1 red light


Recommended Posts

Hi, I know the 3 red lights is an all too common problem with 360s but what about 1 red light? My 360 isn't under warranty any more so i was wanting to repair it myself.

Does anyone have a guide for repairing a 360 with 1 red light (E73)?

http://www.youtube.com/results?search_query=E73&aq=f

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592471610
Share on other sites

I can't pass up posting this slightly edited picture, especially with that name of yours;

RRoD.jpg

Hahaha! I love it!!

@Sikh, the xbox is about 2 years old, with minimal usage. I've tried without the hard drive, to no avail.

@mokthraka, those all seem to be temporary fixes. Are there any more permanent fixes?

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592473234
Share on other sites

Hahaha! I love it!!

@Sikh, the xbox is about 2 years old, with minimal usage. I've tried without the hard drive, to no avail.

@mokthraka, those all seem to be temporary fixes. Are there any more permanent fixes?

Send it into to Microsoft Support, if you're out of warranty, buy a new Xbox 360, because you're SoL. Buy an Arcade unit and just move your hard drive and accessories over.

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592473290
Share on other sites

Actually, what my brother did to get his Xbox repaired for free was to try and fry some of the internal stuff to get the "Red Ring of Death", so he wrapped it up in things and kept it very hot, going from an E74(?) error to the holy grail and free repair of an RRoD error.

There always is that path.?? :shifty:

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592473312
Share on other sites

Actually, what my brother did to get his Xbox repaired for free was to try and fry some of the internal stuff to get the "Red Ring of Death", so he wrapped it up in things and kept it very hot, going from an E74(?) error to the holy grail and free repair of an RRoD error.

There always is that path.?? :shifty:

Er, you know E74 is covered by 3 years now as well! Didn't need to do the towel trick.

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592476860
Share on other sites

Actually, what my brother did to get his Xbox repaired for free was to try and fry some of the internal stuff to get the "Red Ring of Death", so he wrapped it up in things and kept it very hot, going from an E74(?) error to the holy grail and free repair of an RRoD error.

There always is that path.?? :shifty:

Sorry but that is the dumbest "resolution" that only just further screws up your Xbox. You'll render it even more useless by frying other components that do NOT need to be heated. What the towel trick is "doing" is a ghetto GHETTO way of trying to solder it to have things "resink." What you just need to do heat up everywhere around the GPU/ANA chip and what connects to it. NOT the entire thing.

The best bet is to repair it yourself. @Mistical has been able to fix a bunch of Xbox's with 3RRoD and a bunch with E74/3 errors. I'll have him post in here for recommendations if you're NOT covered by Microsoft's warranty.

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592480810
Share on other sites

You should of done some more research before you came to the conclusion of thinking the towel trick is the way to go. The towel trick is not going to resolve anything and very, very likely to damage hardware inside.

The better self fix it to take apart the 360, if you even know what you are doing or find someone who may know. I have done this many times to extra 360's of mine and friends with great results and usually do not have to do it again for a few months or not again.

The heatgun fix works great. Basically you take apart your 360, after warranty, and disconnect everything and take the motherboard out. Apply heat to the general area of the CPU, GPU and HANA chip. You can but do not have to, wrap areas you will not be applying heat to with aluminum foil. Do not directly apply heat, nor have it too close to the motherboard and do not stay in one particular area too long.

This also gives you a chance to clean out the 360, the fans and maybe even add additional fans for a small price to the CPU/GPU and replace the back fans. The fans are optional and up to you, though I do recommend it. You would also need thermal compound (the best will be artic silver) to put back on the CPU/GPU after you have cleaned them off and before you put the heat sinks back on and the 360 back together.

This is just short version of what you have to do, you can research the proper ways/steps to doing this if you wish. I just will not waste my time writing one out myself if it won't be used. :)

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592504942
Share on other sites

Why the hell would you do a towel trick? You're an idiot if you keep doing that and think it actually resolves something.

Why don't you "towel trick" your computer and let me know how that goes.

Actually, before you go calling people an idiot, why don't you probe a little further?

The only reason I did the towel trick was a short-term fix until I can afford to get it replaced, idiot.

@mistical, thanks for a more thoughtful reply. I might try this before I go out an buy a new one

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592505334
Share on other sites

Actually, before you go calling people an idiot, why don't you probe a little further?

The only reason I did the towel trick was a short-term fix until I can afford to get it replaced, idiot.

@mistical, thanks for a more thoughtful reply. I might try this before I go out an buy a new one

Why would I need to probe further to prove that doing the towel trick on an Xbox 360 is the most idiotic suggestion you could follow?

Like I said, when you need to fix your computer when something happens, do the towel trick on it and let's see what happens. Mkay?

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592505340
Share on other sites

Why would I need to probe further to prove that doing the towel trick on an Xbox 360 is the most idiotic suggestion you could follow?

Like I said, when you need to fix your computer when something happens, do the towel trick on it and let's see what happens. Mkay?

Well it's working so it can't be that idiotic as a short term fix. Obviously it reset something to make it usable again.

Also why the hell would i towel trick my computer? Completely different machines. M'kay.

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592505510
Share on other sites

Well it's working so it can't be that idiotic as a short term fix. Obviously it reset something to make it usable again.

Also why the hell would i towel trick my computer? Completely different machines. M'kay.

It depends what you think of short term, because do not expect it to last long at all. I do not think you should do the towel trick again. Use my suggestion and research more on it when it comes to that. Because it will again, very soon, or you can fork up money to buy newer, better revisions of the 360 (August 2009+).

The heat gun fix is the proper way (among my other suggestions) then the towel trick. It solders it properly and faster. Also the 360 getting cleaned is always for the best as I am sure it is very dirty inside as thats another problem with how they were made, not enough of good ventilation and its heat sink design. The towel trick, as I said, will likely easily damage the system and possibly even worse as it is not safe wrapping up a console and forcing it to overheat.

Link to comment
https://www.neowin.net/forum/topic/891618-1-red-light/#findComment-592505546
Share on other sites

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You're absolutely right! No reason in hell these should be on the road!
    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      76
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!