Recommended Posts

have u ever run chrome 5?Opera 10.5+? Probably no

I can definitely say that Firefox 3.6.6 leaks like a Halal tortuered cow in Mac OS X. I didn't check 4.0b1 -- it was too ugly so I reverted to pretty GrApple. Chrome, Opera and Safari are all far superior in terms of memory management (in OS X), to be honest. That said, Firefox on OS X is a completely different experience than on Windows. I wouldn't go anywhere close to FF[4] on Windows, but yet it's my browser of choice in OS X.

Makes me wonder what they have planned for us. I hope they make an effort to give it a Cocoa feel so I don't have to rely on someone updating themes... Wouldn't hurt to have the OOPP bug fixed either.

Well, which is the best script for making the button go into the tab bar?

And can anyone change the color of the button so it resembles Word 2010?

Blue button

@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);

#appmenu-button-container{
margin: 0px 0px 4px 4px !important;
}

#appmenu-button{
padding: 3px 10px 3px 9px !important;
}

#appmenu-button dropmarker:before {
padding-right: 5px !important;
}

#appmenu-button{
background: -moz-linear-gradient(top, rgba(40,95,178,1), rgba(78,147,229,1)) !important;
-moz-border-radius: 0px 0px 4px 4px !important;
border-top: 0px !important;
margin-top: 1px !important;
}

#appmenu-button:hover{
background: -moz-linear-gradient(top, rgba(40,95,178,.9), rgba(78,147,229,.9)) !important;
}

Tabs in titlebar

@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);

#appmenu-button-container{
position: fixed !important;
}

#navigator-toolbox[tabsontop="true"] #TabsToolbar{
padding-left: 95px !important;
}

#appmenu-button .button-text { display:none !important; }
#appmenu-button dropmarker:before { content: "Firefox" !important; }

#appmenu-button{
padding: 1px 10px 3px 9px !important;
height: 22px !important;
}
#navigator-toolbox[tabsontop="true"] #TabsToolbar{
padding-left: 90px !important;
padding-top:3px !important;
}

Found a bug if you move the tabs in titlebar popup windows end up getting screwed up.

What code would I need to mod to tell stylish to push the address bar down (Using padding or whatever) only for pop up windows?

2jbjmzm.png

also Appmenu button if you change the color of it you MUST also change the color in #appmenu-button[open=true] or it does not behave like default set color:

#appmenu-button[open="true"]{
    background: -moz-linear-gradient(top, rgba(40,95,178,1), rgba(78,147,229,1)) !important;
}

Example color I used was the blue one Darrian just posted. As you can see you just enter the same color values as #appmenu-button. Very simple fix.

Thanks that works. DTA still doesn't work, not even the beta :( I saw someone post somewhere that there was a dev version of dta that was compatible but I can't find it at all.

And is there a stylish code to move the tab bar down? I am using the clearscreen sharp theme and the tab bar is inside my windows buttons:

post-159052-1278777258862.png

And is there a stylish code to move the tab bar down? I am using the clearscreen sharp theme and the tab bar is inside my windows buttons:

post-159052-1278777258862.png

#navigator-toolbox[tabsontop="true"] #TabsToolbar{
padding-top:4px !important;
}

4px works for default aero

Thanks that works. DTA still doesn't work, not even the beta :( I saw someone post somewhere that there was a dev version of dta that was compatible but I can't find it at all.

http://code.downthem.../nightly/trunk/

How did you get the reload and home button next to the button?

How did you remove the "favorites" icon from the adress bar?

Reload and home, I moved then. Then used a couple of stylish code's to move the button to fit next to them.

As for the favourites icon?

Bookmark icon. The one that opens a drop down menu. I want to remove it.

I can't move the buttons.

when you have the bookmarks toolbar on the button next to search moves down and acts as the other bookmarks folder in the toolbar

Removing the Bookmark menu is actually VERY simple as I found out.

First turn on the bookmark toolbar so the button menu vanishes. Then clear the toolbar of any bookmarks and simply move it next to the menubar which is hidden anyway thanks to the new Menu Button.

Darrian your blue button and tabs in title bar scripts work great however when I close Firefox and re-open it I have to disable then re-enable each script for it to work again. Any ideas why this is the case? It could be a problem with my Stylish version or something else.

Also, that new add-on manager looks great but it would be nice to make each add-on box a bit smaller.

Thanks

Don't really care as much about interface, but I do care about,

1. Retained Layers

2. Fixing newly introduced and old D2D Issues

3. moz fv method+tracing JIT

You should be expecting crashes, memory leaks, high memory usage, rendering errors and GUI bugs.

why? they have been there since firefox 3 you would think **** would be fixxed by now way to much ram is being used in every version of firefox

...

way to much ram is being used in every version of firefox

Firefox on average uses less memory than Chrome/IE/Safari/Opera. That might have changed though, the others might have caught up.

Of course you have to remember that measuring the worth of a browser by how much memory it takes up is silly. I'm on a 4GB system, Firefox could use 1GB of RAM and I'd still have nearly 3/4ths of my RAM unused.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nobody is buying a PS5 only for playing Until Dawn 2. Their loss.
    • If you actually used it instead of responding like a petulant child you might be surprised. I switched from Google some time ago and have been very satisfied.
    • I am one of the first people to use the DXVK technology. In the channel below you can see some videos that I have made using this technology, including Assassin's Creed Odyssey. https://www.youtube.com/@nahum7995/videos Assassin's Creed Odyssey experienced several bugs and technical issues during its first months after release. It launched with its own fair share of funny but frustrating glitches. I ran it on DXVK 9 days after its release and I played it for many hours but didn't see a single significant bug on Linux. Assassin's Creed Odyssey is widely celebrated for pushing the franchise in bold new directions and specifically for nailing several elements better than any other title in the AC series: Player Choice & Branching Narrative, The Mercenary & Cultist System, Mythological Integration, Overpowered Combat Abilities, Open World Exploration But what I'm trying to point out is that this game wasn't quite playable on most windows systems, until a few months after its release when most of the bugs were fixed. However, on Linux it ran completely flawless from day one, although DXVK had seen little development and refinement at the time. What do you think the situation will be in 2026 now that most bugs and glitches of DXVK have been completely eliminated? This is information from Google about these situations that I am quoting. In many cases, using DXVK (a translation layer that converts DirectX 9, 10, or 11 into Vulkan) can result in more stable frame times and higher performance than native Windows rendering. This happens primarily by bypassing driver overhead and multithreading draw calls that were previously restricted to a single CPU core. Older APIs (like DirectX 9 and 11) are largely single-threaded on the CPU side. DXVK translates these calls to Vulkan, which is highly multi-threaded. This reduces CPU-bound stuttering on weaker processors. In certain cases, GPU manufacturers (especially AMD) have significantly better and more modern Vulkan drivers than they do for legacy DirectX. Vulkan gives developers—and in this case, the translation layer—closer control over how resources are held in VRAM. This can prevent micro-stutters and sudden frame drops during chaotic gameplay. Yes, certain games, particularly older DirectX 9 to 11 titles, can run with fewer crashes on DXVK than on native Windows. By intercepting DirectX draw calls and translating them into the modern, highly efficient Vulkan API, DXVK bypasses the limitations and poor driver support that cause instability in aging game engines. PlayStation 1, PlayStation 2 and PlayStation 3 can be easily and perfectly emulated on Linux. In fact, modern Linux emulators offer high-performance upscaling, widescreen patches, and automatic controller mapping out of the box.                                                                                                                                                                                                                                                                                                                                 PlayStation 1/2/3 games look drastically better on Linux thanks to resolution upscaling. Furthermore, it is also a fact that you cannot play many fun games on Windows either, isn't it? - The Nintendo Switch has an extensive library of exclusive games. - PlayStation has an extensive library of exclusive games - Android has "mobile-exclusive" games, meaning they are exclusive to mobile devices (iOS and Android) and aren't available on PC or consoles. And finally, it is also the case that in the next five years there will be games that millions of people will say you absolutely must play and that they want to play this specific game that released a few days ago. However, the other side of this story is that currently, absolutely no one cares that they cannot play these upcoming games right now.
    • Flameshot 14.0 RC3 by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 RC3 changelog: Translations update from Hosted Weblate by @weblate in #4612 Translations update from Hosted Weblate by @weblate in #4619 Fix pin position on Windows for scaled screen by @ElTh0r0 in #4614 Cmake Analyzers by @ElTh0r0 in #4613 Translations update from Hosted Weblate by @weblate in #4632 fix(macos): prevent config tab content from rendering behind tab bar by @Mitnitsky in #4627 fix(macos): use CGRequestScreenCaptureAccess instead of grabWindow for permission request by @Mitnitsky in #4617 Fix KDE Plasma keyboard shortcut config file by @ElTh0r0 in #4637 fix(macos): fix clipboard copy failing from tray and GUI by @Mitnitsky in #4629 feature(macos): show dock icon when config window is open by @Mitnitsky in #4628 Option to disable tray icon on Windows by @ElTh0r0 in #4634 Translations update from Hosted Weblate by @weblate in #4642 fix(macos): make fullscreen capture overlay configurable by @Mitnitsky in #4622 Update GH actions using Node.js 24 by @ElTh0r0 in #4660 fix issue with screen selection in non interactive mode by @borgmanJeremy in #4667 Uniformize both spec files + ninja build openSUSE by @QuentiumYT in #4658 screengrabber: pass non-empty parent_window to xdg-desktop-portal by @artefaktor93 in #4664 Allow multiple flameshot GUI instances (fix for #3177) by @ElTh0r0 in #4680 Unify Linux ARM CI into Linux CI (also drop QEMU) by @theofficialgman in #4702 respect system proxy settings by @borgmanJeremy in #4674 Replace ifdef LINUX with UNIX to include BSD systems by @ElTh0r0 in #4700 Download: Flameshot 14.0 RC3 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
    • Week One Done
      jefred earned a badge
      Week One Done
    • Apprentice
      JoeyNeo went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      490
    2. 2
      PsYcHoKiLLa
      233
    3. 3
      Skyfrog
      78
    4. 4
      FloatingFatMan
      68
    5. 5
      Michael Scrip
      58
  • Tell a friend

    Love Neowin? Tell a friend!