[SOLVED] Default gateway erased/reset/lost on reboot


Recommended Posts

Ok so as the title says , my tcpip default gateway gets reset on reboot , i have to manually set it again for my connection{static ip} to work.... Googling has not helped , i've tried everything - reseting tcpip , winsock , drivers - old and latest, meddling with the tcpip /interface registry entries , a win7 x64 clean reinstall fixed the problem for a while but it popped back suddenly and i cannot find the cause for it .

Someone please help me out . thanks

Hi,

As per the issue description and the steps you mentioned, i seems you have tried all possible steps to fix the problem. Here is what i will suggest and that should fix the issue.

On the problem machine, Expand to following location in registry editor.

HKLM__System__Current Control Set__Control__Network

In the right side pane, there is a REG_BINARY key named "Config", delete this key and reboot the machine and it should fix the problem.

Note : Its highly recommended to take the back up of the registry before you make any changes.

Thanks,

TechyAdmin

to be honest I find this a little hard to believe.. So for example your static set a lets say

192.168.1.100

255.255.255.0

192.168.1.254

And your saying the 192.168.1.100 and the mask stay but your gateway is gone? Is it all zeros? Just empty, what?

On your advanced IP setting do you have multiple IPs or multiple gateways setup? How many nics do you have in this machine? Do you have a wireless card as well as your ethernet? Are you connecting to multiple networks at the same time? 2 wired, wired and wireless?

You must have something on boot that is trying to set your IP, do you have any 3rd party software for location based IP settings running? What happens when you boot into safe mode with networking?

So your saying it keeps your IP and mask -- just the gateway is missing? That makes no sense what so ever.. Are you using IPv6?

Can you post the output of your ipconfig /all before you fix the gateway issue.

Using IP4 .. heres the output from ipconfig

Ok this is just after I reboot

lMsm8.png

this is after a few second it gets the auto configuration ip , however DHCP is disabled , I tried to disable autoconfiguration IP using this registry key ,but it doesnt seem to work

  Quote
Parameter: IPAutoconfigurationEnabled

Type: Reg_Dword

Value: 0 or 1

Key: tcpip/parameters for all NICs

Key: tcpip/parameters/interfaces/interface for that NIC

tdJvT.png

4TY2A.png

this is after I set my gateway , all normal.

@TGT: Not really ,I removed adobe pdf reader just to check . no luck

where is it getting the opendns servers for dns from if its using APIPA?

When you set to static IP vs dhcp, are you and admin account? Do you have UAC enabled?

Autoconfiguation is different than dhcp. And where exactly is the dword you setting?

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\<Adapter GUID>

Note The Adapter GUID subkey is a globally unique identifier (GUID) for the computer's LAN adapter.

Specifying a value of 0 for IPAutoconfigurationEnabled DWORD

So once you set this and reboot -- and you go back into the registry is it still set?? If you have that set in the correct place an ipconfig /all is showing its still enabled - then something wrong with the as far as permissions, or if missing something over writing the key, etc. etc. once you set a static it should be in the KEY. example

post-14624-12813691684902.jpg

Seems like to me your key is not being saved with the setting, or something is over writing it on reboot, etc. So look at your key after you make your static settings.. Now reboot, what is shown in the key? You can view exactly what the guid is for your interface with the

C:\Windows\system32>net config rdr

Computer name \\QUAD-W7

Full Computer name quad-w7.local.lan

User name <snipped>

Workstation active on

NetBT_Tcpip_{85B20B24-8E34-4B9F-B804-B9FE8BE17F9B} (00219B03ACA7)

Software version Windows 7 Ultimate

Workstation domain LOCAL

Logon domain quad-w7

COM Open Timeout (sec) 0

COM Send Count (byte) 16

COM Send Timeout (msec) 250

The command completed successfully.

edit: you most likely need to be running from an elevated prompt for the net config command to work.

Ok I entered that dword value into the interface key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\<Adapter GUID>

and apipa is now disabled. i'm on a admin account and uac is disabled .

Gateway is still erased on reboot. I thought it was the permissions too , I verified the permissions to the TCPIP key and it was proper.

and btw there's only 1 subkey - guid in interface key and all the arrowed-entries are present

So you seeing the gateway get placed into the key when you set it using the adapter config gui, and then when you reboot its gone??

Makes no sense -- you have to have something doing a config of your adapter on bootup, or importing the key settings, etc. Very Very ODD!!

You could to monitor your reg and see what is making the change.

http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx

So its there, just not getting read?

I would do a full reset of the your ip stack

netsh int ip reset

You will elevated prompt to do this.

edit: ah I see you stated you did this? "reseting tcpip" Is that command you ran?

Hey for grins -- take a look at your gateway reg key, does there happen to be a blank line above your gateway IP?

post-14624-12813754353209.jpg

Edited by BudMan

Holy crap! I Just noticed my defaultgateway key was a single string REG_SZ as opposed to REG_MULTI_SZ in your screenshot . omg the smallest of things , i'm gonna reboot n check it out

edit: nope , didnt work , i thought there was a breakthru here lol

  On 09/08/2010 at 17:43, lordvj said:

Holy crap! I Just noticed my defaultgateway key was a single string REG_SZ as opposed to REG_MULTI_SZ in your screenshot . omg the smallest of things , i'm gonna reboot n check it out

edit: nope , didnt work , i thought there was a breakthru here lol

This might work - Doesn't solve the root problem, but is a patch to hold it together, why not have a script launch at Start up to automatically change the Gateway from ___.___.___.___ to the address you want.

Does not make any sense that it would of been a REG_SZ?? Some software must of jacked that up?? I have even looked at my XP box and its a REG_MULTI, very strange...

I had just noticed from you screenshots that the subnet mask does change as well.

255.255.0.0

&

other screenshot says:

255.255.255.0

Not sure if this was a onetime typo but just a note FYI

** EDIT **

I have seen this one time before while doing support to the clients network now that I am thinking about it. Ill ask around the office.

1) Have you changed your router or router firmware recently?

2) Which router and model + firmware do you have?

3) Do any other device experience this issue? Laptops? XBOX? Phones?

** EDIT 2 **

It was solved by the time i hit submit , ignore my stuff

Since he is setting his IP static -- does not mater what router or dhcp server he might be using, since this would never come into play at all. As to the netmask changes you saw.. Those were from APIPA which defaults to 16bit mask, that was not him setting his IP or mask.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Really? Do you want it spelled out? Ok: It was a funsies way to say that we can confidently asume that their update servers were shut down years ago already, and no updates have been developed or delivered to any LG phone in years, since, to begin, LG wasn't too well known for their software support.
    • Good afternoon, I have a customer who purchased a Dell laptop last year. One of the latest Inspirons. they are older so it can be a bit hard to see things on the screen. They are using Windows 11 Home 23H2, I have not upgraded them yet to 24H2. What I did was changed the scaling to 150% and that automatically made all the icons on desktop bigger and using in Chrome webpage elements are bigger etc. The thing is I overlooked the Taskbar and the icons most notably hidden within the arrow pointing up. I though by changing to 150% the scaling even the taskbar would get bigger. Again I don't know how I missed seeing that. Is this something that can be fixed? One other thing is I notice in File Explorer things are also small and not larger after the change. Can this be fixed as well?   Thank You.
    • Apple still has two unannounced features for iOS 26 by Hamid Ganji Apple held its WWDC25 event this month to unveil a slew of AI features and its new design for operating systems, known as Liquid Glass. While iOS 26 currently has no shortage of features, the iPhone maker might still have some features under wraps that didn’t make a debut at this month’s WWDC. Bloomberg’s Mark Gurman writes in his weekly Power On newsletter that Apple didn’t announce two iOS 26 features at the WWDC event. The first feature is a live translation of conversations via AirPods, and the latter is the ability to sync your wireless network login information across devices at a hotel or gym. Even though these features were already tipped to arrive in iOS 26, Apple held them from the event, presumably because they’re still not ready to ship. Apple appears to have learned from its experience with Apple Intelligence and aims to break the habit of unveiling new features before they are ready for release. The Live Translation on iOS 26 is currently integrated with popular apps like Messages, FaceTime, and Phone to help users break language barriers and communicate in different languages. The feature is now under development for AirPods, allowing users to hear real-time speech translations. Moreover, the WiFi syncing feature allows you to sync your sign-in information across your entire Apple ecosystem, enabling you to connect to a public WiFi network with ease. This would eliminate the need to sign into a WiFi network separately on each device. While these features haven’t arrived in iOS 26 yet, they’re more likely to be released later this year, in October or December.
    • Intel Level L4 cache has been around for a long time, so AMD Zen 3D Cache is a copy of Intel L4 cache that was introduced with Broadwell i7-5775c, which had 128mb of Level L4 cache. Secondly, Zen 6 is not faster in single-threaded performance than 13900k/14900k. 285k is something new Intel is trying, basically showing us that chiplet design does not work for gaming, just like AMD design does not work for gaming. Throwing more cores at it and having L4 cache won't fix the issue, and that is frame dip and stuttering caused by a very stupid design decision to keep the memory controller outside the compute tile. Might as well put a memory controller by bringing back a south bridge chip. lol
  • Recent Achievements

    • Community Regular
      Primey_ went up a rank
      Community Regular
    • Reacting Well
      Gromvar earned a badge
      Reacting Well
    • Dedicated
      BreakingBenjamin earned a badge
      Dedicated
    • Week One Done
      Hartej earned a badge
      Week One Done
    • One Year In
      TsunadeMama earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +FloatingFatMan
      183
    3. 3
      ATLien_0
      168
    4. 4
      Skyfrog
      98
    5. 5
      Som
      96
  • Tell a friend

    Love Neowin? Tell a friend!