Recommended Posts

How to install System restore on server 2003

This thread describes how to install system restore on server 2003. It is not a thread for talking about WHY you might want to do this, that belongs to another thread :)

Below i will show how to do this after server 2003 is installed. I haven't tried slipstreaming this, but i imagine it could be done easily. If there's enough interest i might show how to slipstream system restore into server 2003.

Before we begin, you'll need an XP CD. Doesn't matter if it's home or pro. It shouldn't matter if it has a service pack on it, since all the files will be the same source. In testing i used a slipstreamed cd that already had sp1 on it.

In XP, system restore is installed in syssetup.inf under the inf.always section. If you have XP installed, you can open up %windir%\inf\syssetup.inf and search for [infs.Always], you'll see the section xp looks at for installing system components. You'll notice it has sr.inf, this is the inf for system restore. For server 2003, if you look at syssetup.inf you won't find sr.inf. This doesn't mean system restore won't work in server 2003, it just means they didn't install it.

So first what we're going to need to do is right click on sr.inf and select 'install', to install it on server 2003. If you have xp installed on another computer/partition you can just right click on it. If you don't, then extract \i386\sr.in_ from the XP cd to your desktop, then right click on it and select 'install'. It'll prompt you were the files are, point it to the XP CD. Once done, it'll prompt to restart, say yes.

That was easy, the next part is the tricky part. After restarting you'll get an error saying the service couldn't start. Specifically the error is error 1068. I searched google and found this link - http://www.aerdyne.com/Kbase/article_000005.htm. The error basically means it cannot run under the service it's on. In system restore's case, it runs under the network service. I know this because in services.msc, for path to executable, it says this: C:\WINDOWS\system32\svchost.exe -k netsvcs. This got me thinking so i opened up sr.inf, and found this line:

[sRSvc_delreg]

HKLM,"Software\Microsoft\Windows NT\CurrentVersion\SvcHost","SRGroup"

I opened up regedit, and this registry key didn't exist. So it seems the sr.inf doesn't register system restore to run under the network services group. Using the above registry key as an example, i opened regedit and went to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost

On the right hand side i saw netsvcs. I double clicked on it, but saw SRService no where (SRService is the name for system restore). On a hunch, at the bottom i added SRService, rebooted, and this time got no error on startup. I opened up rstrui.exe, and system restore opened fine. I also had a System restore tab in system properties now too. I was able to make a restore point fine, then restore the computer to it without any problems. So in the above key, you want to double click on netsvcs, and at the bottom of the list, you want to type in SRService (probably case sensitive).

If you're not good with the registry you can save the following as a whatever.reg file and import it, but because it's binary i can't say if it'll work. I recommend manually adding SRService to the netsvcs key.

---copy below to whatever.reg then double click on it -----

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost]

"netsvcs"=hex(7):41,00,70,00,70,00,4d,00,67,00,6d,00,74,00,00,00,41,00,75,00,\

64,00,69,00,6f,00,53,00,72,00,76,00,00,00,42,00,72,00,6f,00,77,00,73,00,65,\

00,72,00,00,00,43,00,72,00,79,00,70,00,74,00,53,00,76,00,63,00,00,00,44,00,\

4d,00,53,00,65,00,72,00,76,00,65,00,72,00,00,00,45,00,76,00,65,00,6e,00,74,\

00,53,00,79,00,73,00,74,00,65,00,6d,00,00,00,48,00,69,00,64,00,53,00,65,00,\

72,00,76,00,00,00,49,00,61,00,73,00,00,00,49,00,70,00,72,00,69,00,70,00,00,\

00,49,00,72,00,6d,00,6f,00,6e,00,00,00,4c,00,61,00,6e,00,6d,00,61,00,6e,00,\

53,00,65,00,72,00,76,00,65,00,72,00,00,00,4c,00,61,00,6e,00,6d,00,61,00,6e,\

00,57,00,6f,00,72,00,6b,00,73,00,74,00,61,00,74,00,69,00,6f,00,6e,00,00,00,\

4d,00,65,00,73,00,73,00,65,00,6e,00,67,00,65,00,72,00,00,00,4e,00,65,00,74,\

00,6d,00,61,00,6e,00,00,00,4e,00,6c,00,61,00,00,00,4e,00,74,00,6d,00,73,00,\

73,00,76,00,63,00,00,00,4e,00,57,00,43,00,57,00,6f,00,72,00,6b,00,73,00,74,\

00,61,00,74,00,69,00,6f,00,6e,00,00,00,4e,00,77,00,73,00,61,00,70,00,61,00,\

67,00,65,00,6e,00,74,00,00,00,52,00,61,00,73,00,61,00,75,00,74,00,6f,00,00,\

00,52,00,61,00,73,00,6d,00,61,00,6e,00,00,00,52,00,65,00,6d,00,6f,00,74,00,\

65,00,61,00,63,00,63,00,65,00,73,00,73,00,00,00,53,00,61,00,63,00,73,00,76,\

00,72,00,00,00,53,00,63,00,68,00,65,00,64,00,75,00,6c,00,65,00,00,00,53,00,\

65,00,63,00,6c,00,6f,00,67,00,6f,00,6e,00,00,00,53,00,45,00,4e,00,53,00,00,\

00,53,00,68,00,61,00,72,00,65,00,64,00,61,00,63,00,63,00,65,00,73,00,73,00,\

00,00,54,00,68,00,65,00,6d,00,65,00,73,00,00,00,54,00,72,00,6b,00,57,00,6b,\

00,73,00,00,00,54,00,72,00,6b,00,53,00,76,00,72,00,00,00,57,00,33,00,32,00,\

54,00,69,00,6d,00,65,00,00,00,57,00,5a,00,43,00,53,00,56,00,43,00,00,00,57,\

00,6d,00,69,00,00,00,57,00,6d,00,64,00,6d,00,50,00,6d,00,53,00,70,00,00,00,\

77,00,69,00,6e,00,6d,00,67,00,6d,00,74,00,00,00,77,00,75,00,61,00,75,00,73,\

00,65,00,72,00,76,00,00,00,42,00,49,00,54,00,53,00,00,00,53,00,68,00,65,00,\

6c,00,6c,00,48,00,57,00,44,00,65,00,74,00,65,00,63,00,74,00,69,00,6f,00,6e,\

00,00,00,68,00,65,00,6c,00,70,00,73,00,76,00,63,00,00,00,75,00,70,00,6c,00,\

6f,00,61,00,64,00,6d,00,67,00,72,00,00,00,57,00,6d,00,64,00,6d,00,50,00,6d,\

00,53,00,4e,00,00,00,53,00,52,00,53,00,65,00,72,00,76,00,69,00,63,00,65,00,\

00,00,00,00

--- copy above --------------------------------------------------------

That's it! Remember to restart both times.

Enjoy,

-gosh

post-77-1057441727.jpg

post-77-1057441727.jpg

Ok i just did a bit of editing. You know the system restore icon, looks a bit naff dont it? Kinda looks like Microsoft didnt have time to finnish it.... anyway i personally think the icon from Windows Me looks a lot nicer (i requested this icon it in another thread but its ok i found it now).

Anyway i extracted the icon group from the file, then used resource hacker to integrate the new icons into the original file. I thought id share just incase you want to use it :) just pop it in the \system32\restore\ folder.

rstrui.2k3.zip

rstrui.2k3.zip

Ok i just did a bit of editing. You know the system restore icon, looks a bit naff dont it? Kinda looks like Microsoft didnt have time to finnish it.... anyway i personally think the icon from Windows Me looks a lot nicer (i requested this icon it in another thread but its ok i found it now).

Anyway i extracted the icon group from the file, and i thought id share just incase you want to use it :).

rstrui.2k3.zip

rstrui.2k3.zip

To slipstream you would just need to add the registry key for netsvcs then copy the files for system restore into the i386 folder.

For instance in the hivesft.inf for xp youll see this:

HKLM,"SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost",netsvcs,0x00010000,\

"6to4",\

"AppMgmt",\

"AudioSrv",\

"Browser",\

"CryptSvc",\

"DMServer",\

"DHCP",\

"ERSvc",\

"EventSystem",\

"HidServ",\

"Ias",\

"Iprip",\

"Irmon",\

"LanmanServer",\

"LanmanWorkstation",\

"Messenger", \

"Netman",\

"Nla",\

"Ntmssvc",\

"NWCWorkstation",\

"Nwsapagent",\

"Rasauto",\

"Rasman",\

"Remoteaccess",\

"Schedule",\

"Seclogon",\

"SENS",\

"Sharedaccess",\

"SRService",\

"Tapisrv",\

"TrkWks",\

"W32Time",\

"WZCSVC",\

"Wmi",\

"WmdmPmSp",\

"winmgmt"

In hivesft.inf for server 2003 youll see this:

HKLM,"SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost",netsvcs,0x00010000,\

"AppMgmt",\

"AudioSrv",\

"Browser",\

"CryptSvc",\

"DMServer",\

"EventSystem",\

"HidServ",\

"Ias",\

"Iprip",\

"Irmon",\

"LanmanServer",\

"LanmanWorkstation",\

"Messenger", \

"Netman",\

"Nla",\

"Ntmssvc",\

"NWCWorkstation",\

"Nwsapagent",\

"Rasauto",\

"Rasman",\

"Remoteaccess",\

"Sacsvr",\

"Schedule",\

"Seclogon",\

"SENS",\

"Sharedaccess",\

"TrkWks",\

"TrkSvr",\

"W32Time",\

"WZCSVC",\

"Wmi",\

"WmdmPmSp",\

"winmgmt"

So just edit the server 2003 hivesft.inf file, and add SRService in that list. Then copy the files listed in sr.inf to the 2003 i386 folder. Finally, find some way to run the install. One way you could do this is with an unattend file, and have it run this command:

rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 sr.inf

Just change the path to sr.inf. That's the basic idea! That should work but untested.

-gosh

Well not quite, someone has to still get the welcome screen back up and the little user photo in the start menu. Once we have that, we will all trully have something unique. ;) Even better still if someone could pool all the hacks here (at least this kind) on this forum into an installable .exe conversion pack.

Q

Syntax Error - Microsoft didn't put System Restore on a Server OS because if the end user were to use it ( e.g. due to installing a faulty program .... ), it would cause data replication on the system - which is not good for a server in a production enviroment ....

Radish.

How are we so sure, that doing this, will make System Restore Work as its indented too?

Does it actually create "System Volume Information" in which it really does save the restore points?

or is this just some registry hack to make the application appear to work.

i'm too busy now, but tomorrow i'm planning on doing all this and doing some tests with system restore. then i'll post the results. from just installing the inf file, the tab appears in system properties, and it puts an icon in the start menu, in accessories\system tools. it seems pretty real to me.

Even without system restore you have a system volume information folder. In my original post i put that i was able to make restore points, then restore my computer to that restore point. Your just mad because you said it was "impossible" to do this, and i did it in 5 mins ;p

-gosh

make a list of questions you want me to answer about it tomorrow, i'll try to answer as many of them as possible. dunno about that automatic restore points though, cause that's every 24 hours windows is running, and i'm not using that install of windows nearly as much as xp. :/

Ok, number 1 can you lay out your guide a little more clearly minus superflous points, just action/outcome action/outcome sort of thing. (eg. Go to this directory do this, go to that directory do that, all in list format). Not that I'm sying its hard to follow, just that it could use a little cleaning up. BTW is that reg key all we need? Or is anything else required? If that's so can you post it in .reg format (I know its easy to do with notepad and change the extension, but its nice to just collect all these keys - and as I said, hopefully some day someone will get round to making an installer that will reisntate all these keys and hacks).

Q

Edited by raid517

Gosh.

All i can say is great work, You have been able to do something that has not been able to be done and that has been known as 'impossible' from the likes of myself and others.

Great guide you made there also, nice and thorough and easy to understand.

I appreciate your time in creating that guide.

Thank you so much for this.

Cheers

:D

Sorry I didn't make myself very clear, I've modified my post a little.

Anyway, great work all in all. I don't understand why people are saying its a bad thing though. Data replication in a server may be bad (why though?) but if your using it as a work station, is it still a bad idea?

Q

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
    • This AdGuard Family lifetime deal is still only $15.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 90% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $15.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $15.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • the MCT currently downloads 26200.8653, so not completely up to date.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      174
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!