Recommended Posts

^ i still don't get how you have such difficulty living in heavy armor when i was staying alive just fine on a low level dual 1h sword mesmer.

I don't either.....it just seems like I take way too much damage. I can only dodge twice without waiting for endurance, which is no problem against 1 enemy (them taking me down 1v1 to the amounts I listed was just facetanking them, not with dodging and all), but when you have 2-3 enemies hitting you at once, they generally take me down really quickly no matter what class I play.....can't dodge 2-3 attacks per second when you only get 1 dodge every 5-10 seconds. I just don't understand why dodge plays such a huge roll in damage reduction while armor does not (at least not in my experience). I'm tempted to build a tanky warrior just so I don't leave town in my paper armor.

I don't either.....it just seems like I take way too much damage. I can only dodge twice without waiting for endurance, which is no problem against 1 enemy (them taking me down 1v1 to the amounts I listed was just facetanking them, not with dodging and all), but when you have 2-3 enemies hitting you at once, they generally take me down really quickly no matter what class I play.....can't dodge 2-3 attacks per second when you only get 1 dodge every 5-10 seconds. I just don't understand why dodge plays such a huge roll in damage reduction while armor does not (at least not in my experience). I'm tempted to build a tanky warrior just so I don't leave town in my paper armor.

I had a slightly different experience with melee today. I played a warrior for a bit and never had to use my heal once through the entire starting tutorial. Last time I did the same thing and had to use it fairly often. I don't know if I've just gotten more used to the game mechanics or if they've actually adjusted the mitigation of heavy armor though.

I wish they would release patch notes between the betas and stress tests. :s

So... tomorrow?

"We will be conducting a Stress Test on Friday, August 10 from 4:00 PM PACIFIC Time to 8:00 PM PACIFIC Time."

Interesting that they are doing another one back to back. They must not have nailed down what they were after today.

I wish they would release patch notes between the betas and stress tests. :s

Interesting that they are doing another one back to back. They must not have nailed down what they were after today.

If they did that, they'd be wasting so much time given how much stuff they're updating... :pinch:

This was the message they left on Facebook:

REMEMBER: We will be actively working on the game during the event, so you might experience connectivity problems or discover features that are not working as designed. Any issues you experience are a result of the rigorous conditions of the stress test, and are in no way representative of the state of the game at launch. By participating in this stress test, you?re helping us make Guild Wars 2 a better game. Thanks for your cooperation?we?ll see you in-game!

Additional notes:

* Stress Tests are open to those who have PRE-PURCHASED the game.

* Characters will not be wiped for tomorrow's Stress Test.

---

Looks like they aren't screwing around at all. It's cool seeing how hard they're working in preparation to all this. I really hope all their work results in a great payoff. No MMO has had a smooth launch really, so it'd really be interesting to see if they could pull it off. If not, I'll forgive them still but it'd be a pretty damn awesome feat to pull off. :D

If they did that, they'd be wasting so much time given how much stuff they're updating... :pinch:

I really doubt. I'm sure they have a list of things they change from day to day. It wouldn't take much for them to have an intern summarize the notes once a week.

I really doubt. I'm sure they have a list of things they change from day to day. It wouldn't take much for them to have an intern summarize the notes once a week.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

So... tomorrow?

"We will be conducting a Stress Test on Friday, August 10 from 4:00 PM PACIFIC Time to 8:00 PM PACIFIC Time."

Oh one I may actually get to participate in.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

I really doubt that they would have to go out of their way to create a short list summarizing the changes they make. They have to have a list anyways because they can't just change things randomly. It's all got to be documented somehow. Having one unimportant employee take an hour every week to summarize (not a full detailed change log) wouldn't require much on their part. The only reason I can think of that they wouldn't put out a change log at this point is because they are making changes to things they don't want people to know about before the launch of the game, and I can understand that I guess.

Still, my point was that it would be nice to know if they did in fact change things like armor mitigation so we can do more than speculate. Mostly I just want to know about the balance changes.

And the downloading between zones in GW1 was because you didn't have everything downloaded for your game. It downloads files as you go. If you wanted to you could start playing Guild Wars 1 after only downloading relatively little files. You'd just have to download the content of each new area as you progressed. When GW1 first came out I had a friend who was still sadly on a 56k modem and we experienced that quite a few times. It was even more common when they have their annual holiday events as well, because those made a lot of changes to zones for those events.

If you want to get 100% of the game files downloaded you need to put "-image" in the target area of the properties for the shortcut to your game. That works for GW2, as well.

It's definitely at a better time for you Americans this time around, very late for us (not that I'm complaining :laugh:). Glad to see them working hard trying to make improvements before the early start/launch as well. Personally, I only want to check out the crafting system during these stress tests now and try to figure out the most efficient use of resources.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

They did have the change log on the Guild Wars site and on the wiki that you could look through to see what they had changed but it would usually take a couple of hours to a few days to get that information posted up, that being said, there were small updates being done every couple of days back from what I remember. (And I mean Client changes when you launch, not the files downloaded during zone changing/loading)

As seen here: http://www.guildwars...tes/default.php

I imagine they will do the same for Guild Wars 2, as you say, they need documentation to show the changes otherwise people will start to complain about "ninja nerfs". :rofl:

- Alera :shiftyninja:

I really doubt that they would have to go out of their way to create a short list summarizing the changes they make. They have to have a list anyways because they can't just change things randomly. It's all got to be documented somehow. Having one unimportant employee take an hour every week to summarize (not a full detailed change log) wouldn't require much on their part. The only reason I can think of that they wouldn't put out a change log at this point is because they are making changes to things they don't want people to know about before the launch of the game, and I can understand that I guess.

Still, my point was that it would be nice to know if they did in fact change things like armor mitigation so we can do more than speculate. Mostly I just want to know about the balance changes.

And the downloading between zones in GW1 was because you didn't have everything downloaded for your game. It downloads files as you go. If you wanted to you could start playing Guild Wars 1 after only downloading relatively little files. You'd just have to download the content of each new area as you progressed. When GW1 first came out I had a friend who was still sadly on a 56k modem and we experienced that quite a few times. It was even more common when they have their annual holiday events as well, because those made a lot of changes to zones for those events.

If you want to get 100% of the game files downloaded you need to put "-image" in the target area of the properties for the shortcut to your game. That works for GW2, as well.

I guess man. Blizzard was having issues alone keeping up with their change logs for their betas. I'm not saying they don't have them, but to compile a list from what each developer has modified into a clear and concise format for the community to read with changes that will likely be irrelevant as soon as they're out the door is what I'm talking about. It'd just be an utter waste of time really, and judging by the pace of things at Arenanet, I don't blame them in the least.

I guess man. Blizzard was having issues alone keeping up with their change logs for their betas. I'm not saying they don't have them, but to compile a list from what each developer has modified into a clear and concise format for the community to read with changes that will likely be irrelevant as soon as they're out the door is what I'm talking about. It'd just be an utter waste of time really, and judging by the pace of things at Arenanet, I don't blame them in the least.

I understand that, but I wasn't suggesting they detail every single change they made. Just a short summary like "adjusted heavy armor damage mitigation(speculation)" and "added functionality to the minimap and changed its design". Things like that, I don't think it would be to hard to do and would cut down on a lot of speculation so people could actually say for certain if something is better or worse or just their imagination.

If you didn't know better you would never know that for example, they disabled the ability to resize the UI in bwe3 and the last 2 stress tests because it was causing issues. The only reason you would know something was up with it is if you tried to use the resize option and found out that it didn't work no matter what size you set it to.

On the other hand the stress tests aren't about getting feedback, so I suppose you have a point there.

I had a slightly different experience with melee today. I played a warrior for a bit and never had to use my heal once through the entire starting tutorial. Last time I did the same thing and had to use it fairly often. I don't know if I've just gotten more used to the game mechanics or if they've actually adjusted the mitigation of heavy armor though.

I don't know....maybe it's because you haven't gotten many levels? Warrior was ez mode up until around 10 (currently at 12), only had to use my heal once or twice. But now it seems if I fight more than 1 enemy at a time I need to really pay attention and sometimes use my heal.

In open area's, thief with a shortbow has much higher survivability than I've ever had on my warrior (though I haven't played Rifle/longbow warrior much), and in melee, warrior feels just as squishy as my thief.

I can't say much though, my highest level is 13 or so, and I really need to get some of the traits raised up a bit (swiftness, might and endurance gain on dodge as a thief? Yes please) before I can judge them.....but so far I don't feel like any of the melee primary classes (most notably warrior and thief, as I do not like guardian) are tanky enough to fight in melee against normal enemies. Also, the level scaling can get kind of annoying.....if you are travelling somewhere you have to be careful about what you run through because it might kick your butt due to the level down scaling. I like the concept, I just think it makes it too much of a hassle to travel around and enjoy the scenery that you missed at a low level.

I don't know....maybe it's because you haven't gotten many levels? Warrior was ez mode up until around 10 (currently at 12), only had to use my heal once or twice. But now it seems if I fight more than 1 enemy at a time I need to really pay attention and sometimes use my heal.

In open area's, thief with a shortbow has much higher survivability than I've ever had on my warrior (though I haven't played Rifle/longbow warrior much), and in melee, warrior feels just as squishy as my thief.

I can't say much though, my highest level is 13 or so, and I really need to get some of the traits raised up a bit (swiftness, might and endurance gain on dodge as a thief? Yes please) before I can judge them.....but so far I don't feel like any of the melee primary classes (most notably warrior and thief, as I do not like guardian) are tanky enough to fight in melee against normal enemies. Also, the level scaling can get kind of annoying.....if you are travelling somewhere you have to be careful about what you run through because it might kick your butt due to the level down scaling. I like the concept, I just think it makes it too much of a hassle to travel around and enjoy the scenery that you missed at a low level.

In bwe1 it was the exact opposite. I got my warrior to level 18 in that event and it got easier to kill and survive as I got higher. He was extremely squishy in de's where more than 5 or 6 other people were present.

But like I said, since we have no patch notes I don't know if that's just my perception or if they have actually adjusted armor damage mitigation or they have balanced mob damage in dynamic events.

I wish they would release patch notes between the betas and stress tests. :s

I've wanted this for so long. Given there can be anywhere from 100-250 new revisions(i've been keeping track) between most events it's kinda annoying not having any idea what they've changed between events outside of the utterly obvious things.

Has anyone check this?

http://guildwars2.pl/signatures,a657

Not bad, might use this so I actually have a signature.....though I don't think I want my character names that easily findable (my GW1 account got hacked awhile ago.....after they started requiring character names to log in, and I only had my character names in a small number of places). It's a shame it auto-formats the name you input to something that would actually work in GW2....tried putting in [REDACTED] as a way to hide the name field, but it reformatted it as: Redacted Probably won't use it, but I like the customization the generator offers.

Speaking of security. I find it odd that they are only requiring a password to log into the game when they had issues with that in GW1. They made it so we had to know a characters name on the account to log into it.

Maybe that will change at launch?

I'm fairly certain they'll add in the character thing after a week or two. Kinda hard to do on launch when no one has any characters :p There's also a more serious point about how some players who use random names for characters don't necessarily remember them properly until they've spent a fair chunk of time playing with them.

I'm fairly certain they'll add in the character thing after a week or two. Kinda hard to do on launch when no one has any characters :p There's also a more serious point about how some players who use random names for characters don't necessarily remember them properly until they've spent a fair chunk of time playing with them.

Nah, just run a check, if the account has no characters, do not require a character name. Otherwise, how would people just buying the game 3 months from now log in for the first time when their account has no characters?

As far as security goes, I hope they add the security token option, similar to what Blizzard has available. I like the fact that even if someone knows my password, they won't get in without my security token.

The character method is nice and all, but if someone got into Arenanet servers they would have all your character names and encrypted password. With security tokens they would get your token seed, but wouldn't know exactly how the security token values are calculated (unless they also got a hold of the authentication servers and reverse engineered the login methods that contain the token calculations).

This topic is now closed to further replies.
  • Posts

    • BleachBit 6.0.1 Beta by Razvan Serea When your computer is getting full, BleachBit quickly frees disk space. When your information is only your business, BleachBit guards your privacy. With BleachBit you can free cache, delete cookies, clear Internet history, shred temporary files, delete logs, and discard junk you didn't know was there. Designed for Linux and Windows systems, it wipes clean thousands of applications including Firefox, Microsoft Edge, Google Chrome, Opera, Safari, and more. Beyond simply deleting files, BleachBit includes advanced features such as shredding files to prevent recovery, wiping free disk space to hide traces of files deleted by other applications, and vacuuming Firefox to make it faster. Better than free, BleachBit is open source. BleachBit has many useful features: Delete your private files so completely that "even God can't read them" according to South Carolina Representative Trey Gowdy. Simple operation: read the descriptions, check the boxes you want, click preview, and click delete. Multi-platform: Linux and Windows Free of charge and no money trail Free to share, learn, and modify (open source) No adware, spyware, malware, browser toolbars, or "value-added software" Translated to 64 languages besides American English Shred files to hide their contents and prevent data recovery Shred any file (such as a spreadsheet on your desktop) Overwrite free disk space to hide previously deleted files Portable app for Windows: run without installation Command line interface for scripting and automation CleanerML allows anyone to write a new cleaner using XML Automatically import and update winapp2.ini cleaner files (a separate download) giving Windows users access to 2500+ additional cleaners Frequent software updates with new features Going beyond standard deletion of files, BleachBit has several advanced cleaners: Clear the memory and swap on Linux Delete broken shortcuts on Linux Delete the Firefox URL history without deleting the whole file—with optional shredding Delete Linux localizations: delete languages you don't use. More powerful than localepurge and available on more Linux distributions. Clean APT for Debian, Ubuntu, Kubuntu, Xubuntu, and Linux Mint Find widely-scattered junk such as Thumbs.db and .DS_Store files. Execute yum clean for CentOS, Fedora, and Red Hat to remove cached package data Delete Windows registry keys—often where MRU (most recently used) lists are stored Delete the OpenOffice.org recent documents list without deleting the whole Common.xcu file Overwrite free disk space to hide previously files Vacuum Firefox, Google Chrome, Liferea, Thunderbird, and Yum databases: shrink files without removing data to save space and improve speed Surgically remove private information from .ini and JSON configuration files and SQLite3 databases without deleting the whole file Overwrite data in SQLite3 before deleting it to prevent recovery (optional) BleachBit 6.0.1 Beta release notes: BleachBit 6.0.1 beta is now available for testing. This maintenance-focused release includes bug fixes, updated translations, and a range of safe enhancements. This release fixes a Windows security issue that could allow arbitrary file deletion during privileged cleaning (reported by Zeze with TeamT5). It also adds new cleaners (including a DNS cache cleaner, Claude Code, and Visual Studio Code forks), support for multiple Chrome and Edge profiles, new deep scan options for developer directories like node_modules and venv, and safer, faster file shredding. All Platforms Added cleaners for Claude Code, DNS cache, and many Visual Studio Code forks. Added support for multiple Chrome and Edge profiles. Chrome can now clean downloaded AI models. Deep Scan can optionally remove venv, __pycache__, node_modules, and .angular directories. Deep Scan is faster by skipping directories on the keep list. File shredding is safer, faster, and leaves fewer recoverable traces. Improved handling of cookies, symlinks, Unicode filenames, external processes, and configuration files. Improved Expert Mode warnings and long warning dialogs. Fixed crashes related to cleaner detection, invalid Unicode, and malformed cleaner data. Clipboard is now cleared automatically after shredding files via paste operations. Linux Added AppImage support. Added cleaners for Visual Studio Code, Codeium, Librewolf (.deb), Transmission (Flatpak), and Profanity. Improved Linux trash detection, including Snap-installed applications and mounted drives. Fixed Wayland root CLI issues and several Snap-related problems. Improved package dependencies, AppStream metadata, and desktop file handling. Fixed startup crashes when Python Requests is unavailable. Windows Fixed a security vulnerability that could allow arbitrary file deletion when cleaning with elevated privileges. Added %WindowsSystem% variable support. Improved clipboard clearing using native Windows APIs. Improved installer experience on unsupported Windows versions. Reduced installer size and improved application robustness. Fixed Unicode handling, filename anonymization, Git revision reporting, and splash screen stability. [full release notes] Download: BleachBit 6.0 | Portable | ~20.0 MB (Open Source) View: BleachBit Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      193
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!