Converting Partition from Dynamic to Basic


Recommended Posts

Hi All,

Have a Win 2K3 partition on a running partition. Bought a new 500 GB HD to install Windows 2008 server on the machine.. before could have installed W2k8, created a few partitions and moved a lot of backup to the the partitions of new hard disk in Win 2003 (leaving first of the partition unused). Now when I am trying to install Windows 2008 thru a boot disk, it says Windows 2008 can not be installed on a dynamic partition.. Tried to find out ways to convert a dynamic partition to a basic one (and found references of diskpart), but all documentation mentions that I need to delete volumes and data of the dynamic disc before converting it to a basic partition. Unfortunately the new disk has a few partitions having a lot of back up.. Now my question is.. I have four partitions on the new disk of 100, 100, 150, 125 GBs each.. where first 100 GB doesn't have any data but rest three partitions have backup data... Can I just delete first partition/volume of 100 GB of the dynamic disk to convert it to Basic disk (thru disk part).. or do I need to delete all the partitions on the dynamic disk (need to move backup then to an alternative) to convert it to a basic disk

Please help.. Thanks in Advance

P1J

Paragon partition manager will do this easily. Otherwise you can do it with free utilities by changing it on the bit level.

convert to basic is on page 3

http://www.paragon-software.com/export/sites/paragonsoftware.com/docs/PM11_Corporate_Full_Features_List.pdf

It is the only partition manager software that I know of that does this, I have used it to fixed botched servers and highly recommend keeping it in your tool bag of tricks to get you out of jams.

what you are looking for on the bit level:

"In the editor, go to the "01C0" line and the third bit should be a "42". Change that to a "07". **Note, a few machines have had this on the "01D0" line instead. I don't know what that means, so I wouldn't try it unless it is on a pure test box. ***** I assume partition 1 would be at "01C0", Partition 2 would be at "01D0", Partition 3 would be "01E0", and Partition 4 would be "01F0". I would assume that you would be required to change every partion on the drive back for this to work. However, I have not tested this. Do so at your own risk. "

paragon is point and click but it does cost 300 for the license. bit level is free, but can screw up the server much easier. take your pick. All bets are off if you are doing this with a mirrored partition (the only reason I see to have dynamic disks). You will have to break the mirror and do it with the one drive. I would even disable the other drive.

Thanks a lot..

when I change at the bit level, does it have any impact of file structure/mbr and existing content on that hard disk? Also will it cause any inconsistencies with existing windows registry etc to recognize it?

thanks again!

  On 22/09/2010 at 13:16, sc302 said:

Paragon partition manager will do this easily. Otherwise you can do it with free utilities by changing it on the bit level.

convert to basic is on page 3

http://www.paragon-software.com/export/sites/paragonsoftware.com/docs/PM11_Corporate_Full_Features_List.pdf

It is the only partition manager software that I know of that does this, I have used it to fixed botched servers and highly recommend keeping it in your tool bag of tricks to get you out of jams.

what you are looking for on the bit level:

"In the editor, go to the "01C0" line and the third bit should be a "42". Change that to a "07". **Note, a few machines have had this on the "01D0" line instead. I don't know what that means, so I wouldn't try it unless it is on a pure test box. ***** I assume partition 1 would be at "01C0", Partition 2 would be at "01D0", Partition 3 would be "01E0", and Partition 4 would be "01F0". I would assume that you would be required to change every partion on the drive back for this to work. However, I have not tested this. Do so at your own risk. "

paragon is point and click but it does cost 300 for the license. bit level is free, but can screw up the server much easier. take your pick. All bets are off if you are doing this with a mirrored partition (the only reason I see to have dynamic disks). You will have to break the mirror and do it with the one drive. I would even disable the other drive.

no sir. it should not impact the existing file structure at all or registry. it should be similar to what paragon is doing (it needs to do this outside of windows also, via a boot disk or during a reboot prior to the os fully loading and mounting the disks).

Keep in mind there is risk to doing such a thing.. Be it with a tool or changing the bit - which I have done in the past as test and works fine. But would be extra careful on a disk with production data. I would assume you have a backup?? I would never suggest anyone do such a thing without a valid backup of your critical data.

Sure it can be a time saver - but without a backup it could also be a job ender ;) If the worse case scenario happens..

  On 22/09/2010 at 15:24, BudMan said:

Keep in mind there is risk to doing such a thing.. Be it with a tool or changing the bit - which I have done in the past as test and works fine. But would be extra careful on a disk with production data. I would assume you have a backup?? I would never suggest anyone do such a thing without a valid backup of your critical data.

Sure it can be a time saver - but without a backup it could also be a job ender ;) If the worse case scenario happens..

backup should go without saying.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • People yearn for the good old days of IRC and truly open Internet, yet are dismissive of modern solutions like ActivityPub (which Mastodon pioneered) and Matrix. Make it make sense.
    • AI judges learn new tricks to fact-check and code better by Paul Hill Image via Pixabay AI researchers and developers are increasingly turning to large language models (LLMs) to evaluate the responses of other LLMs in a process known as “LLM-as-a-judge”. Unfortunately, the quality of these evaluations degrades on complex tasks like long-form factual checking, advanced coding, and math problems. Now, a new research paper published by researchers from the University of Cambridge and Apple outlines a new system that augments AI judges with external validation tools to improve their judgment quality. This system aims to overcome limitations found in both human and AI annotation. Humans face challenges and biases due to time limits, fatigue, and being influenced by writing style over factual accuracy while AI struggles with the aforementioned complex tasks. The Evaluation Agent that the researchers created is agentic so it can assess the response to determine if external tools are needed and utilizes the correct tools. For each evaluation, three main steps are passed through: initial domain assessment, tool usage, and a final decision. The fact-checking tool uses web search to verify atomic facts within a response; code execution leverages OpenAI’s code interpreter to run and verify code correctness; and math checker is a specialized version of the code execution tool for validating mathematical and arithmetic operations. If none of the tools are found to be useful for making judgments, the baseline LLM annotator is used to avoid unnecessary processing and potential performance regression on simple tasks. The system delivered notable improvements in long-form factual checking, with significant increases in agreement with ground-truth annotations across various baselines. In coding tasks, the agent-based approach significantly improved performance across all baselines. For challenging math tasks, the agents improved performance over some baselines, but not all, and overall agreement remained relatively low at around 56%. Notably, the researchers found that in long-form factual responses, the agent’s agreement with ground-truth was higher than that of human annotators. This framework is extensible, so in the future, other tools could be integrated to further improve LLM evaluation systems. The code for the framework will be made open source on Apple’s GitHub, but it isn’t up yet.
    • https://www.neowin.net/news/tags/mastodon/ In short: Federated Twitter (X)
    • Keep in mind it was purchased by an advertising company. I use SearxNG.
    • I am using Waterfox Private Search now that I started using the Waterfox browser on my PC and Android. Both work great* search waterfox net with full stops in between. * I have an issue where making comments on articles on various websites is difficult with Waterfox on Android as it randomly adds spaces and doubles up on text.
  • Recent Achievements

    • Collaborator
      fernan99 earned a badge
      Collaborator
    • Collaborator
      MikeK13 earned a badge
      Collaborator
    • One Month Later
      Alexander 001 earned a badge
      One Month Later
    • One Month Later
      Antonio Barboza earned a badge
      One Month Later
    • Week One Done
      Antonio Barboza earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      584
    2. 2
      ATLien_0
      218
    3. 3
      Michael Scrip
      170
    4. 4
      Xenon
      136
    5. 5
      +FloatingFatMan
      123
  • Tell a friend

    Love Neowin? Tell a friend!