters is where I really notice it though. It just seems to be straining most of the time and its noticeable. In fact my PC runs both those games alot faster.

Assassins Creed 2 is better, but when I bring up the map there is a noticeable lag.

I guess what I'm asking is, is this performance normal? Or have I got a defective unit?

I think to be blunt, the PS3 is too complex for most developers so they focus their attention on the Xbox 360 (and PC) versions.

So try going for exclusive or first-party titles, otherwise you will see some jerky frame rates and stuff.

Ghostbusters was certainly one of the sloppy ports that hit the PS3 lower resolution etc etc got a total slating. Not heard anything about Bioshock 2 though so that surprises me.

As mentioned try picking up some exclusives if you really want to see what the machine can do. Although there really is little reason for sloppy ports anyways.

A lot of cross platform titles have an install on the hard disk for the PS3.

Its fairly rare for First party titles to have an install, those that do have a small install footprint. Final Fantasy 13 is another good example of game that does not install, but has quick load times.

I guess it all comes down to the developer.

Basically it comes down to what others have said so far, poorly optimized ports.

Uncharted 2 for example, which is a PS3 exclusive, runs beautifully for me all of the time and is a very enjoyable game.

Assassins Creed 2 runs exactly the same on the PS3 as it does on the 360 - the map 'lags' in both.

Bioshock 2 runs perfectly fine on my PS3, same as on the 360.

This was my understanding as well, that both of these games ran fine.

Honestly I have not really heard about frame rate being a widespread issue on PS3 games in a good 6 months.

Also to the OP, check in Bioshock 2 menu settings, there is something about locking the frame rate in and not locking it in, and see if that helps performance with it at all.

Ghostbusters now that is another story, that is a well publicized travesty on the PS3.

They need to install because Blu-Ray is slow read compared to DVD.

It's not hideously slow. At 2x speed (the PS3) Blu-ray is read constantly at 9MBps. At 12x speed (the 360) DVD averages 11MBps with a single layer and 8MBps with a dual layer.

It's not hideously slow. At 2x speed (the PS3) Blu-ray is read constantly at 9MBps. At 12x speed (the 360) DVD averages 11MBps with a single layer and 8MBps with a dual layer.

Good of you to point that out. Most people just see the #x and assume that number alone tells the whole story.

Thanks for the info. I thought I was going mad. I guess ill try to swap in Ghostbusters for another title. Even if the framerate issue wasn't there, I find the game too boring to be honest.

Apart from Uncharted 2, can anyone recommend any other really good titles exclusive to PS3?

PS3 has many excellent exclusives, there's more to it than just Uncharted or MGS4 (which 9 out of 10 people you ask here will answer with :p). "Really good" is subjective so yea...

Valkyria Chronicles

MLB 10

Disgaea 3

Demon's Souls

God of War Collection/3

Heavy Rain

Killzone 2

Ninja Gaiden 2

InFamous

Rachet and Clank

White Knight Chronicles

LBP

Yakuza 3

MAG

These are just off the top of my head, there are plenty more I'm sure.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.7 fixes: Fixed an issue that prevented users from creating meetings without an active license Download: AnyDesk 9.7.7 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      524
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!