[SOLVED] Default gateway erased/reset/lost on reboot


Recommended Posts

Ok so as the title says , my tcpip default gateway gets reset on reboot , i have to manually set it again for my connection{static ip} to work.... Googling has not helped , i've tried everything - reseting tcpip , winsock , drivers - old and latest, meddling with the tcpip /interface registry entries , a win7 x64 clean reinstall fixed the problem for a while but it popped back suddenly and i cannot find the cause for it .

Someone please help me out . thanks

Hi,

As per the issue description and the steps you mentioned, i seems you have tried all possible steps to fix the problem. Here is what i will suggest and that should fix the issue.

On the problem machine, Expand to following location in registry editor.

HKLM__System__Current Control Set__Control__Network

In the right side pane, there is a REG_BINARY key named "Config", delete this key and reboot the machine and it should fix the problem.

Note : Its highly recommended to take the back up of the registry before you make any changes.

Thanks,

TechyAdmin

to be honest I find this a little hard to believe.. So for example your static set a lets say

192.168.1.100

255.255.255.0

192.168.1.254

And your saying the 192.168.1.100 and the mask stay but your gateway is gone? Is it all zeros? Just empty, what?

On your advanced IP setting do you have multiple IPs or multiple gateways setup? How many nics do you have in this machine? Do you have a wireless card as well as your ethernet? Are you connecting to multiple networks at the same time? 2 wired, wired and wireless?

You must have something on boot that is trying to set your IP, do you have any 3rd party software for location based IP settings running? What happens when you boot into safe mode with networking?

So your saying it keeps your IP and mask -- just the gateway is missing? That makes no sense what so ever.. Are you using IPv6?

Can you post the output of your ipconfig /all before you fix the gateway issue.

Using IP4 .. heres the output from ipconfig

Ok this is just after I reboot

lMsm8.png

this is after a few second it gets the auto configuration ip , however DHCP is disabled , I tried to disable autoconfiguration IP using this registry key ,but it doesnt seem to work

  Quote
Parameter: IPAutoconfigurationEnabled

Type: Reg_Dword

Value: 0 or 1

Key: tcpip/parameters for all NICs

Key: tcpip/parameters/interfaces/interface for that NIC

tdJvT.png

4TY2A.png

this is after I set my gateway , all normal.

@TGT: Not really ,I removed adobe pdf reader just to check . no luck

where is it getting the opendns servers for dns from if its using APIPA?

When you set to static IP vs dhcp, are you and admin account? Do you have UAC enabled?

Autoconfiguation is different than dhcp. And where exactly is the dword you setting?

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\<Adapter GUID>

Note The Adapter GUID subkey is a globally unique identifier (GUID) for the computer's LAN adapter.

Specifying a value of 0 for IPAutoconfigurationEnabled DWORD

So once you set this and reboot -- and you go back into the registry is it still set?? If you have that set in the correct place an ipconfig /all is showing its still enabled - then something wrong with the as far as permissions, or if missing something over writing the key, etc. etc. once you set a static it should be in the KEY. example

post-14624-12813691684902.jpg

Seems like to me your key is not being saved with the setting, or something is over writing it on reboot, etc. So look at your key after you make your static settings.. Now reboot, what is shown in the key? You can view exactly what the guid is for your interface with the

C:\Windows\system32>net config rdr

Computer name \\QUAD-W7

Full Computer name quad-w7.local.lan

User name <snipped>

Workstation active on

NetBT_Tcpip_{85B20B24-8E34-4B9F-B804-B9FE8BE17F9B} (00219B03ACA7)

Software version Windows 7 Ultimate

Workstation domain LOCAL

Logon domain quad-w7

COM Open Timeout (sec) 0

COM Send Count (byte) 16

COM Send Timeout (msec) 250

The command completed successfully.

edit: you most likely need to be running from an elevated prompt for the net config command to work.

Ok I entered that dword value into the interface key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\<Adapter GUID>

and apipa is now disabled. i'm on a admin account and uac is disabled .

Gateway is still erased on reboot. I thought it was the permissions too , I verified the permissions to the TCPIP key and it was proper.

and btw there's only 1 subkey - guid in interface key and all the arrowed-entries are present

So you seeing the gateway get placed into the key when you set it using the adapter config gui, and then when you reboot its gone??

Makes no sense -- you have to have something doing a config of your adapter on bootup, or importing the key settings, etc. Very Very ODD!!

You could to monitor your reg and see what is making the change.

http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx

So its there, just not getting read?

I would do a full reset of the your ip stack

netsh int ip reset

You will elevated prompt to do this.

edit: ah I see you stated you did this? "reseting tcpip" Is that command you ran?

Hey for grins -- take a look at your gateway reg key, does there happen to be a blank line above your gateway IP?

post-14624-12813754353209.jpg

Edited by BudMan

Holy crap! I Just noticed my defaultgateway key was a single string REG_SZ as opposed to REG_MULTI_SZ in your screenshot . omg the smallest of things , i'm gonna reboot n check it out

edit: nope , didnt work , i thought there was a breakthru here lol

  On 09/08/2010 at 17:43, lordvj said:

Holy crap! I Just noticed my defaultgateway key was a single string REG_SZ as opposed to REG_MULTI_SZ in your screenshot . omg the smallest of things , i'm gonna reboot n check it out

edit: nope , didnt work , i thought there was a breakthru here lol

This might work - Doesn't solve the root problem, but is a patch to hold it together, why not have a script launch at Start up to automatically change the Gateway from ___.___.___.___ to the address you want.

Does not make any sense that it would of been a REG_SZ?? Some software must of jacked that up?? I have even looked at my XP box and its a REG_MULTI, very strange...

I had just noticed from you screenshots that the subnet mask does change as well.

255.255.0.0

&

other screenshot says:

255.255.255.0

Not sure if this was a onetime typo but just a note FYI

** EDIT **

I have seen this one time before while doing support to the clients network now that I am thinking about it. Ill ask around the office.

1) Have you changed your router or router firmware recently?

2) Which router and model + firmware do you have?

3) Do any other device experience this issue? Laptops? XBOX? Phones?

** EDIT 2 **

It was solved by the time i hit submit , ignore my stuff

Since he is setting his IP static -- does not mater what router or dhcp server he might be using, since this would never come into play at all. As to the netmask changes you saw.. Those were from APIPA which defaults to 16bit mask, that was not him setting his IP or mask.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This feature has been useful when applying for jobs and creating/editing cover letters in seconds! Not worried MS might see the jobs I'm applying to 🤣
    • What annoys me is the people that try to buy a higher end product, and then low ball you, and say but I don't need that function, all I need is to use it for video out so I don't feel like paying higher price.   I had a person that was trying to buy RTX 3080 from me for $100 and his excuse was, well I won't be playing games on it, I just need four monitor outout. Or someone was trying to buy 2TB Gen5 M.2 for $50, well I don't need the speed, is just for basic storage. Or i was offered $80 for 20TB hard drive, that person said well, right now I only about 7TB, so rest won't be in use Just some examples in last month or two...   The guy with the 3080, I replied to with something like go to Chevy dealer and offer them $15K for that brand new corvette and tell them that you you only need to drive to work, so you don't need to go fast.   There a lot of low ballers that try to take advantage.
    • Not in Syracuse, NY. They're about to break ground! https://www.syracuse.com/micro...on-and-other-tech-jobs.html
    • Here in Finland we have lots of rural areas with narrow roads, one of the highest taxes in the world (cars are taxed way above EU standards) and fuel is quite expensive. Yet we educate our drivers to drive responsibly and safely in all areas, and our people respect each others rights and freedom to move around safely. Which is why we have even small children under 10 years old walking and cycling alone to schools in the streets, even in big cities. Safety is about being responsible and about respecting others. And I would hate to see AI (or anyone else) destroy our way of life. There are and always will be outliers, accidents happen and machines break. I dont't want to see people relying on AI to do things like driving for them. I want people to think and react to the world around them themselves, and being responsible instead of them browsing TikTok or whatever instead of looking out the window, and then saying that "It wasn't me, it was the car". Already people walk around town with their eyes glued to a screen – I don't want people driving around the same way.
    • And I should hope none will. I don't want to walk ouside to have some randome AI drive over me and mine. Not that I want a person to do it either but I want there to be an actual person who takes responsibility of their actions instead of relinquishing control to a machine. In some highways I can accept self-driving, but even then there should be some kind of dead man switch etc. that actually monitors the drivers status.
  • Recent Achievements

    • One Month Later
      POR2GAL4EVER earned a badge
      One Month Later
    • One Year In
      Orpheus13 earned a badge
      One Year In
    • One Month Later
      Orpheus13 earned a badge
      One Month Later
    • Week One Done
      Orpheus13 earned a badge
      Week One Done
    • Week One Done
      serfegyed earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      ATLien_0
      248
    3. 3
      +FloatingFatMan
      177
    4. 4
      +Edouard
      166
    5. 5
      Xenon
      118
  • Tell a friend

    Love Neowin? Tell a friend!