Recommended Posts

^ i still don't get how you have such difficulty living in heavy armor when i was staying alive just fine on a low level dual 1h sword mesmer.

I don't either.....it just seems like I take way too much damage. I can only dodge twice without waiting for endurance, which is no problem against 1 enemy (them taking me down 1v1 to the amounts I listed was just facetanking them, not with dodging and all), but when you have 2-3 enemies hitting you at once, they generally take me down really quickly no matter what class I play.....can't dodge 2-3 attacks per second when you only get 1 dodge every 5-10 seconds. I just don't understand why dodge plays such a huge roll in damage reduction while armor does not (at least not in my experience). I'm tempted to build a tanky warrior just so I don't leave town in my paper armor.

I don't either.....it just seems like I take way too much damage. I can only dodge twice without waiting for endurance, which is no problem against 1 enemy (them taking me down 1v1 to the amounts I listed was just facetanking them, not with dodging and all), but when you have 2-3 enemies hitting you at once, they generally take me down really quickly no matter what class I play.....can't dodge 2-3 attacks per second when you only get 1 dodge every 5-10 seconds. I just don't understand why dodge plays such a huge roll in damage reduction while armor does not (at least not in my experience). I'm tempted to build a tanky warrior just so I don't leave town in my paper armor.

I had a slightly different experience with melee today. I played a warrior for a bit and never had to use my heal once through the entire starting tutorial. Last time I did the same thing and had to use it fairly often. I don't know if I've just gotten more used to the game mechanics or if they've actually adjusted the mitigation of heavy armor though.

I wish they would release patch notes between the betas and stress tests. :s

So... tomorrow?

"We will be conducting a Stress Test on Friday, August 10 from 4:00 PM PACIFIC Time to 8:00 PM PACIFIC Time."

Interesting that they are doing another one back to back. They must not have nailed down what they were after today.

I wish they would release patch notes between the betas and stress tests. :s

Interesting that they are doing another one back to back. They must not have nailed down what they were after today.

If they did that, they'd be wasting so much time given how much stuff they're updating... :pinch:

This was the message they left on Facebook:

REMEMBER: We will be actively working on the game during the event, so you might experience connectivity problems or discover features that are not working as designed. Any issues you experience are a result of the rigorous conditions of the stress test, and are in no way representative of the state of the game at launch. By participating in this stress test, you?re helping us make Guild Wars 2 a better game. Thanks for your cooperation?we?ll see you in-game!

Additional notes:

* Stress Tests are open to those who have PRE-PURCHASED the game.

* Characters will not be wiped for tomorrow's Stress Test.

---

Looks like they aren't screwing around at all. It's cool seeing how hard they're working in preparation to all this. I really hope all their work results in a great payoff. No MMO has had a smooth launch really, so it'd really be interesting to see if they could pull it off. If not, I'll forgive them still but it'd be a pretty damn awesome feat to pull off. :D

If they did that, they'd be wasting so much time given how much stuff they're updating... :pinch:

I really doubt. I'm sure they have a list of things they change from day to day. It wouldn't take much for them to have an intern summarize the notes once a week.

I really doubt. I'm sure they have a list of things they change from day to day. It wouldn't take much for them to have an intern summarize the notes once a week.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

So... tomorrow?

"We will be conducting a Stress Test on Friday, August 10 from 4:00 PM PACIFIC Time to 8:00 PM PACIFIC Time."

Oh one I may actually get to participate in.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

I really doubt that they would have to go out of their way to create a short list summarizing the changes they make. They have to have a list anyways because they can't just change things randomly. It's all got to be documented somehow. Having one unimportant employee take an hour every week to summarize (not a full detailed change log) wouldn't require much on their part. The only reason I can think of that they wouldn't put out a change log at this point is because they are making changes to things they don't want people to know about before the launch of the game, and I can understand that I guess.

Still, my point was that it would be nice to know if they did in fact change things like armor mitigation so we can do more than speculate. Mostly I just want to know about the balance changes.

And the downloading between zones in GW1 was because you didn't have everything downloaded for your game. It downloads files as you go. If you wanted to you could start playing Guild Wars 1 after only downloading relatively little files. You'd just have to download the content of each new area as you progressed. When GW1 first came out I had a friend who was still sadly on a 56k modem and we experienced that quite a few times. It was even more common when they have their annual holiday events as well, because those made a lot of changes to zones for those events.

If you want to get 100% of the game files downloaded you need to put "-image" in the target area of the properties for the shortcut to your game. That works for GW2, as well.

It's definitely at a better time for you Americans this time around, very late for us (not that I'm complaining :laugh:). Glad to see them working hard trying to make improvements before the early start/launch as well. Personally, I only want to check out the crafting system during these stress tests now and try to figure out the most efficient use of resources.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

They did have the change log on the Guild Wars site and on the wiki that you could look through to see what they had changed but it would usually take a couple of hours to a few days to get that information posted up, that being said, there were small updates being done every couple of days back from what I remember. (And I mean Client changes when you launch, not the files downloaded during zone changing/loading)

As seen here: http://www.guildwars...tes/default.php

I imagine they will do the same for Guild Wars 2, as you say, they need documentation to show the changes otherwise people will start to complain about "ninja nerfs". :rofl:

- Alera :shiftyninja:

I really doubt that they would have to go out of their way to create a short list summarizing the changes they make. They have to have a list anyways because they can't just change things randomly. It's all got to be documented somehow. Having one unimportant employee take an hour every week to summarize (not a full detailed change log) wouldn't require much on their part. The only reason I can think of that they wouldn't put out a change log at this point is because they are making changes to things they don't want people to know about before the launch of the game, and I can understand that I guess.

Still, my point was that it would be nice to know if they did in fact change things like armor mitigation so we can do more than speculate. Mostly I just want to know about the balance changes.

And the downloading between zones in GW1 was because you didn't have everything downloaded for your game. It downloads files as you go. If you wanted to you could start playing Guild Wars 1 after only downloading relatively little files. You'd just have to download the content of each new area as you progressed. When GW1 first came out I had a friend who was still sadly on a 56k modem and we experienced that quite a few times. It was even more common when they have their annual holiday events as well, because those made a lot of changes to zones for those events.

If you want to get 100% of the game files downloaded you need to put "-image" in the target area of the properties for the shortcut to your game. That works for GW2, as well.

I guess man. Blizzard was having issues alone keeping up with their change logs for their betas. I'm not saying they don't have them, but to compile a list from what each developer has modified into a clear and concise format for the community to read with changes that will likely be irrelevant as soon as they're out the door is what I'm talking about. It'd just be an utter waste of time really, and judging by the pace of things at Arenanet, I don't blame them in the least.

I guess man. Blizzard was having issues alone keeping up with their change logs for their betas. I'm not saying they don't have them, but to compile a list from what each developer has modified into a clear and concise format for the community to read with changes that will likely be irrelevant as soon as they're out the door is what I'm talking about. It'd just be an utter waste of time really, and judging by the pace of things at Arenanet, I don't blame them in the least.

I understand that, but I wasn't suggesting they detail every single change they made. Just a short summary like "adjusted heavy armor damage mitigation(speculation)" and "added functionality to the minimap and changed its design". Things like that, I don't think it would be to hard to do and would cut down on a lot of speculation so people could actually say for certain if something is better or worse or just their imagination.

If you didn't know better you would never know that for example, they disabled the ability to resize the UI in bwe3 and the last 2 stress tests because it was causing issues. The only reason you would know something was up with it is if you tried to use the resize option and found out that it didn't work no matter what size you set it to.

On the other hand the stress tests aren't about getting feedback, so I suppose you have a point there.

I had a slightly different experience with melee today. I played a warrior for a bit and never had to use my heal once through the entire starting tutorial. Last time I did the same thing and had to use it fairly often. I don't know if I've just gotten more used to the game mechanics or if they've actually adjusted the mitigation of heavy armor though.

I don't know....maybe it's because you haven't gotten many levels? Warrior was ez mode up until around 10 (currently at 12), only had to use my heal once or twice. But now it seems if I fight more than 1 enemy at a time I need to really pay attention and sometimes use my heal.

In open area's, thief with a shortbow has much higher survivability than I've ever had on my warrior (though I haven't played Rifle/longbow warrior much), and in melee, warrior feels just as squishy as my thief.

I can't say much though, my highest level is 13 or so, and I really need to get some of the traits raised up a bit (swiftness, might and endurance gain on dodge as a thief? Yes please) before I can judge them.....but so far I don't feel like any of the melee primary classes (most notably warrior and thief, as I do not like guardian) are tanky enough to fight in melee against normal enemies. Also, the level scaling can get kind of annoying.....if you are travelling somewhere you have to be careful about what you run through because it might kick your butt due to the level down scaling. I like the concept, I just think it makes it too much of a hassle to travel around and enjoy the scenery that you missed at a low level.

I don't know....maybe it's because you haven't gotten many levels? Warrior was ez mode up until around 10 (currently at 12), only had to use my heal once or twice. But now it seems if I fight more than 1 enemy at a time I need to really pay attention and sometimes use my heal.

In open area's, thief with a shortbow has much higher survivability than I've ever had on my warrior (though I haven't played Rifle/longbow warrior much), and in melee, warrior feels just as squishy as my thief.

I can't say much though, my highest level is 13 or so, and I really need to get some of the traits raised up a bit (swiftness, might and endurance gain on dodge as a thief? Yes please) before I can judge them.....but so far I don't feel like any of the melee primary classes (most notably warrior and thief, as I do not like guardian) are tanky enough to fight in melee against normal enemies. Also, the level scaling can get kind of annoying.....if you are travelling somewhere you have to be careful about what you run through because it might kick your butt due to the level down scaling. I like the concept, I just think it makes it too much of a hassle to travel around and enjoy the scenery that you missed at a low level.

In bwe1 it was the exact opposite. I got my warrior to level 18 in that event and it got easier to kill and survive as I got higher. He was extremely squishy in de's where more than 5 or 6 other people were present.

But like I said, since we have no patch notes I don't know if that's just my perception or if they have actually adjusted armor damage mitigation or they have balanced mob damage in dynamic events.

I wish they would release patch notes between the betas and stress tests. :s

I've wanted this for so long. Given there can be anywhere from 100-250 new revisions(i've been keeping track) between most events it's kinda annoying not having any idea what they've changed between events outside of the utterly obvious things.

Has anyone check this?

http://guildwars2.pl/signatures,a657

Not bad, might use this so I actually have a signature.....though I don't think I want my character names that easily findable (my GW1 account got hacked awhile ago.....after they started requiring character names to log in, and I only had my character names in a small number of places). It's a shame it auto-formats the name you input to something that would actually work in GW2....tried putting in [REDACTED] as a way to hide the name field, but it reformatted it as: Redacted Probably won't use it, but I like the customization the generator offers.

Speaking of security. I find it odd that they are only requiring a password to log into the game when they had issues with that in GW1. They made it so we had to know a characters name on the account to log into it.

Maybe that will change at launch?

I'm fairly certain they'll add in the character thing after a week or two. Kinda hard to do on launch when no one has any characters :p There's also a more serious point about how some players who use random names for characters don't necessarily remember them properly until they've spent a fair chunk of time playing with them.

I'm fairly certain they'll add in the character thing after a week or two. Kinda hard to do on launch when no one has any characters :p There's also a more serious point about how some players who use random names for characters don't necessarily remember them properly until they've spent a fair chunk of time playing with them.

Nah, just run a check, if the account has no characters, do not require a character name. Otherwise, how would people just buying the game 3 months from now log in for the first time when their account has no characters?

As far as security goes, I hope they add the security token option, similar to what Blizzard has available. I like the fact that even if someone knows my password, they won't get in without my security token.

The character method is nice and all, but if someone got into Arenanet servers they would have all your character names and encrypted password. With security tokens they would get your token seed, but wouldn't know exactly how the security token values are calculated (unless they also got a hold of the authentication servers and reverse engineered the login methods that contain the token calculations).

This topic is now closed to further replies.
  • Posts

    • Microsoft released Windows 11 KB5094149 / KB5095971 / KB5094156 Setup, Recovery updates by Sayan Sen Earlier this week Microsoft released its newest Patch Tuesday updates (KB5094126 / KB5093998 on Windows 11 and KB5094127 on Windows 10). Alongside those, Microsoft also released new dynamic updates. These Dynamic Update packages are meant to be applied to existing Windows images prior to their deployment. Dynamic Updates also help preserve Language Pack (LP) and Features on Demand (FODs) content during the upgrade process. VBScript, for example, is currently an FOD on Windows 11 24H2. This time both recovery and setup updates were released for Windows 11 as well as Windows 10. The company writes: "KB5095185: Safe OS Dynamic Update for Windows 11, version 26H1: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.28000.2269. KB5094149: Safe OS Dynamic Update for Windows 11, versions 24H2 and 25H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.26100.8655 KB5095971: Setup Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to Windows setup binaries or any files that setup uses for feature updates in Windows 11, version 23H2. KB5094156: Safe OS Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.22621.7219 KB5098815: Windows Recovery Environment update for Windows 10, version 21H2 and 22H2: June 9, 2026 This update automatically applies Safe OS Dynamic Update (KB5094154) to the Windows Recovery Environment (WinRE) on a running PC. The update installs improvements to Windows recovery features. KB5094154: Safe OS Dynamic Update for Windows 10, versions 21H2 and 22H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.19041.7417. KB5094153: Safe OS Dynamic Update for Windows 10, version 1809 and Windows Server 2019: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.17763.8880. KB5094152: Safe OS Dynamic Update for Windows 10, version 1607 and Windows Server 2016: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.14393.9234." Microsoft notes that both the Recovery and Setup updates will be downloaded and installed automatically via the Windows Update channel.
    • Quantum Error Correction Validated in Nature: Microsoft and Quantinuum Log 800-Fold Improvement Two years after the original press-release announcement, independently peer-reviewed results published in Nature on June 10, 2026, have confirmed that Microsoft and Quantinuum achieved an 800-fold reduction in quantum error rates on real trapped-ion hardware — the largest gap between physical and logical error rates ever independently validated.    What Quantum Error Correction Actually Does — and Why Breaking Even Is Hard https://www.techtimes.com/articles/318329/20260613/quantum-error-correction-validated-nature-microsoft-quantinuum-log-800-fold-improvement.htm   Quantum Computing Wiring Bottleneck Cracked by HKU Silicon Carbide Chip at Qubit Temperature Engineers at the University of Hong Kong have built the first cryogenic control chip that operates at the same temperature as superconducting qubits — 10 millikelvin, or just one-hundredth of a degree above absolute zero — without generating the heat that has forced every competing approach to park its electronics hundreds of meters of cable away. https://www.techtimes.com/articles/318325/20260613/quantum-computing-wiring-bottleneck-cracked-hku-silicon-carbide-chip-qubit-temperature.htm  
    • RevPDF 4.5.0 by Razvan Serea RevPDF is a free, fully offline PDF editor for Windows, macOS, and Linux that lets you edit text and images directly inside PDF files — no internet connection, no account, and no cloud uploads required. Unlike bloated alternatives that demand subscriptions and constant connectivity, RevPDF fits in under 60MB on desktop while delivering a complete editing toolkit: annotate, redact, sign, compress, split, merge, convert, and reorganize pages, all processed locally on your device. Smart font matching ensures edited text blends seamlessly with the original, and multi-language support includes RTL scripts such as Arabic and Hebrew. Where most PDF editors force you to choose between features and simplicity, RevPDF manages both. You can build interactive forms from scratch with text fields, checkboxes, and dropdowns, permanently redact sensitive data before sharing, draw freehand on contracts and diagrams, and add custom watermarks — all without a single file leaving your machine. Edit Text and Images Directly Inside PDFs RevPDF supports true inline PDF editing — not just annotation layers on top of a document, but actual modification of existing text and images within the file. A smart font-matching engine identifies the font used in the original document and applies it automatically when you make edits, so changes blend naturally with the surrounding content. You can reposition elements, resize images, and update text across single pages or entire documents. RevPDF 4.5.0 release notes: This is one of the biggest updates to RevPDF yet. A lot of things people have been asking for are finally here. New Features Auto Redaction Permanently redact sensitive text and areas from your PDFs before sharing. Clean, irreversible, and fully offline. Comments, Links & Bookmarks Add comments for review, insert clickable links, and create bookmarks to jump around long documents without scrolling forever. Find & Replace Search across the whole document and replace text in one go. Long overdue. Split Pages Vertically or Horizontally Split any page down the middle, vertically or horizontally. Perfect for scanned books or double-page spreads. New Drawing Tools More tools for freehand drawing and markup, better for annotations, sketches, and detailed notes. Continuous Scrolling in Editor The editor now scrolls continuously through pages instead of jumping between them. Working through long documents is a lot smoother now. PDF Metadata Editor View and edit the metadata stored inside your PDFs, including title, author, subject, and keywords. Better Font Matching Text edits now blend in more naturally by doing a better job of matching the original font. Tabbed PDF Viewer Open multiple PDFs at once in tabs and switch between them without going back to the home screen. Add Links Insert hyperlinks anywhere in your PDF, to external URLs or to other pages within the document. Share & Print Shortcuts Share or print directly from the editing screen, home screen, and viewer. No extra steps. Minor Updates Paste images directly from clipboard into your PDF New image editing tools for more control over images inside documents Bug Fixes Fixed file saving issues on Windows and Linux Everything still works fully offline. No login, no cloud, no account. Your files stay on your device. Download: RevPDF 4.5.0 | 58.0 MB (Open Source) Links: RevPDF Home Page | Github | Screenshots 1 | 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Interesting. I'm not using a VPN with my phone. I tried though my home internet (Rogers) and my cellular internet (Telus) using their respective DNS servers and both trigger the dialog above.
    • Three days after Anthropic launched Claude Fable 5 as the most capable AI model it had ever released to the public, the United States government ordered it switched off — and now the company is refunding customers who paid to use a product that vanished almost overnight https://www.techtimes.com/articles/318342/20260613/us-government-pulls-anthropics-fable-5-offline-now-come-refunds-vanished-ai.htm  
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!