Restore iDevices to older firmware


Recommended Posts

Apple, in all of their infinite wisdom, have decided to make it hard to downgrade iOS versions. This makes things awkward when you need to use an older version for jailbreaking or any other reasons that I can't think of. It is possible to downgrade by having SHSH blobs on Saurik's server, but you probably don't and that's why you're reading this guide. This method works by editing some of the files in the .ipsw file that contains the firmware to trick Apple's verification system into thinking that you are restoring to the current firmware.

7zip can be found here:

http://www.7-zip.org/

iPodRobot plist Editor is somewhere over here:

http://download.cnet.com/Plist-Editor/3000-18551_4-10909598.html

You can find .ipsw files here:

http://www.felixbruns.de/iPod/firmware/

Note: This has only been tested on an iPod Touch 2G because that is all I have. This does not work for 3.1.3 (for me anyway). Your mileage may vary.

Other Note:I did not think of this, I found it after updating to 4.1, not liking it and googling for a way to fix it.

Even more notes: Click the images to enlarge.

1. Download the ipsw file you will be restoring to an put it somewhere on your computer.

141280221t.png

2. Make all file extensions visible.

202664515t.png

Press the Alt key and select Tools>Folder Options...

243690625t.png

Got to the View tab and uncheck Hide extensions for known file types. Apply and close.

3.Make a new folder and copy the .ipsw into it so you have two copies with the same filename.

4. Rename the file to a .zip.

373219498t.png

Rename it changing only the extension to .zip.

324642055t.png

Because you are changing the file type you will get a warning, click Yes.

5. Open the .zip and copy the BuildManifest.plist and Restore.plist files into the folder with your .ipsw file.

717631988t.png

6. open the .plist files with iPodRobot.

714393633t.png

Find and replace the original build number with the build number of the latest firmware for your device. It should appear twice or three times in BuildManifest.plist and once in Restore.plist.

The build number is in the file name and next to the device name on the list here.

The file name should be in this format:

ipod2,1_4.0_8A293_Restore.ipsw
"device name"_"version number"_"build number"_Restore.ipsw

7. Create the modified firmware.

702630091t.png

Delete the BuildManifest.plist and Restore.plist files from the .zip file and copy in your modified .plist files in their place. Rename the zip file into an .ipsw file like in step 4.

8. Finishing.

If you prefer to hide extensions repeat step 2, checking the box.

Open iTunes and connect your iDevice shift click the Restore button and select your modified firmware. From here, continue the restore as normal.

If you get a 1394 error, you are using the wrong build number, try older build numbers, 8B117 seems to work on iPod Touch 2G (as of January 2011).

T8

Link to comment
https://www.neowin.net/forum/topic/972006-restore-idevices-to-older-firmware/
Share on other sites

I tried using the method but I keep getting a 3194 error.

I have 4.2.1 on a 4G iTouch and I'm trying to get down to 4.1. I have edited the firmware, but it doesn't seem to be tricking the apple servers.

Do I have to edit the file name to match the new firmware as well?

I guess it's no luck for 4G 4.2.1ers as of now?

I tried using the method but I keep getting a 3194 error.

I have 4.2.1 on a 4G iTouch and I'm trying to get down to 4.1. I have edited the firmware, but it doesn't seem to be tricking the apple servers.

Do I have to edit the file name to match the new firmware as well?

I guess it's no luck for 4G 4.2.1ers as of now?

3194 is the one I meant at the end of the first post. I think it means the build number you used is for an older firmware which they don't want you using anymore or its for a different device.

The latest build number for your iPod (4G) is 8C148. The example I used was for a 2G.

T8

3194 is the one I meant at the end of the first post. I think it means the build number you used is for an older firmware which they don't want you using anymore or its for a different device.

The latest build number for your iPod (4G) is 8C148. The example I used was for a 2G.

T8

I used 8C148.

It gave me 3194.

I've even tried doing it with tinyumbrella in a separate tutorial. No success.

I tried using the method but I keep getting a 3194 error.

I have 4.2.1 on a 4G iTouch and I'm trying to get down to 4.1. I have edited the firmware, but it doesn't seem to be tricking the apple servers.

Do I have to edit the file name to match the new firmware as well?

I guess it's no luck for 4G 4.2.1ers as of now?

Try TinyUmbrella, it'll "kill" the process to connecting to Apple Servers.

The build number for 4.1 worked for me but it probably won't work for restoring to 4.1. I don't know what else to suggest. Tiny umbrella won't work by itself because you need apple to verify the restore, iTunes needs to receive the "OK" message from apple or it will give you the 3194 error.

T8

I tried using the method but I keep getting a 3194 error.

I have 4.2.1 on a 4G iTouch and I'm trying to get down to 4.1. I have edited the firmware, but it doesn't seem to be tricking the apple servers.

Do I have to edit the file name to match the new firmware as well?

I guess it's no luck for 4G 4.2.1ers as of now?

Just thought, did you edit the restore.plist file too, I didn't include a picture for that one and didn't make it that clear.

I had a go at doing it for your ipod, will link to the file when it uploads so you can test it, these retina graphics make it a huge file :/

T8

it seems that if you buy an ipod 4g that already has 4.2.1 on it there is no way to downgrade it to 4.1,

not really sure what they changed but it can not be done

if you've upgraded to 4.2.1 you can downgrade back to 4.1 but not if the ipod's only had 4.2.1 for whatever reason

Just thought, did you edit the restore.plist file too, I didn't include a picture for that one and didn't make it that clear.

I had a go at doing it for your ipod, will link to the file when it uploads so you can test it, these retina graphics make it a huge file :/

T8

can you send me a link too, i'm trying to get my friends new ipod downgraded so he can jailbreak it, if it doesn't work i guess we'll just have to wait till greenpois0n's 4.2.1 jailbreak is released :/

I tried using the method but I keep getting a 3194 error.

I have 4.2.1 on a 4G iTouch and I'm trying to get down to 4.1. I have edited the firmware, but it doesn't seem to be tricking the apple servers.

Do I have to edit the file name to match the new firmware as well?

I guess it's no luck for 4G 4.2.1ers as of now?

The whole ipsw isn't going anywhere on my connection :no: but here are the files you will need to move into the ipsw replacing the existing copies.

BuildManifest.plist

Restore.plist

iPod touch 4g restoring down to 4.1 ONLY

T8

The whole ipsw isn't going anywhere on my connection :no: but here are the files you will need to move into the ipsw replacing the existing copies.

BuildManifest.plist

Restore.plist

iPod touch 4g restoring down to 4.1 ONLY

T8

you put the same link for both files

Got some good news for you, Greenpois0n has been released for iOS 4.2.1

http://lifehacker.com/5752219/greenpois0n-brings-a-long+awaited-untethered-jailbreak-to-ios-421

Tried to look in the .dmg files in the .ipsw but they're encrypted :(

T8

awesome, just in time to give the ipod back to my friend tomorrow

that was the whole reason for trying to downgrade it was so i could jailbreak it

crap, just realized it's only released for osx right now :/

if i'm lucky i'll be able to log onto one of the macs at school tomorrow and do it from there

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      578
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!