Recommended Posts

I thought they'd fixed slow start up times?

Been using beta 12 for about a week (fully clean install), and it's gone back to taking up to 7 seconds to start (Phenom II X955 BE, 4GB 800mhz RAM). Not good enough really. I've had Chrome installed on the same machine and used it daily for about 6 months, and it starts in less than a second.

Mine starts at about 4-6 seconds. Chrome (with extensions and web apps) loads its window in a snap but is irresponsive for about 2 seconds (bookmarks does not load right away). With all due respect, I don't really get this hate for firefox merely because it takes roughly 5-7 seconds at startup cause it's not as if opening your browser (warm boot) is a matter of life and death to the point that 7 seconds is so precious. A browser isn't all about start up time (again, warm boot). But then again, as I've said before, browser choice is all about user satisfaction so I respect other people's views.

  • Like 3

Holy Cow!!

have a look at this!!

https://mozillademos.org/demos/dashboard/demo.html

Mine starts at about 4-6 seconds. Chrome (with extensions and web apps) loads its window in a snap but is irresponsive for about 2 seconds (bookmarks does not load right away). With all due respect, I don't really get this hate for firefox merely because it takes roughly 5-7 seconds at startup cause it's not as if opening your browser (warm boot) is a matter of life and death to the point that 7 seconds is so precious. A browser isn't all about start up time (again, warm boot). But then again, as I've said before, browser choice is all about user satisfaction so I respect other people's views.

exactly , who wants f1 for a long peaceful journey and not a limo :|

My bad. I meant memory. High memory usage to me is about 200,000k, with one or two tabs open after a few minutes of usage.

That doesn't sound too crazy, if you're navigating around sites during those few minutes.

Been using beta 12 for about a week (fully clean install)

What do you mean by fully clean install exactly? No existing profile?

Edit: I feel like I should mention, on a new profile I started with Fx4 beta back in October (but with many synced bookmarks from another laptop, upgraded through to RC1), my startup times (with several addons, and about 10-15 immediate tabs) are about 1-2 seconds for everything to appear. (Followed by sites finishing loading). It certainly doesn't feel slow.

I thought they'd fixed slow start up times?

Been using beta 12 for about a week (fully clean install), and it's gone back to taking up to 7 seconds to start (Phenom II X955 BE, 4GB 800mhz RAM). Not good enough really. I've had Chrome installed on the same machine and used it daily for about 6 months, and it starts in less than a second.

Then use Chrome, because it starts in less then a second. Isn't it just wonderful? :sleep:

Mine starts at about 4-6 seconds. Chrome (with extensions and web apps) loads its window in a snap but is irresponsive for about 2 seconds (bookmarks does not load right away). With all due respect, I don't really get this hate for firefox merely because it takes roughly 5-7 seconds at startup cause it's not as if opening your browser (warm boot) is a matter of life and death to the point that 7 seconds is so precious. A browser isn't all about start up time (again, warm boot). But then again, as I've said before, browser choice is all about user satisfaction so I respect other people's views.

To be honest it can be done quicker it depends on the conditions.

I have Firefox 4b set to open up with all previous tabs when I start it and it clears active logins and cache when it closes. If I close it now with 20 tabs open and open it again it loads in 1 second and all 20 tabs are fully loaded and drawn in 5.

From a fresh reboot of Windows it took 3 seconds to open and 10 for every page to be loaded and drawn.

The page loading/drawing is also a factor caused by the size of my hosts file (~600kb)

I am still using Beta 12, and when using the find box to search the page it will at times find a match with in a link, and because that link is highlighted the little status address thing pops up and covers the highlighted word.

Not seeing that issue - I don't get a link target popup when Ctrl+F finds linked text. On RC1.

Are they not going to put the blur underneath the "glass" in these things?:

31568924.jpg

Where do I get the builds with all that eye-candy incorporated into it? Are those tryserver builds or others?

I'm a little disappointed since the doorhanger style download manager and other stuff is not going to make it into Fx4. :no:

"Are We Pretty Yet?"... Psssh! Yeah right! :angry:

  • Like 1

Annoyances

Title is not displayed in the title bar

Extensions are broked (but this is expected)

edit: https://addons.mozilla.org/en-us/firefox/addon/titlebar-text/

The title bar text seems unnecessary given two reasons: the FF window is likely to be maximized for majority of the time so you won't see it and the tab title text is already sufficient.

The title bar text seems unnecessary given two reasons: the FF window is likely to be maximized for majority of the time so you won't see it and the tab title text is already sufficient.

When I have multiple tabs on I can't read the titles. Just the first word or so. Its annoying as hell. Also, I don't have tabs on top.

My new annoyance is that that bookmarks don't open in a dropdown menu. I find the new UI overall annoying. Makes everything much more difficult to use. It looks pretty, but I don't want to handicap usability for looks.

edit: I give up, re-enabling the menu bar.

When I have multiple tabs on I can't read the titles. Just the first word or so. Its annoying as hell. Also, I don't have tabs on top.

Personal Titlebar

right click -> customize-> find Title Bar text-> grab and put it wherever you please

My new annoyance is that that bookmarks don't open in a dropdown menu. I find the new UI overall annoying. Makes everything much more difficult to use. It looks pretty, but I don't want to handicap usability for looks.

see my post above

edit: I give up, re-enabling the menu bar.

see Udedenkz post above.

You can always ask first.

I'm trying to get multi-row bookmark toolbars to work with Firefox 4 RC Build 1. Can someone try this stylish and confirm that it works? http://userstyles.org/styles/29428 Can you add any bookmark/rss feed to multiple toolbars? For example, could I have my Livemarks (RSS Feeds) on one toolbar, then bookmarks on another right below it? Is there a limit to how many toolbars you can have? Let me know. Thanks!

The icon disappears as when I hit the Done button.

It's because you have the bookmarks toolbar enabled. If you have it enabled, the 'dropdown' will be on the far right of your bookmarks bar.

I'm trying to get multi-row bookmark toolbars to work with Firefox 4 RC Build 1. Can someone try this stylish and confirm that it works? http://userstyles.org/styles/29428 Can you add any bookmark/rss feed to multiple toolbars? For example, could I have my Livemarks (RSS Feeds) on one toolbar, then bookmarks on another right below it? Is there a limit to how many toolbars you can have? Let me know. Thanks!

With all due respect, why don't you try that stylish yourself?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WinSnap 6.2.3 by Razvan Serea WinSnap is a fast and user-friendly utility for taking and editing screenshots. It easily captures windows with rounded corners and transparent backgrounds from Aero Glass on Windows 7 to Mica Material on Windows 11. Right after capture, WinSnap instantly enhances screenshots with professional-looking shadows, reflections, outlines, highlights, watermarks, arrows, shapes and text annotations. WinSnap runs on Windows 11, 10, 8, 7, Vista and XP (32-bit and 64-bit). It handles Aero Glass and shadows on all supported OS. Native 64-bit version is included in the setup package. WinSnap key features: Flexible screen capture capabilities Smoothing shadow effect in Photoshop style Powerful image processing and basic canvas transformations Support of various image formats and advanced auto-save options Easy Web publishing and E-Mail sending Multilingual user interface (Unicode based) Easy makes screenshots of windows with rounded corners WinSnap saves info about window form and adds real smoothing shadows. Alpha-Channel and PNG/TIFF transparency are supported. Unique "Application" capture mode allows you to capture all visible windows of the foreground application with one click. Unique "Multi-Object" capture mode allows you to select multiple windows on the screen and easy combine them into one screenshot. Basic coloring effects and canvas transformations. Advanced auto-save and auto-copy options. Configurable External Tools menu to open image editors and optimizers. Usual keyboard and mouse control (Print Screen replacement). Advanced resize feature: to width/height and to percentage Outline color and larger shadows for shapes and text Pixelate tool to hide sensitive information on screenshots Larger icons and buttons for high-DPI screens Number keys are used for tool selection now WinSnap 6.2.3 changelog: Added Czech language and polished 12 other translations Live window resize without "Processing..." text Optimized drawing of multiple complex objects on screenshot Improved shadow/blur generation speed on 4k+ resolutions Reduced memory usage in region capture mode Fixed an issue with reflection in 24bpp format Some other minor improvements and bug fixes Download: WinSnap 6.2.3 | 3.6 MB (Shareware) View: WinSnap Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Sandboxie Plus 1.17.7 / Classic 5.72.7 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.7 / Classic 5.72.7 release notes: Added added a Global Settings checkbox for ForceBoxDocs under Program Control > Force Process Options Changed disabled rich text acceptance in 'Edit ini Section' baa6968 extended completion system with context-aware filtering, improved INI key resolution, regex updates, and tooltip placement enhancements 6db2a04 Fixed fixed crash in VMware when running inside sandbox caused by NtQueryDirectoryObject hook returning non-null-terminated strings and uninitialized padding bytes in OBJECT_DIRECTORY_INFORMATION structures, which caused QueryDosDeviceW to crash in wcscmp #5390 Add short-name fallback cache and heuristics #5404 fixed addon setup not working introduced in a recent build fixed Starting from version 1.17.4, using the 'Sandbox with Data Protection' type box causes PowerShell to wait indefinitely, while there is no such bug with other types. #5408 fixed Importing encrypted box no longer creates encrypted image in v1.17.6 #5399 fixed EditorSettings fuzzy matching not applied, showing few/no completion entries, and table cell highlighting not updating fixed Error enumerating and deleting folder. #5406 fixed black box import/export when 'ProtectAdminOnly=y' (default) and SandMan does not run as admin Download: Sandboxie Plus (64-bit) | 23.3 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ocenaudio 3.19.2 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.2 changelog: Fixes a crash when starting the graphical interface without a display on Linux Fixes MP3 metadata encoding and ID3 tag writing issues on Windows Fixes a crash when loading audio with autosave enabled on Windows user paths containing non-ASCII characters Fixes a freeze when batch-processing more than 5 files with a 64-bit VST plugin Fixes some conditions in audio mixer Fixes loudness statistics for surround files and Short-Term Maximum Loudness accuracy Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.5 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.5 changelog: Fixed an issue where AnyDesk One windows would open in inconsistent positions Optimized dB bar rendering by synchronizing updates with the render timer Fixed a crash related to high volumes of incoming messages Fixed a crash that could occur when closing AnyDesk One from the tray icon Fixed an issue where certain special characters could disappear when formatting text in Chat Moved the "Jump to Newest Message" button to improve usability in Chat Improved notification delivery speed after sending a message in Chat Improved overall application stability Download: AnyDesk 9.7.5 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      238
    3. 3
      ATLien_0
      80
    4. 4
      Steven P.
      77
    5. 5
      +Edouard
      71
  • Tell a friend

    Love Neowin? Tell a friend!