cisco VPN client cannot connect to VPN gateway

By chuikingman
in Smart Home, Network & Security

 Share

Recommended Posts

Explorer

chuikingman

Posted
Posted

I use cisco vpn client ver 4.6 in win XP and try to connect to VPN gateway that have public IP.

My computer is connected by direct cable to a router .And this router is connected

to internet by PPPoE .

I use Cisco VPN client ver 4.6 and try to connect VPN gateway .

But It is failure.The error is 412.

But if the same computer connect to internet by PPPoE directly and the VPN client

can connect the same VPN gateway without problem .

Why do I cannot connect VPN gateway when there is router .

How can I fix it ???

Please advice .

Grand Master

Mr. Gibs

Posted
Posted

You shouldn't have to forward ports for the client to work only the server end will need the ports open.

Well he says it doesn't work if the router is plugged in. But works without the router.

That sounds like a port forwarding issue to me. Either that or uPnP or NAT is/are disabled lol.

Grand Master

+BudMan MVC

Posted
  • MVC
Posted (edited)

^ exactly can you post the model numbers of the devices between your pc and the internet, possible double nat.

Also for cisco ipsec client to work your going need vpn passthrough enabled on the router, and a double nat could cause you problems.

post-14624-12883578887389.jpg

Also 4.6 is really old client btw, should still work - but curious why have not updated the client?

I do believe 5.0.7.0410 is the lastest version of the ipsec client.

edit: Just looked and 4.8 was available in jan 2007, so 4.6 is Really OLD..

Mentor

Jesse Carlton

Posted
Posted

I would suggest using shrewsoft VPN client for Cisco IPSEC. It is much faster to connect and establish a tunnel, and you can configure split DNS and WINS client side. The only reason I wouldn't recommend it is if your company won't allow an open source client.

Back on topic though, if it connects to the VPN without your router, it's definitely your router's fault. Either the router is blocking it (no passthrough, double nat, firewall, etc), or it's giving you an IP from the same IP block that the VPN server is giving you. I've seen that happen a few times at my job where people have the same subnet as the VPN network and can't connect.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component

      By hellowalkman · Posted

      Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The quantum search for Time's origin had an equally mind-boggling conclusion

      By cleverclogs · Posted

      The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20

      By Copernic · Posted

      VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is how much iPhone 18 Pro could cost after Apple's price hike confirmed

      By +Nik Louch · Posted

      They will
    • Politically funny images of the World

      By +Nik Louch · Posted

      Too soon, I'm still not over this death!

  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!