HELP! Windows 7 aero and transparency not working.


Recommended Posts

so I installed win7 back in January, and aero and transparency never had problems.

but due to my battery's short life, I have to switch to the basic theme when on the go.

But I've never had problems with switching back to aero with the transparency.

So anyway, sometime in April I've switched to basic theme and haven't switched back until now.

But when I try to use the aero theme, transparency won't work. (this happened before, but it comes back to aero once I click troubleshoot)

So I clicked troubleshoot, and it took a minute with a message 'desktop window management is disabled'

I did some research online, and restarted dwm in services. but I still have the same error.

any help? thanks in advance.

here's the winsat log:

425250051 (2572) - winsat\logging.cpp:0815: --- START 2010\5\26 18:56:22 PM ---

425250067 (2572) - winsat\main.cpp:4301: Command Line = "B:\Windows\system32\winsat.exe" formal -cancelevent d4ba1265-446b-45a1-a9b9-47b1d3743b37

425250067 (2572) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

425250925 (2572) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.

425251003 (2572) - winsat\main.cpp:4585: Watch dog system enabled

425251221 (2572) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds

425266244 (2572) - winsat\main.cpp:2505: > DWM not running.

425266244 (2572) - winsat\main.cpp:2470: > EMD service will be restored on exit.

425284294 (2572) - winsat\syspowertools.cpp:0983: > Read the active power scheme as 'a1841308-3541-4fab-bc81-f71556f20b4a'

425284294 (2572) - winsat\main.cpp:2793: > power policy saved.

425284730 (2572) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

425284746 (2572) - winsat\main.cpp:2814: > power policy set to maximum.

425286961 (2572) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

425286961 (2572) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

425286961 (2572) - winsat\main.cpp:1775: > Run Assessment features

425289941 (2572) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

425321266 (2572) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 1769340

425321266 (2572) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

425321266 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

425337037 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

425350766 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

425370827 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

425393666 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

425399906 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

425405569 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

425411996 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

425418330 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

425424070 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

425429515 (2572) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6

425435599 (2572) - winsat\main.cpp:1775: > Run Assessment mfmedia -input B:\Windows\Performance\WinSAT\winsat.wmv -nopmp

425443711 (2572) - winsat\main.cpp:1775: > Run Assessment mediaex -input B:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

425474849 (2572) - winsat\main.cpp:1775: > Run Assessment mediaex -input B:\Windows\Performance\WinSAT\Clip_1080_5sec_VC1_15mbps.wmv -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog

425521680 (2572) - winsat\main.cpp:1775: > Run Assessment mediaex -input B:\Windows\Performance\WinSAT\Clip_480i_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

425541071 (2572) - winsat\main.cpp:1775: > Run Assessment mediaex -input B:\Windows\Performance\WinSAT\Clip_480p_5sec_6mbps_new.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog

425557919 (2572) - winsat\main.cpp:1775: > Run Assessment mediaex -input B:\Windows\Performance\WinSAT\Clip_1080_5sec_10mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 135 -expfrmmax 150 -overrideframetype prog

425597528 (2572) - winsat\main.cpp:1775: > Run Assessment mediaex -input B:\Windows\Performance\WinSAT\Clip_480_5sec_6mbps_h264.mp4 -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

425622317 (2572) - winsat\main.cpp:1775: > Run Assessment media -input B:\Windows\Performance\WinSAT\winsatencode.wmv -encode B:\Windows\Performance\WinSAT\winsat.prx

425650521 (2572) - winsat\main.cpp:1775: > Run Assessment moobego

425650865 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -encryption -up

425661114 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -compression -up

425671769 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2 -up

425682174 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -compression2 -up

425692501 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -encryption

425702844 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -compression

425713561 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -encryption2

425725230 (2572) - winsat\main.cpp:1775: > Run Assessment cpu -compression2

425735651 (2572) - winsat\main.cpp:1775: > Run Assessment mem

425738412 (2572) - winsat\main.cpp:1775: > Run Assessment disk -seq -read -n 0

425782218 (2572) - winsat\main.cpp:1775: > Run Assessment disk -ran -read -n 0

425808878 (2572) - winsat\main.cpp:1775: > Run Assessment disk -scen 2009 -drive B:

425811780 (2572) - storage\diskprof.cpp:2324: Unable to open temporary file. Largest available contiguous space was: -1731461106MB

425811827 (2572) - storage\diskprof.cpp:0283: The temporary file needed to perform work could not be placed on the disk. Could not find a suitable drive for the file.

425811827 (2572) - winsat\main.cpp:2056: > disk Assessment FAILED due to an error

425811858 (2572) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 1769340

425811858 (2572) - winsat\processresults.cpp:0962: > Wrote cpu expression compression score to the registry 139

425811858 (2572) - winsat\processresults.cpp:1004: Total physical mem available to the OS : 1.99 GB (2,137,022,464 bytes)

425811858 (2572) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.

425812045 (2572) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.

425812045 (2572) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 470

425812045 (2572) - winsat\processresults.cpp:1498: > Wrote random read disk score to the registry 1433

425812497 (2572) - winsat\syspowertools.cpp:1015: > Set the active power scheme to a1841308-3541-4fab-bc81-f71556f20b4a'

425812497 (2572) - winsat\main.cpp:2855: > Power state restored.

425812497 (2572) - winsat\main.cpp:2870: > Successfully reenabled EMD.

425813714 (2572) - winsat\main.cpp:2896: > Composition restarted

425813730 (2572) - winsat\watchdog.cpp:0311: Watch dog system shutdown

425813761 (2572) - winsat\main.cpp:4909: > exit value = 1.

here's what the error looks like now,

post-301972-12749640179103.png

and I've tried to update the driver from windows update, it failed.

So I downloaded the driver from intel, it's the intel 965 chipset.

but when it was installing, it got an 'unknown error' and had to exit.

so I can't install.

what can I do?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
    • Mp3tag 3.35 by Razvan Serea Mp3tag is a powerful and yet easy-to-use tool to edit metadata (ID3, Vorbis Comments and APE) of common audio formats. It can rename files based on the tag information, replace characters or words from tags and filenames, import/export tag information, create playlists and more. The program supports online freedb database lookups for selected files, allowing you to automatically gather proper tag information for select files or CDs. Mp3tag supports the following audio formats: Advanced Audio Coding (aac) Free Lossless Audio Codec (flac) Monkeys Audio (ape) Mpeg Layer 3 (mp3) MPEG-4 (mp4 / m4a / m4b / iTunes compatible) Musepack (mpc) Ogg Vorbis (ogg) OptimFROG (ofr) OptimFROG DualStream (ofs) Speex (spx) Toms Audio Kompressor (tak) True Audio (tta) Windows Media Audio (wma) WavPack (wv) Mp3tag 3.35 changelog: This version introduces a new Files options page, enhanced toolbar customization, support for RF64 WAV files, improved Discogs and MusicBrainz tag sources, and many other improvements and fixes. See the Release Notes for more details. Download: Mp3tag 64-bit | 5.7 MB (Freeware) Download: Mp3tag 32-bit | 5.2 MB Link: Mp3tag Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The FIFA World Cup is not US centric.
    • It’s amusing how Microsoft is pushing IT admins as if this was a major, game-changing update. In reality, it’s just an enablement package that bumps the build number, which is disappointing compared to the more substantial 22H2 and 24H2 releases. Technically, 25H2, 26H1, and the upcoming 26H2 are essentially the same, differing only in support schedules. They could have included the Windows K2 improvements here, but chose not to. The era of Windows being in the backburner continues, and this 26H2 release feels like an afterthought. Shame, Nadella, shame.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!