Don't Disable Aero For Increased Performance


Recommended Posts

I hope the majority of you realize that if you have a discrete graphics card of any sort, you should not disable Aero expecting a performance boost. You'll actually get the opposite.

My netbook (which has a discrete graphics card) runs far better with Aero on than with Aero off. There is a good reason for this, but before I go into it, I just want to see how many, if at all, of you made the same mistake, that way I know I'm not talking to thin air.

Of course. Aero is rendered by the graphics card, the ui is offloaded there. If you switch back to classic (non-Aero) then the ui is handled by the main processor again.

I thought this was commonly known?

  • Like 2

Of course. Aero is rendered by the graphics card, the ui is offloaded there. If you switch back to classic (non-Aero) then the ui is handled by the main processor again.

I thought this was commonly known?

You are indeed correct. I also though it was commonly unknown but recently ran into a thread in which people kept stating they wanted to turn off Aero because "they didn't need that eye-candy slowing down their PC".

You'd be shocked to see how many people think it's wise.

I'm curious, what if you got a relatively low end graphics card, would disabling aero help with watching videos such as youtube/DVDs as in will it help reduce the jerkyness?

(Such as a: Mobile Intel® 965 Express Chipset Family for the graphics)

"they didn't need that eye-candy slowing down their PC".

You'd be shocked to see how many people think it's wise.

Actually, back in the day, that was the first thing you did to improve performance on your computer and if you have friends like mine, they turned it off.

I've since turned it back on, of course, and explained why.

Actually, back in the day, that was the first thing you did to improve performance on your computer and if you have friends like mine, they turned it off.

Luna (XP Themes Service) still put very minimal strain on the system.

I'm curious, what if you got a relatively low end graphics card, would disabling aero help with watching videos such as youtube/DVDs as in will it help reduce the jerkyness?

(Such as a: Mobile Intel? 965 Express Chipset Family for the graphics)

Flash (which is what YouTube runs in) is not GPU accelerated (don't quote me on that, I was reading somewhere that it is/eventually will be), so the CPU handles it. I'm not entirely sure if DVD is or not.

@_@ the 965 series is quite old. I remember my old old thinkpad had that chipset.

And for those complaining about battery life, leave Aero on, just disable transparency. The way Windows 7 works is that transparency is one of the features linked to your Power Schemes or whatever they are called. I have mine set up to go to transparent as soon as the AC cord is unplugged if I am in Power Saver mode. Although transparency is a component of Aero, transparency != Aero. I think this is where the confusion lies.

Have to admit, this is one I didn't know.

First thing I have ALWAYS done is disable eye candy crap!!

Will give it a shot.

Thanks for teaching an old dog a new thing!!

Edit:

FWIW, this makes almost absolutely no difference what so ever on my Toshiba laptop except that it changed my background and desktop wallpaper, which I HATE MS doing so thusly, I am once again disabling this BS. It's NOT enough of a performance hit one way or the other and I HATE eye candy that is totally frivilous!!

Have to admit, this is one I didn't know.

First thing I have ALWAYS done is disable eye candy crap!!

Will give it a shot.

Thanks for teaching an old dog a new thing!!

Edit:

FWIW, this makes almost absolutely no difference what so ever on my Toshiba laptop except that it changed my background and desktop wallpaper, which I HATE MS doing so thusly, I am once again disabling this BS. It's NOT enough of a performance hit one way or the other and I HATE eye candy that is totally frivilous!!

For some reason I can't edit my above post so adding another reply.

Well, actually it did change a couple things in the performance options that I don't mind. Windows 7 does run so sweet that memory isn't to much of an issue anymore, unless you have a total lack of it. I downloaded a third party theme that I liked on another computer of mine that enabled Aero also, so I've kind of gotten used to it now. I guess I'll just leave it alone. No hit either way anyway!

I think having Aero on or off on modern hardware is pretty irrelevant, especially with Windows 7 which still shines on any 2-year-old computer out there. I didn't know having it off could actually hurt performance but these days there really isn't any need to run on "low eye-candy" settings, at least from my experience.

I think a good idea is to enable Aero, but disable all animations (like, maximize and minimize), to improve on sleekiness. Although this might give you a false impression of things being more slow, because when you leave the animations on, stuff loads itself while it occurs, and without animations you can clearly see that stuff still loading.

  • Like 1

For some reason I can't edit my above post so adding another reply.

Well, actually it did change a couple things in the performance options that I don't mind. Windows 7 does run so sweet that memory isn't to much of an issue anymore, unless you have a total lack of it. I downloaded a third party theme that I liked on another computer of mine that enabled Aero also, so I've kind of gotten used to it now. I guess I'll just leave it alone. No hit either way anyway!

The reason is that Aero itself is a theme. A theme includes everything from window borders, min/max/close buttons, and wallpaper. Switching to Classic or Basic will do the same.

Aero is not the theme, Aero is the UI framework, the module of windows that processes the GUI AND the theme!

What I meant is that he was previously either using Windows Classic or Aero Basic, and he was selecting one of the Aero themes from this group:

ff38g1.png

Therefore, what I was clarifying was that the reason his wallpaper changed is because any of the Aero themes are actually just a combination of different window colors and a set of wallpapers.

But what about games? Is the UI still drawn (but not visible), does it load it to the memory, in any case isn't it better to turn off aero if you are gaming?

It all depends on whether or not you have a discrete graphics card and what the specs of that card are.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!