Recommended Posts

^ i still don't get how you have such difficulty living in heavy armor when i was staying alive just fine on a low level dual 1h sword mesmer.

I don't either.....it just seems like I take way too much damage. I can only dodge twice without waiting for endurance, which is no problem against 1 enemy (them taking me down 1v1 to the amounts I listed was just facetanking them, not with dodging and all), but when you have 2-3 enemies hitting you at once, they generally take me down really quickly no matter what class I play.....can't dodge 2-3 attacks per second when you only get 1 dodge every 5-10 seconds. I just don't understand why dodge plays such a huge roll in damage reduction while armor does not (at least not in my experience). I'm tempted to build a tanky warrior just so I don't leave town in my paper armor.

I don't either.....it just seems like I take way too much damage. I can only dodge twice without waiting for endurance, which is no problem against 1 enemy (them taking me down 1v1 to the amounts I listed was just facetanking them, not with dodging and all), but when you have 2-3 enemies hitting you at once, they generally take me down really quickly no matter what class I play.....can't dodge 2-3 attacks per second when you only get 1 dodge every 5-10 seconds. I just don't understand why dodge plays such a huge roll in damage reduction while armor does not (at least not in my experience). I'm tempted to build a tanky warrior just so I don't leave town in my paper armor.

I had a slightly different experience with melee today. I played a warrior for a bit and never had to use my heal once through the entire starting tutorial. Last time I did the same thing and had to use it fairly often. I don't know if I've just gotten more used to the game mechanics or if they've actually adjusted the mitigation of heavy armor though.

I wish they would release patch notes between the betas and stress tests. :s

So... tomorrow?

"We will be conducting a Stress Test on Friday, August 10 from 4:00 PM PACIFIC Time to 8:00 PM PACIFIC Time."

Interesting that they are doing another one back to back. They must not have nailed down what they were after today.

I wish they would release patch notes between the betas and stress tests. :s

Interesting that they are doing another one back to back. They must not have nailed down what they were after today.

If they did that, they'd be wasting so much time given how much stuff they're updating... :pinch:

This was the message they left on Facebook:

REMEMBER: We will be actively working on the game during the event, so you might experience connectivity problems or discover features that are not working as designed. Any issues you experience are a result of the rigorous conditions of the stress test, and are in no way representative of the state of the game at launch. By participating in this stress test, you?re helping us make Guild Wars 2 a better game. Thanks for your cooperation?we?ll see you in-game!

Additional notes:

* Stress Tests are open to those who have PRE-PURCHASED the game.

* Characters will not be wiped for tomorrow's Stress Test.

---

Looks like they aren't screwing around at all. It's cool seeing how hard they're working in preparation to all this. I really hope all their work results in a great payoff. No MMO has had a smooth launch really, so it'd really be interesting to see if they could pull it off. If not, I'll forgive them still but it'd be a pretty damn awesome feat to pull off. :D

If they did that, they'd be wasting so much time given how much stuff they're updating... :pinch:

I really doubt. I'm sure they have a list of things they change from day to day. It wouldn't take much for them to have an intern summarize the notes once a week.

I really doubt. I'm sure they have a list of things they change from day to day. It wouldn't take much for them to have an intern summarize the notes once a week.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

So... tomorrow?

"We will be conducting a Stress Test on Friday, August 10 from 4:00 PM PACIFIC Time to 8:00 PM PACIFIC Time."

Oh one I may actually get to participate in.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

I really doubt that they would have to go out of their way to create a short list summarizing the changes they make. They have to have a list anyways because they can't just change things randomly. It's all got to be documented somehow. Having one unimportant employee take an hour every week to summarize (not a full detailed change log) wouldn't require much on their part. The only reason I can think of that they wouldn't put out a change log at this point is because they are making changes to things they don't want people to know about before the launch of the game, and I can understand that I guess.

Still, my point was that it would be nice to know if they did in fact change things like armor mitigation so we can do more than speculate. Mostly I just want to know about the balance changes.

And the downloading between zones in GW1 was because you didn't have everything downloaded for your game. It downloads files as you go. If you wanted to you could start playing Guild Wars 1 after only downloading relatively little files. You'd just have to download the content of each new area as you progressed. When GW1 first came out I had a friend who was still sadly on a 56k modem and we experienced that quite a few times. It was even more common when they have their annual holiday events as well, because those made a lot of changes to zones for those events.

If you want to get 100% of the game files downloaded you need to put "-image" in the target area of the properties for the shortcut to your game. That works for GW2, as well.

It's definitely at a better time for you Americans this time around, very late for us (not that I'm complaining :laugh:). Glad to see them working hard trying to make improvements before the early start/launch as well. Personally, I only want to check out the crafting system during these stress tests now and try to figure out the most efficient use of resources.

Except they're making so many changes on a day to day basis, it'd be downright annoying. Hell, they've made updates during the BWEs and stress tests while they're live. I'd rather them just stay focused with it all and worry about notifying us about updates once they're actually live.

Speaking of which, how often did they update people on Guild Wars? I recall just seeing updates as you loaded to certain zones, but I don't recall if they listed all the changes on their site back then.

They did have the change log on the Guild Wars site and on the wiki that you could look through to see what they had changed but it would usually take a couple of hours to a few days to get that information posted up, that being said, there were small updates being done every couple of days back from what I remember. (And I mean Client changes when you launch, not the files downloaded during zone changing/loading)

As seen here: http://www.guildwars...tes/default.php

I imagine they will do the same for Guild Wars 2, as you say, they need documentation to show the changes otherwise people will start to complain about "ninja nerfs". :rofl:

- Alera :shiftyninja:

I really doubt that they would have to go out of their way to create a short list summarizing the changes they make. They have to have a list anyways because they can't just change things randomly. It's all got to be documented somehow. Having one unimportant employee take an hour every week to summarize (not a full detailed change log) wouldn't require much on their part. The only reason I can think of that they wouldn't put out a change log at this point is because they are making changes to things they don't want people to know about before the launch of the game, and I can understand that I guess.

Still, my point was that it would be nice to know if they did in fact change things like armor mitigation so we can do more than speculate. Mostly I just want to know about the balance changes.

And the downloading between zones in GW1 was because you didn't have everything downloaded for your game. It downloads files as you go. If you wanted to you could start playing Guild Wars 1 after only downloading relatively little files. You'd just have to download the content of each new area as you progressed. When GW1 first came out I had a friend who was still sadly on a 56k modem and we experienced that quite a few times. It was even more common when they have their annual holiday events as well, because those made a lot of changes to zones for those events.

If you want to get 100% of the game files downloaded you need to put "-image" in the target area of the properties for the shortcut to your game. That works for GW2, as well.

I guess man. Blizzard was having issues alone keeping up with their change logs for their betas. I'm not saying they don't have them, but to compile a list from what each developer has modified into a clear and concise format for the community to read with changes that will likely be irrelevant as soon as they're out the door is what I'm talking about. It'd just be an utter waste of time really, and judging by the pace of things at Arenanet, I don't blame them in the least.

I guess man. Blizzard was having issues alone keeping up with their change logs for their betas. I'm not saying they don't have them, but to compile a list from what each developer has modified into a clear and concise format for the community to read with changes that will likely be irrelevant as soon as they're out the door is what I'm talking about. It'd just be an utter waste of time really, and judging by the pace of things at Arenanet, I don't blame them in the least.

I understand that, but I wasn't suggesting they detail every single change they made. Just a short summary like "adjusted heavy armor damage mitigation(speculation)" and "added functionality to the minimap and changed its design". Things like that, I don't think it would be to hard to do and would cut down on a lot of speculation so people could actually say for certain if something is better or worse or just their imagination.

If you didn't know better you would never know that for example, they disabled the ability to resize the UI in bwe3 and the last 2 stress tests because it was causing issues. The only reason you would know something was up with it is if you tried to use the resize option and found out that it didn't work no matter what size you set it to.

On the other hand the stress tests aren't about getting feedback, so I suppose you have a point there.

I had a slightly different experience with melee today. I played a warrior for a bit and never had to use my heal once through the entire starting tutorial. Last time I did the same thing and had to use it fairly often. I don't know if I've just gotten more used to the game mechanics or if they've actually adjusted the mitigation of heavy armor though.

I don't know....maybe it's because you haven't gotten many levels? Warrior was ez mode up until around 10 (currently at 12), only had to use my heal once or twice. But now it seems if I fight more than 1 enemy at a time I need to really pay attention and sometimes use my heal.

In open area's, thief with a shortbow has much higher survivability than I've ever had on my warrior (though I haven't played Rifle/longbow warrior much), and in melee, warrior feels just as squishy as my thief.

I can't say much though, my highest level is 13 or so, and I really need to get some of the traits raised up a bit (swiftness, might and endurance gain on dodge as a thief? Yes please) before I can judge them.....but so far I don't feel like any of the melee primary classes (most notably warrior and thief, as I do not like guardian) are tanky enough to fight in melee against normal enemies. Also, the level scaling can get kind of annoying.....if you are travelling somewhere you have to be careful about what you run through because it might kick your butt due to the level down scaling. I like the concept, I just think it makes it too much of a hassle to travel around and enjoy the scenery that you missed at a low level.

I don't know....maybe it's because you haven't gotten many levels? Warrior was ez mode up until around 10 (currently at 12), only had to use my heal once or twice. But now it seems if I fight more than 1 enemy at a time I need to really pay attention and sometimes use my heal.

In open area's, thief with a shortbow has much higher survivability than I've ever had on my warrior (though I haven't played Rifle/longbow warrior much), and in melee, warrior feels just as squishy as my thief.

I can't say much though, my highest level is 13 or so, and I really need to get some of the traits raised up a bit (swiftness, might and endurance gain on dodge as a thief? Yes please) before I can judge them.....but so far I don't feel like any of the melee primary classes (most notably warrior and thief, as I do not like guardian) are tanky enough to fight in melee against normal enemies. Also, the level scaling can get kind of annoying.....if you are travelling somewhere you have to be careful about what you run through because it might kick your butt due to the level down scaling. I like the concept, I just think it makes it too much of a hassle to travel around and enjoy the scenery that you missed at a low level.

In bwe1 it was the exact opposite. I got my warrior to level 18 in that event and it got easier to kill and survive as I got higher. He was extremely squishy in de's where more than 5 or 6 other people were present.

But like I said, since we have no patch notes I don't know if that's just my perception or if they have actually adjusted armor damage mitigation or they have balanced mob damage in dynamic events.

I wish they would release patch notes between the betas and stress tests. :s

I've wanted this for so long. Given there can be anywhere from 100-250 new revisions(i've been keeping track) between most events it's kinda annoying not having any idea what they've changed between events outside of the utterly obvious things.

Has anyone check this?

http://guildwars2.pl/signatures,a657

Not bad, might use this so I actually have a signature.....though I don't think I want my character names that easily findable (my GW1 account got hacked awhile ago.....after they started requiring character names to log in, and I only had my character names in a small number of places). It's a shame it auto-formats the name you input to something that would actually work in GW2....tried putting in [REDACTED] as a way to hide the name field, but it reformatted it as: Redacted Probably won't use it, but I like the customization the generator offers.

Speaking of security. I find it odd that they are only requiring a password to log into the game when they had issues with that in GW1. They made it so we had to know a characters name on the account to log into it.

Maybe that will change at launch?

I'm fairly certain they'll add in the character thing after a week or two. Kinda hard to do on launch when no one has any characters :p There's also a more serious point about how some players who use random names for characters don't necessarily remember them properly until they've spent a fair chunk of time playing with them.

I'm fairly certain they'll add in the character thing after a week or two. Kinda hard to do on launch when no one has any characters :p There's also a more serious point about how some players who use random names for characters don't necessarily remember them properly until they've spent a fair chunk of time playing with them.

Nah, just run a check, if the account has no characters, do not require a character name. Otherwise, how would people just buying the game 3 months from now log in for the first time when their account has no characters?

As far as security goes, I hope they add the security token option, similar to what Blizzard has available. I like the fact that even if someone knows my password, they won't get in without my security token.

The character method is nice and all, but if someone got into Arenanet servers they would have all your character names and encrypted password. With security tokens they would get your token seed, but wouldn't know exactly how the security token values are calculated (unless they also got a hold of the authentication servers and reverse engineered the login methods that contain the token calculations).

This topic is now closed to further replies.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!