Recommended Posts

When you stop using the iPod for a few minutes it automatically goes into sleep mode. Of course, this causes my son great stress because when he wants to use it the next day it is totally dead and it needs a full charge.

So I told my son to use the on/off button on the top of the unit to turn the iPod. I have since learned that this doesn't turn the iPod off but only puts it to sleep faster (gee thanks, like that really helps!).

According to a google, you need to hold the button down until it prompts you to slide to turn it off. Is this retarded or what?

I'll try that when he is finished his session. Of course that session can't start until the unit charges. He's not happy.

Edited by Fred Derf
it --> he
Link to comment
https://www.neowin.net/forum/topic/975304-ipod-touch-battery-life/
Share on other sites

If you press the button shortly it puts it in sleep mode. If you hold it down, it prompts you to switch it off.

Personally I don't see an issue with this!

But it would go to sleep anyway if you just walked away. So it saves you a few seconds of battery life? Who really cares when it is still dead the next day?

That certainly isn't the way that I expected it to work.

I find the iPod touch (second gen) consumes quite a bit of battery for shutdown/startup cycles. It's just like shutting down and restarting a typical desktop OS, but even slower. :/ It would be a better idea to let it sleep with Airplane Mode on or something and keep the wifi radio off.

Or a better fix would be to downgrade to 3.1.x for the 2G/3G iPod touches as apparently iOS 4.x kills the battery.

But it would go to sleep anyway if you just walked away. So it saves you a few seconds of battery life? Who really cares when it is still dead the next day?

That certainly isn't the way that I expected it to work.

Depending on how old it is, the battery may be defective. It should lose 1 or maybe 2 percent of battery overnight while in sleep. If it's losing 10% or more, bring it to an Apple store and have them take a look. If the battery is defective, they'll give you a new iPod (assuming it's still under AppleCare).

The iPod nano works the same way. It's perpetually in sleep mode - but it lasts a month or more in sleep mode on a full charge. A shutdown/startup procedure takes quite a bit of time on it.

I would suppose that the iPod touch was also intended to remain in sleep mode - I've seen it take quite a while to start up and power off (conventionally). In your case, I don't know why it lasts only a day in sleep mode though (wifi?).

Going up a notch - the iPad also remains in sleep mode when not in use and it lasts quite a while. People generally don't turn it off unless they don't intend to use it for several days.

Depending on how old it is, the battery may be defective. It should lose 1 or maybe 2 percent of battery overnight while in sleep. If it's losing 10% or more, bring it to an Apple store and have them take a look. If the battery is defective, they'll give you a new iPod (assuming it's still under AppleCare).

It is less than a week old. His last session was yesterday so it was only sleeping for about 24 hours. I personally had assumed it was off.

I would suppose that the iPod touch was also intended to remain in sleep mode - I've seen it take quite a while to start up and power off (conventionally). In your case, I don't know why it lasts only a day in sleep mode though (wifi?).

Yeah, WiFi is on because he likes to access Youtube. Otherwise he's playing Angry Birds or something similar.

In total, he's getting about an hour of playtime and then 24 hours of sleep time before the battery was dead.

Definitely as others have said, if it loses more than a few percent in 'sleep' over night, then something is going on that shouldn't. I never use the 'off' mode and sometimes go at least a week without charging. I don't play games on it though, but still, it shouldn't lose 90% of it's charge over night supposedly doing nothing.

It is less than a week old. His last session was yesterday so it was only sleeping for about 24 hours. I personally had assumed it was off.

Yeah, WiFi is on because he likes to access Youtube. Otherwise he's playing Angry Birds or something similar.

In total, he's getting about an hour of playtime and then 24 hours of sleep time before the battery was dead.

It is either due to the wifi radio running even when the iPod is 'sleeping' or the battery is just defective. When the wifi is off, you should be getting around 40 hours of audio or 7 hours of video off a single charge (http://www.apple.com/ipodtouch/specs.html).

Have a look through the following also: http://ipod.about.com/od/introductiontotheipod/tp/ipod-touch-battery.htm

If it's only a week old take it to an apple store, they will either repair it there or replace it. They replaced my sisters iphone when the speaker broke.

You have to make an appointment on the apple website http://www.apple.com/ca/retail/geniusbar/

T8

Definitely as others have said, if it loses more than a few percent in 'sleep' over night, then something is going on that shouldn't. I never use the 'off' mode and sometimes go at least a week without charging. I don't play games on it though, but still, it shouldn't lose 90% of it's charge over night supposedly doing nothing.

Well, I'll try disabling WiFi and/or using Airplane mode but I have some of these features password protected so my son doesn't go app shopping without me. I don't want to see Smurfberry charges on my next credit card statement. It makes it more complicated than I had expected.

Since he is often playing games for the hour then the battery is probably half dead at the end of his session (my understanding is that the battery only lasts for two hours of gaming).

I had read that the battery had about a 500 charge life so that would mean that, at the rate we've been going, his iPod will only last a year and a half. :(

I may be a bit lost here if is not a battery defect.

Because sleep mode can last you a long while. My old iPod Touch that isn't well loved in terms of keeping a good battery life, can last a week of light music use (I mainly use it to plug into my car's auxillary) before it shows that the battery isn't full.

My question will be, when do you charge it? Because I get the feeling you only charge it when is almost dead or dead, and if say your son plays Angry Birds or any other app really, chances are it probably drained the battery (presumably you son plays a bit before sleep) and I won't really be surprised if it runs out of battery while he sleeps. If is only music use, no way it drained that much. But applications drain more battery than you expect as everything else is so battery efficient.

I may be a bit lost here if is not a battery defect.

Because sleep mode can last you a long while. My old iPod Touch that isn't well loved in terms of keeping a good battery life, can last a week of light music use (I mainly use it to plug into my car's auxillary) before it shows that the battery isn't full.

My question will be, when do you charge it? Because I get the feeling you only charge it when is almost dead or dead, and if say your son plays Angry Birds or any other app really, chances are it probably drained the battery (presumably you son plays a bit before sleep) and I won't really be surprised if it runs out of battery while he sleeps. If is only music use, no way it drained that much. But applications drain more battery than you expect as everything else is so battery efficient.

He gets a 1 hour session of Angry Birds or Plants vs Zombies and then we take it away. 24 hours later it is dead. The battery is probably only half dead when it goes to sleep.

Since configuring the unit, I have left WiFi mode enabled so he can access Youtube. He seems to find those Glozell videos hilarious.

So it is going to sleep with the WiFi still enabled. He probably can't turn WiFi on or off himself because I have a password set but I'll have to play around with this a bit.

I have only recently learned of the hold power button + slide to turn off. I may start to use this or I may explore airplane mode.

I charged it today when he asked for another session and we found it dead. I allowed him to play with it while it was still connected to the PC because it wasn't fully charged yet. Obviously, he would prefer to be able to walk around the house with it instead of using it tethered to a PC.

I still used my itouch 1st gen until November there when I got my Omnia 7. It could last around 3 days in sleep mode. Strange how the newer ones have a shorter battery life.

Although the newer ones seem to be rated for better battery life but:

1st gen 580 mA·h

3rd gen 789 mA·h

4th gen 930 mA·h

The 2nd and 3rd gen are very close to each other but their batteries are only a fraction more powerful than the 1st gen and they have a more powerful processor ad the 3rd gen has more ram.

Should do some tests to see how they all compare.

He gets a 1 hour session of Angry Birds or Plants vs Zombies and then we take it away. 24 hours later it is dead. The battery is probably only half dead when it goes to sleep.

Since configuring the unit, I have left WiFi mode enabled so he can access Youtube. He seems to find those Glozell videos hilarious.

So it is going to sleep with the WiFi still enabled. He probably can't turn WiFi on or off himself because I have a password set but I'll have to play around with this a bit.

I have only recently learned of the hold power button + slide to turn off. I may start to use this or I may explore airplane mode.

I charged it today when he asked for another session and we found it dead. I allowed him to play with it while it was still connected to the PC because it wasn't fully charged yet. Obviously, he would prefer to be able to walk around the house with it instead of using it tethered to a PC.

iPods automatically turn the WiFi off when the screen is locked, there is no setting to stop them doing this (without jailbreak). Leaving WiFi on while it is sleeping is not the problem.

T8

Turn the iPod into Airplane mode and it'll stop trying to connect to wifi, etc. Your battery will last 3-4 days. And yes, the iPod's wifi is still on when in sleep mode. try loading a site, then hitting the hold button...then turning it back on.

Turn off "Notifications" (AKA "push" iirc) in the general settings. In the past I've read about this being a *major* power drain while in standby.

Set brightness to auto and leave it on about 1/3 or so on the slider.

I've got a ~2 year old Touch 2g 16GB and I've left it off the charger for days (perhaps up to 2 weeks) and it's not died. I often use it for an alarm clock so in that respect it's been very dependable.

I am assuming this is the 4g touch? I just bought one myself about a week ago, before you put it away for the night double tap the home button and that will display any running apps. Press the - sign to close them. Also try a app called Battery Doctor Pro, it works like a charm and has tips and a guide to maximize battery life and shows you the status of your battery. Is the iPod jailbroken by chance?

I also have a 2g touch and the battery has some wear but lasts for a pretty long time. Both are 8gb btw.

There is something wrong with your hardware. If I can play games, have 3G and WiFi enabled, text, listen to music etc. and go two days on my iPhone 3GS, theres no reason why it should be draining. Hell, if I leave it in airport mode, I've gotten 5 days without having to recharge with using it just for music.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!