[OSx86] How to install 10.6 (Intel) next to Windows 7?


Recommended Posts

... which is a Hackintosh, as opposed to a genuine Apple Macintosh.

Yea thats what he is doing

---

I have a disc to try out from one of my awesome friends, of Mac OS X 10.6 Intel version. After looking online it appears my Asus P5K-E is supported by this version.

I don't want to lose my Windows 7 installation (on C:\ drive) but I have a 365GB partition (on the same disk) I could use?

What is the best way to go about this, anyone know?

PS: Its a legit version, not a "Hackintosh" disc or whatever. (Already searched online for some articles, but came up with varying advice!)

You didn't get what I was saying.

Hackintosh == non-Apple PC with OS X installed on it by whatever means.

Macintosh == computer manufactured by and bought from Apple Inc.

Clear now?

You didn't get what I was saying.

Hackintosh == non-Apple PC with OS X installed on it by whatever means.

Macintosh == computer manufactured by and bought from Apple Inc.

Clear now?

lol Yea i know that - but I asked about the F8 thing, and you said it only applies to Hackintosh computers

and as he is installing OSX on a PC - then the F8 would be correct no?

When you get the Chamleon screen press any button and the scroll bar will stop allowing you to put the -v -x commands in, It doesn't give you a prompt but if you start typing it will show up at the bottom. Then press enter.

To get into OS X 'single user mode' you have to press Cmd+S at the OS X bootscreen. On a Hackintosh that translates to Winkey+S (I think).

This wouldn't work as most users have to use a bootloader Chameleon for example rather than the Mac bootloader

Good job Spidey ...... so you updated the snow leopard to 10.6.4 yet ?

Neobond hasn't managed to get the 10.6.4 update working yet. Keeps throwing a bad error (kills the installation). I'm working with him to get it running with 10.6.4. :)

EDIT: Managed to get 10.6.4 update installed finally. Now for the extra updates! Wish him luck!

Best of luck Spidey ........... DO NOT ENABLE THE NATIVE NTFS READ/WRITE ON SNOW LEOPARD. It will make minced meat out of your other partitions.

BTW, did Spidey reformat his entire HDD to match the GUID partition table of Snow Leopard or did he install from a USB stick (with changed files) to allow installation on a MBR partition table.

Best of luck Spidey ........... DO NOT ENABLE THE NATIVE NTFS READ/WRITE ON SNOW LEOPARD. It will make minced meat out of your other partitions.

BTW, did Spidey reformat his entire HDD to match the GUID partition table of Snow Leopard or did he install from a USB stick (with changed files) to allow installation on a MBR partition table.

How he accomplished the installation is up to him to disclose. Sorry.

As for NTFS R/W support, its gotten better in 10.6.4 compared to 10.6.0. 10.6.0 killed my windows partition but I can use it in 10.6.4 with no issues. :)

How he accomplished the installation is up to him to disclose. Sorry.

As for NTFS R/W support, its gotten better in 10.6.4 compared to 10.6.0. 10.6.0 killed my windows partition but I can use it in 10.6.4 with no issues. :)

I tried the native NTFS R/W support on my 10.6.4 & i used to get a lot of Disk Checks on my reboots to the windows Partition. I also copied some files over to the NTFS drive from the HFS drive & to my bad luck they all turned out to be corrupt after the reboot. So i would tread carefully on that turf if i were you.

I tried the native NTFS R/W support on my 10.6.4 & i used to get a lot of Disk Checks on my reboots to the windows Partition. I also copied some files over to the NTFS drive from the HFS drive & to my bad luck they all turned out to be corrupt after the reboot. So i would tread carefully on that turf if i were you.

Different hardware, different setups, different results. It could be a number of things that could cause that, especially on a 'Hackintosh' that has flakey chipset support.

Different hardware, different setups, different results. It could be a number of things that could cause that, especially on a 'Hackintosh' that has flakey chipset support.

Agreed, nothing beats a REAL Mac though.

I'm pretty amazed to see people are willing to go through this much trouble every time a system update is released. I think I'd rather use Windows instead. :laugh:

After a couple of installs its nice and easy to get up and running.

Can you install system updates (security, Safari, "service packs" etc.) straight from Software Update?

Direct updates from Software Update work fine as long as you do not use a custom kernel. Meaning all AMD machines will likely have a dead install after using it (unless you know how to use the command line).

Most Intel machines that can use a vanilla kernel will work flawlessly (this is my personal opinion, not fact).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!