My New Twin Lovely Ladies


Recommended Posts

So what motherboard do you have there?

Are they both running in full PCI-X X16?

Truly and sincerely, thanks so much for asking this!! When I saw treemonsters response about it only being 16x/8x, I thought that did not sound right, as I remembered one of the main reasons I purchased this mobo was because of 16x/16x support. So I got out my manual, and SURE ENOUGH I had the cards installed in the wrong slots!!!

word of warning wthe fpb, some people have been having issues with it, such as bsods, etc. not sure what the factors are, but for you withte sc cards it will only unlock fanspeed to 100%(from 80%)

and evga is definitely full of surprises.

if he has the 758(liek mine) one is 16x, one is 8x, which with these cards should not affect performance at all.

So here it is for you, I scanned the page of the manual. I had the cards in Slots 1 & 5, and sure enough that meant I was only getting 16x/8x

PCI-E_SLOTS.jpg

I just moved the second card into Slot 3, and although it was a tad tight, it fit no problem at all!!

Was a bit of weirdness when I restarted the system, but all I had to do was restart a second time, and it is all back to normal.

So yeah treemonster, you may want to look into that, and see if you can install your cards into Slots 1 & 3.

Thanks again wombatt, I truly may have never realized this if you did not ask. (Y)

Nice one DL. I don't care much for Nvidia, but you did alright for yourself. Enjoy (Y)

Thanks. :yes:

Actually EDIT - I do see what they say about for improved airflow use slots 1 & 5, so should I move them back???

So I just checked the temps, and the top card is running 4 degrees hotter then the bottom, so I may live with them for now in Slots 1&3, as I would think it is better to have 16x/16x if one can have it, no?

Actually EDIT - I do see what they say about for improved airflow use slots 1 & 5, so should I move them back???

Just keep an eye on your temps while gaming for a little while. I have my cards in slots 1 and 3 and the top card gets very little air to it since the other card is right up against it. So far it's been alright with just having the fan on the top card set a bit higher than the other. If you do have to use slots 1 and 5, don't worry, you won't really see a decrease in performance (maybe a couple fps). Just try it out for a little bit.

So I googled it, I am moving it back to Slot 5 :laugh: The difference is like 1.1 FPS, would rather have better air flow for sure. Be back in a few. :rofl:

yep i have my cards in slot 1/3 for best air flow. it's a bit trickey for newbies coming to this mobo especially from the nforce days of x16/x16/x16. in the end it really make very little (no) practical

difference.wait... i see what you were tring to say, by that diagram i have my cards in slots 1 and 5. it's been a while since i talked about this particular issue. :p for my purpose 16x8x is fine.

you can also think of it as pcie slots 1/2/3 where it equals 1/3/5 in teh diagram in the manual. basically for pcie slot 1/2 your video cards should be flush. assuming you have the 3x sli (758) board.

i've said this else where, but the difference between 8x and 16x with a 480 is 2% or like 1fps at most(according to real world testing from evga forum posters)

any configuration should be fine for your 460s.

yep i have my cards in slot 1/3 for best air flow. it's a bit trickey for newbies coming to this mobo especially from the nforce days of x16/x16/x16. in the end it really make very little (no) practical

difference.wait... i see what you were tring to say, by that diagram i have my cards in slots 1 and 5. it's been a while since i talked about this particular issue. :p for my purpose 16x8x is fine.

you can also think of it as pcie slots 1/2/3 where it equals 1/3/5 in teh diagram in the manual. basically for pcie slot 1/2 your video cards should be flush. assuming you have the 3x sli (758) board.

i've said this else where, but the difference between 8x and 16x with a 480 is 2% or like 1fps at most(according to real world testing from evga forum posters)

any configuration should be fine for your 460s.

Yep, I should have just listened to you to begin with. :laugh:

Sure enough when I moved it back to Slot 5, I had the damn RAM issue only reading 4GB. I tried resetting it, only 4 GB, finally I reset it again, and it is back up to 6. I am OFFICIALLY DONE moving around components. :laugh:

Because I am an idiot, I have yet to download any of the benchmark stuff, I did install the Performance Boost thing from EVGA and then the SLi update from them as well, but probably will not even get a chance until tomorrow to play around with anything as it is now the nighttime and the wife wants to watch a movie, etc.

Thanks again for all your help, especially since I am totally new to the SLi world, it is truly much appreciated. (Y)

Truly and sincerely, thanks so much for asking this!!

-

Thanks again wombatt, I truly may have never realized this if you did not ask. (Y)

Ahh, no problem. That's why you came here right? :)

I was just interested because my motherboard unfortunately only has 1 full X16 Slot, The other is locked into X2 Mode...

So I can't do a SLI or Crossfire setup! :(

Ahh, no problem. That's why you came here right? :)

I was just interested because my motherboard unfortunately only has 1 full X16 Slot, The other is locked into X2 Mode...

So I can't do a SLI or Crossfire setup! :(

Indeed, it is why I come here! And funny you mention that (why I came here) as this thread got me thinking, my 7 years as a member is this month on the 30th, and the reason I joined is I had built my first custom PC for gaming and I had a ton of questions. So just kind of interesting how things have gone full circle so to speak, and I am back in the Hardware Hangout, where it all began for me. :yes: It reminds me of the good old days. Sorry to hear about you not being about to SLi or Crossfire. I still have not had any time yet to see how good these suckers are.

Awesome purchase, DL. Those two video cards are cheaper (and faster) than a single GeForce GTX 480. (Y)

Thanks man. That is exactly why I got them. (Y) This article from Toms Hardware really, really convinced me.

Clean your turbine homey. :laugh:

:laugh: All these pics were taken before I did any cleaning. Once everything was in, I did a full cleaning, and was amazed at how much that came out as it really was not that bad to begin with.

:laugh: All these pics were taken before I did any cleaning. Once everything was in, I did a full cleaning, and was amazed at how much that came out as it really was not that bad to begin with.

Its ok, we all know you were giddy like a school girl to get them in.

I got 1x of the same evga you have, and I was too :laugh:

congrats I guess. How does it feel to know they will be outdated by next year?

that's pretty much true of any pc hardware more or less.

but my 8800 gts 512 was playing dx9 games(the vast majority of releases in that time) at max settings and very good fps right up until i upgraded my new pc.

the only future proof risk is if dx11 really takes off and we see alot of demanding games like metro2033 come out, that raise the stakes even further.

but if history repeats these cards will be great for the next 2-3+ years easily.

hell if you look at the steam hardware survey, iirc there are still tonnes of people using 7900s or even 6800s or their ati equivalents.

for the last few years hardware performance has for the most part really outstripped software(games) demands.

Just out of interest, if one of the ports was running in X2, would he notice performance loss then?

yup

he would

there was a thread on ocfourms.com a while ago where someone tested xfire 4870s on like P35, P45 and think it was X58 mobos

P35 runs xfire in x4/x8, P45 does x8/x8 and X58 does x16/x16

and there was a noticeable drop in the FPS on the P35

congrats I guess. How does it feel to know they will be outdated by next year?

:rofl: It feels great if you could not tell by the 5 pages in this thread. And next year? They were outdated when they were released, everyone knows that about technology, but I guess you felt the need to remind me to make yourself feel better? So sorry about that, but hey if it floats your boat, keep it up. :laugh:

that's pretty much true of any pc hardware more or less.

but my 8800 gts 512 was playing dx9 games(the vast majority of releases in that time) at max settings and very good fps right up until i upgraded my new pc.

the only future proof risk is if dx11 really takes off and we see alot of demanding games like metro2033 come out, that raise the stakes even further.

but if history repeats these cards will be great for the next 2-3+ years easily.

hell if you look at the steam hardware survey, iirc there are still tonnes of people using 7900s or even 6800s or their ati equivalents.

for the last few years hardware performance has for the most part really outstripped software(games) demands.

Well said. Although I am usually against it, in this case this is extremely good food for the troll. (Y)

So I have not gotten to run any benchmarks yet, but I was able to do my first informal "real world" game test, and all I can say is DAMN. Really happy with the results.

I fired up BFBC2. I used to run it at all settings Medium, 4x AA, and 4x AF, and HBAO completely turned off. At 1920 x 1080. I ran these settings because in an online FPS, I always preferred a bit more FPS. So at these mostly medium settings, I used to average around 70 FPS, but it didnt look all that great. Not bad, but not great.

So just for fun, as soon as I opened up the Advance graphic settings, i set everything as High is it could be. AA at 32x, AF at 16x, and for the first time ever, HBAO on. Whenever I put HBAO on with my older card, it would cause such significant frame loss it was not even funny. It literally was not even an option. So maxing out everything, I thought for sure I was gonna then have to scale a few settings back, and lo and behold, I did not have to touch a single setting. I was getting anywhere between 60-85 FPS, all was really dependent on the action going on screen. The lowest I saw it go was 45 FPS, and that was in the tank and a ton going on, and even still, 45 FPS for everything literrally maxed out, is more than liveable, especially when the average was around 70. This was just me watching the FPS while having FRAPS running, but I will do a more formal test and have FRAPS do an actual benchmark, but this is the exact reason I got these cards, so I could not be any happier. It literally looked like the screenshots you see for promotion, but it was playing beautifully. That is absolutely a beautiful thing. :yes:

very nice, i was looking @ getting 2 of those puppies. But i wanna know if i should get the a x16 or x8 PCIe Slot board. @ the moment im still on 775 CPU and planning i5/i7 CPU for xmas...

Grab a x16, then you'll be future proofed, and wont feel as sad as I do :(

ahh I'm just a little jaded with pc gaming. Gave it up for pure console fun. Never no need to worry about upgrading my hardware to play the latest and greatest. Best decision I ever made.

Fair enough, your are entitled to your opinion, just could have gone about it a little better IMO. And just an FYI, I also own all 3 consoles, I really am just someone who likes to game on all systems, and being a bit older with a decent career, I am able to afford myself the luxury to do so. With that said, the first custom gaming PC I built, I ran with the 6800 Ultra GPU I had for almost 4 years. I did not even build a PCI-E based computer until February of last year, and PCI-E was out for quite some time, I just made due with my AGP system the best I could. My point being is, I can somewhat relate to the sentiment about computer hardware and having to keep up, but that simply does not deter me from enjoying it when I can, and the truth is I definitely do not always need the latest and greatest, it just turns out I purchased relatively new cards right now, but I do definitely plan on extending the life of these 2 cards for as long as humanly possible. So I am not one that continues to purchase new tech as it comes out. I would be absolutely broke if that was the case, so I try to make a good decision when I am able to acquire something along these lines.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!