Trying to reformat T4220 with a fresh XP disk. HD not found. screwed?


Recommended Posts

So I was casually browsing YouTube on my Fujitsu T4220 and it froze up and could only be restarted by holding the power button down. Then it went into a constant loop of Boot up bios>try to boot windows>safe mode?>crash back to booting up bios. I stuck a windows XP cd in (lost my recovery disk) and got to the reinstall menu, but then the installation would tell me it couldn't find the harddrive. Did the HD crash? Am I screwed?

It might be that the machine has a SATA hard drive. XP is very old and predates the SATA standard, so you have to provide the SATA drivers yourself, either on floppy disk (yes) or by creating a custom XP CD that has them slipstreamed. Another option is to look in the BIOS for an option to emulate IDE. Many machines are capable of doing this. If you find that, it should install as normal.

Strange...

Try rebooting the laptop, then press the key for entering the BIOS menu. Once there, look out for Storage capacity or something similar and see if anything is listed. If not, then your HDD is either loose (unlikely as its a laptop) or it's dead.

Edit: hdood is right, it could also be that the HDD is SATA, which is why XP is not detecting it.

It might be worth trying to boot windows and telling it not to restart automatically, that way we can try and find out why it is restarting.

Keep tapping F8 on startup until you get Windows boot options and choose 'Disable automatic restart on system failure'. If your machine is 'blue screening' we can see what the blue screen is and maybe find out what is causing it.

If it just restarts anyway then it may be worth running Hard Drive diagnostics on the machine. Diagnostic tools can normally be found on the Hard drive manufacturer's website.

The other option is going into the BIOS settings and look for something called AHCI. If this is enabled you can turn it off and Windows will usually find the hard drive.

It might be that the machine has a SATA hard drive. XP is very old and predates the SATA standard, so you have to provide the SATA drivers yourself, either on floppy disk (yes) or by creating a custom XP CD that has them slipstreamed. Another option is to look in the BIOS for an option to emulate IDE. Many machines are capable of doing this. If you find that, it should install as normal.

Just did some googling, the harddrive is in fact a SATA. With no floppy drive how can I possibly fix this machine?

Just did some googling, the harddrive is in fact a SATA. With no floppy drive how can I possibly fix this machine?

Check the BIOS for an option to disable SATA. The drive will then be seen as IDE hard drive, which XP can be installed on.

on this screen

http://i.imgur.com/kXBEu.jpg

select your hdd and more options will show up. in there should be an option to change SATA from AHCI to IDE or compatable. some times

its called some thing else.

or one more more place it will be is under the advanced menu/ internall device config

or the miscellaneous configuration

you dont have to disable SATA you jsut need to change the configuraton of the SATA mode. windows xp will then see the drive and controler

and allow you to install the OS onto the drive, once you have installed windows xp, install the chipset drivers and SATA drivers.

restart the system and enter the bios and change the SATA contoler mode back to what it was before so you can then use the drive

as intended.

use nlite to slipstream your drivers into the install...problem solved.

http://www.nliteos.com/

install, and follow directions. shouldn't be too hard if you can read, comprehend and not click through. it isn't a next next next next finish utility, it involves a slight bit of reading the screens that pop up and it involves you having the drivers. I could train a monkey to do it in five min.

'I could train a monkey to do it in five min. "

But we are not talking about monkeys -- they are easier to train than users ;) hehehehe

edit: btw when your done, your bios is quite old version, I just looked and 1.18 is the latest dated 2009 vs your 2007 ;) Maybe it added support for changing hdd mode?

edit2: just took a look at the manual and sure shows you can disable AHCI to me

post-14624-12804115024099.jpg

Edited by BudMan

you dont have to disable SATA you jsut need to change the configuraton of the SATA mode. windows xp will then see the drive and controler

and allow you to install the OS onto the drive, once you have installed windows xp, install the chipset drivers and SATA drivers.

restart the system and enter the bios and change the SATA contoler mode back to what it was before so you can then use the drive

as intended.

Okay so I went in and disabled SATA and enabled IDE. The Win XP install disk now recognizes

C: Partition1 [NTFS] 74137 MB Free

D: Partition2 [NTFS] 1561 MB Free

I went ahead and formatted the C partition. Setup formats the drive just fine. Then Setup copies files to the windows installation folder. It makes it through 100% then the computer reboots and brings me back to the format drive screen.

EDIT: Install is working as it should right now, hopefully no more speedbumps between here and full install. Thanks for the help so far, will follow up

yeah once it copies the files it will reboot, and you normally see a screen "press a key to boot of CD" -- don't press anything ;) Or as suggest remove the CD.

remote in, install nlite for him, make a answer key file with drivers using nlite, burn the new install disk, tell him to put the disk in and boot off of it and leave it for an hour, when he comes back (barring any actual hard drive issues) the desktop will be staring at him when he walks back to it.

remote in, install nlite for him, make a answer key file with drivers using nlite, burn the new install disk, tell him to put the disk in and boot off of it and leave it for an hour, when he comes back (barring any actual hard drive issues) the desktop will be staring at him when he walks back to it.

iam not going to bash the OP for his isues with the SATA contorler config. and for getting to take out the install cd after everthing was done.

but lets not confuse him even more with Nliteing his install disk. lol

congrats on getting your problem sorted out now you know a little more about your pc.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you give an example of when you would want to use Rufus over the other or vice versa? Just wondering which is the "best".
    • Oh no...the wallet is already screaming. So many games and so little time. Being old and responsible is awful!
    • LibreWolf 152.0.2-1 by Razvan Serea LibreWolf is an independent “fork” of Firefox, with the primary goals of privacy security and user freedom. It is the community run successor to LibreFox. LibreWolf is designed to increase protection against tracking and fingerprinting techniques, while also including a few security improvements. This is achieved through our privacy and security oriented settings and patches. LibreWolf also aims to remove all the telemetry, data collection and annoyances, as well as disabling anti-freedom features like DRM. LibreWolf features: Latest Firefox — LibreWolf is compiled directly from the latest build of Firefox Stable. You will have the the latest features, and security updates. Independent Build — LibreWolf uses a build independent of Firefox and has its own settings, profile folder and installation path. As a result, it can be installed alongside Firefox or any other browser. No phoning home — Embedded server links and other calling home functions are removed. In other words, minimal background connections by default. User settings updates Extensions firewall: limit internet access for extensions. Multi-platform (Windows/Linux/Mac/and soon Android) Community-Driven Dark theme (classic and advanced) LibreWolf privacy features: Delete cookies and website data on close. Include only privacy respecting search engines like DuckDuckGo and Searx. Include uBlockOrigin with custom default filter lists, and Tracking Protection in strict mode, to block trackers and ads. Strip tracking elements from URLs, both natively and through uBO. Enable dFPI, also known as Total Cookie Protection. Enable RFP which is part of the Tor Uplift project. RFP is considered the best in class anti-fingerprinting solution, and its goal is to make users look the same and cover as many metrics as possible, in an effort to block fingerprinting techniques. Always display user language as en-US to websites, in order to protect the language used in the browser and in the OS. Disable WebGL, as it is a strong fingerprinting vector. Prevent access to the location services of the OS, and use Mozilla's location API instead of Google's API. Limit ICE candidates generation to a single interface when sharing video or audio during a videoconference. Force DNS and WebRTC inside the proxy, when one is being used. Trim cross-origin referrers, so that they don't include the full URI. Disable link prefetching and speculative connections. Disable disk cache and clear temporary files on close. Disable form autofill. Disable search and form history...and more. Download: LibreWolf 64-bit | Portable 64-bit | ~100.0 MB (Open Source) Download: ARM64 | Portable ARM64 Links: LibreWolf Home Page | Addons | Screenshot | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hands on with iFlyTek AINote 2 E-Ink tablet: insanely thin and smart by Taras Buria During Amazon Prime Day 2026, iFlyTek is offering its E-Ink tablets with big discounts. The AINOTE 2 is now available at 20% off, allowing you to save quite a lot on one of the thinnest E-Ink tablets out there. I was offered a chance to look at the device, so here are my impressions. The AINOTE 2 is a large 10.65-inch E-Ink tablet that strikes you the moment you take it out of the box. It is extremely thin. At just 4.2 mm, this tablet is at the edge of what is possible for a device with a USB Type-C port. It is also very light, which makes it comfortable and enjoyable during long reading sessions. The tablet has a gold metal chassis with the front and back made of plastic. The back also features four rubber feet that prevent it from sliding around your desk when writing. Besides a USB Type-C port and an LED indicator, there are two buttons mounted on the top edge: a power button with a built-in fingerprint scanner and a dedicated AI button. I would say the fingerprint scanner is quite mid. Given that iFlyTek positions the device as a digital notebook, it makes sense to have a biometric scanner to protect sensitive information. However, it is not the fastest fingerprint reader, and sometimes it fails to recognize my finger. I assume that is due to the tablet's insane thinness. A dedicated AI button is an interesting choice, especially in the middle of the top edge. I can see this button being useful for those who heavily rely on AI and use it frequently, but I cannot help but think its placement is impractical. Having it on one of the longer sides would make so much more sense. The AINOTE 2 is a very pretty device. Gold finish with thin chassis and nearly symmetrical front bezels create a fantastic combination, and iFlyTek cleverly hides the front chin with a section that looks like an extension of the screen, housing two touch-capacitive buttons: one for AI and one for quick notes. This section can also scroll pages when you swipe from the middle to the left or right. It is a cool idea, and very handy when you need to scroll tens of pages at once. AINOTE 2's elegant look extends from its exterior to its software. The user interface is very clean and not cluttered with an abundance of buttons. The tablet prioritizes the note-taking experience, and when you unlock it, it defaults to the list of all notes and folders. Additionally, there is a separate "Schedule" section with your calendar, tasks, memos, and other productivity features. You can connect your Outlook or Google account or use a local calendar. The tablet has quite a lot of AI features powered by OpenAI's GPT-5 and Google's Gemini 3. Besides a standard app with all your chats, you can invoke AI by pressing its dedicated button and dictating your request. It is not limited to just chats. It works with the built-in calendar, and you can tell it to create events, tasks, notes, and more. Additionally, AI features are integrated into the built-in notepad, allowing you to summarize notes, ask questions about your notes, and more. The tablet can OCR handwritten text in different languages (about 120 languages, which is very impressive), and it surprised me with very good accuracy. Voice note transcription is also available, including a "multiplayer" mode where the tablet detects each speaker. Unfortunately, the AINOTE 2 has no built-in speakers (even though it somehow makes a tapping noise when you flip pages using the Quick Bar), so the only way to listen to something is to connect a Bluetooth speaker or headphones. However, there are four front-facing mics for dictation, voice notes, AI chats, and more. Unfortunately, certain features require a Pro subscription that costs $5.99/mo or $59.99/year. Those include offline voice transcription, access to better AI models, the ability to edit notes on a PC or mobile app, and extended service coverage similar to Apple Care. It is a bummer to see yet another app, especially in a device that costs $649, but at least they give a free 90-day trial so that you can see if the benefits justify the price. As for the reader, it supports PDF, EPUB, TXT, MOBI, AZW3, DOC(X), XLS(X), PPT(X), JPEG, JPG, and PNG. The app is quite customizable, with features like text contrast/boldness/size adjustments, margins and spacing customization, and the ability to load custom fonts. Plus, you can annotate books with the stylus, add text notes, and use AI to work with them. Just keep in mind that most AI features require an active internet connection. Like with other E-Ink tablets with Android inside, you can load any other reader you want from the Google Play Store or a third-party source. Despite its hefty price tag of $629 or $519 by the time of publishing this article during Prime Day 2026, the AINOTE 2 has quite modest hardware inside. There is only 4 GB of RAM and about 42GB of storage. It is powered by the RockChip RK3576 processor with 8 cores at 2.2 GHz. Given that the tablet runs Android 14 and has Google Play, you can install Android apps, but do not expect much from this thing performance-wise. As for the battery, there is a 4,000 Li-Ion battery, which, on full charge, lasted me for about one week of active daily use of reading and note-taking. The screen has a resolution of 1920x2560 pixels, which equals 300 PPI, a perfect spot for a sharp, nice-to-read display. It supports EMR styluses that do not require charging, and I have to say that the note-taking experience on this tablet is fantastic. Stylus lag is nearly imperceivable, creating a very natural, paper-like feel. The stylus comes in the box (including two extra nibs), and it features an extra button for various actions and an eraser on top. It magnetically attaches to the tablet and stays safely secured. The stylus has a very nice coarse texture, and thanks to using Wacom tech, you can swap it for any other EMR pen if you wish. The AINOTE 2 has no front light, and because of that, the display sits very close to the screen surface, reducing the distance between the stylus tip/your finger and the display to a minimum. No front light is certainly an inconvenience in certain scenarios, but the screen makes up for that with a seriously impressive paper-like feel and writing experience. In dark conditions, you will have to find a lamp, but the good thing is that the screen has a solid anti-glare surface that diffuses light. The display has two modes: Crisp and Fast. Crisp ensures the image stays, well, crisp and sharp, while Fast speeds up refresh rate and response by toning down display resolution and making everything a bit more jagged. In my testing, I only used Fast mode when browsing the web for a much faster render time. The iFlyTek AINOTE is an impressive device, but it's not flawless. A few things disappointed me during a week of using it. Software localization has a bunch of not necessarily broken, but certainly awkward, machine-translated English. System navigation is not good, as there is no universal "Home" gesture. To go to the main page, you have to swipe up and then press the Home button from the multi-tasking window. There are many gestures for various actions, such as display cleanup, screenshot, undo/redo, but no back/forward or Home gestures. I really hate that the tablet won't let me update its software without creating an iFlyTek account first. Finally, privacy could be a concern for some, as most tablets' features require an active internet connection, an iFlyTek account, and sharing data when using AI. If you can overlook its quirks, some of which could be addressed with software updates (I received two with massive changelogs over a single week), and accept a $519 price tag (with a discount), you will be happy with the AINOTE 2. However, if you do not need that many AI features in an E-Ink reader or you want something a bit more affordable, you'd better look at cheaper competitors from BOOX or Amazon, such as the BOOX Go 10.3 Gen 2 or the Kindle Scribe, which is currently 24% off during Prime Day sales. Buy iFlyTek AINOTE 2 on Amazon - $519 | 20% off with Prime What I liked What I disliked Very impressive hardware Beautiful design Fantastic display with an EMR stylus Supports offline voice transcription Easy-to-use software Clever, useful, and well-made AI features A fingerprint scanner Very expensive Some features require a subscription Poor system navigation Mandates a user account No speakers Privacy could be a concern Note: iFlyTek provided the review unit without any editorial input or review guidance. As an Amazon Associate, we earn from qualifying purchases.
    • Look up "greed". If you are willing to buy that it's only inflation, I've got a bridge to sell you.
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      416
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      132
    4. 4
      Xenon
      73
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!