TrueCrypt + Bitlocker Problem Please Help


Recommended Posts

I already tried the TrueCrypt forums but they dont seem to be that active so hopefully you guys can help...

So here's the deal. I have a 1.5TB external hard drive (with one (1) 1.5TB partition) that was/still is encrypted using Windows Bitlocker. Everything was working great. I wanted to also use TrueCrypt encryption on top of Bitlocker so I attempted to encrypt the same drive/volume with TrueCrypt. Everything was going great for the 36+ plus hours it was taking to encrypt the data, but then at 99.744% TrueCrypt gave an error of "The Media is write protected" and will not continue. Everything I try to do to fix the drive will not work.

I believe the problem is Bitlocker, while I can still unlock the drive it will not let me turn it off and gives me a "The parameter is incorrect" error when I try. As i said, I can unlock the drive, but can view the files.

As a little test I created a new partition on a separate drive of 1GB to try to replicate my findings and the the same thing happened. I turned on Bitlocker and ran the TrueCrypt encryption which errored out at ~32%. I deleted that partition and reset it up, left Bitlocker off and ran the TrueCrypt Encryption and it was successful.

So here is the question, How do I either turn off the Bitlocker so Truecrypt can finish or how do I backtrack the 99.744% that TrueCrypt already finished so I save the data and start from scratch?

I am running Windows 7 x64 if that matters.

If i can provide further details just let me know.

Any help would be greatly appreciated.

"I wanted to also use TrueCrypt encryption on top of Bitlocker"

:blink: WTF???

WIPE it and restore your files from backup, since this is external drive I would assume its your backup so should be no loss.

Where did you get the idea that it would be ok to use 2 whole drive encryption methods? Using a virtual encrypted disk should be fine - but whole drive.. no its pointless for one and second how do you think it would work?

As to backing out - I don't think you can, as to finishing - again I don't think its possible.

You will clearly see on the encryption removal instructions

http://www.truecrypt.org/docs/removing-encryption

Move all files from the TrueCrypt volume to any location outside the TrueCrypt volume (note that the files will be decrypted on the fly).

WARNING: Before you continue, make sure you have selected the correct device, as all files stored on it will be lost. The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions to create a new partition on the device. After the partition is created, it will no longer be required to mount the device with TrueCrypt to be able to save or load files to/from the device.

  • 6 months later...

I badly need help. I've had a look around the internet for a while now trying to find a solution.

I recently encrypted my 1 TB Seagate HDD with BitLocker but it didn't work on XP so i removed the password and started encrypting it with TrueCrypt.

And at 62.318% it says "The media is write protected" =(

It has very important files on it which i don't want to lose... if there's ANY way to finish ecrypting and/or cancel TrueCrypt so i can access my files again, it would be much apprieciated. also, i did not make a backup of my files which i know was very stupid and foolish of me now..

So bitlocker will work on XP for read with the bitlocker reader.

But let me get this right, you started encryption of a disk that had your only copy of critical files on it??

C'mon Dude! Really??? Sorry but I would have to assume your just dicked - just start over and restore you files from your backup. What you don't have a backup of your important files you don't want to loose??

  On 05/10/2011 at 14:00, BudMan said:

So bitlocker will work on XP for read with the bitlocker reader.

But let me get this right, you started encryption of a disk that had your only copy of critical files on it??

C'mon Dude! Really??? Sorry but I would have to assume your just dicked - just start over and restore you files from your backup. What you don't have a backup of your important files you don't want to loose??

Bitlocker Reader didn't work for XP (i couldn't install it)

and i didn't back it up because i didn't have any space to back it up, because i didn't think about anything like this happening.... i guess i've lost my stuff? :cry:

Well what did you download exactly?

http://www.microsoft.com/download/en/details.aspx?id=24303

There is different downloads for XP or vista, and then again different downloads for x64 or x86

Wish I could help, but I would have to say lesson learned, I would never do on the fly encryption of a file system or other aspects of a file system like moving partitions etc where there is critical files without a backup of the files.

Takes a few minutes to create a backup. If your in a situation where you don't have space, you need to correct that!! You should ALWAYS have a backup of your critical files.

I downloaded KB970401-x86.exe, and the plan was to run it on my home pc (which runs on Win7), so i could use my HDD at my course... but it didn't work so, that's when i removed the pw for Bitlocker and tried to install TrueCrypt.

so.. are my files lost forever...?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • More Microsoft Account headaches: Office 2024 licensing bug finally gets detailed fix by Sayan Sen Microsoft often highlights the benefits of a Microsoft account (MSA) as it points out the unified access users get across devices and services like Windows, Office, OneDrive, and Xbox, which can help in synchronization of files and settings for convenience. That is also why it is a mandatory requirement during Windows 11 installs. However, there can be major problems too. For example, earlier this month, we reported on an incident wherein a Windows user was locked out of their Microsoft Account when Windows flagged their OneDrive upload activities, and apparently there was no way to recover their account. We discussed how, in such a case, users can lose all their data, especially if it's BitLocker encrypted, which is not all that unlikely on Windows 11 24H2. You can read the story in full in this article here. Meanwhile, on the topic of MSA, Microsoft has finally released a detailed step-by-step guide for fixing the Office 2024 licensing bug. The tech giant had already published an update earlier back in December last year. While that was supposed to fix the issue, the problem likely persisted for many users. For those who need a refresher, users whose Microsoft accounts held licenses for both Office 2024 and earlier editions like Office 2021. After upgrading to Office 2024, the MSA continued to display the older version. At the time, Microsoft only stated that installing the latest version of the Office 2024 app would fix the issue. This week, though, a detailed guide has been shared. The company writes: You can find the support article here on Microsoft's official website.
    • Hey Neowin folks, I’m struggling with my Samsung QLED Q80C smart TV’s Wi-Fi dropping randomly. It connects to my 5GHz network but loses signal every 20–30 minutes, interrupting streaming. Details: Device: Samsung QLED Q80C (2023 model), Tizen OS, firmware updated to latest (May 2025). Network: TP-Link Archer AX73 router, Wi-Fi 6, 5GHz band, WPA3 security. Environment: TV ~10 feet from router, no major interference (tested without microwave or cordless phones). Setup: Streaming Netflix, YouTube via built-in apps; issue persists across apps. Steps Tried: Restarted TV, router, and modem. Switched to 2.4GHz band—same issue, slower speed. Assigned static IP to TV in router settings. Reset TV network settings and reconnected. Checked router logs; no disconnect errors logged. Searched Neowin; found a 2024 thread on Wi-Fi issues but no TV-specific fixes. Expected: Stable Wi-Fi connection for uninterrupted streaming. Actual: Wi-Fi drops every 20–30 minutes, requiring manual reconnect. Has anyone faced Wi-Fi dropouts on Samsung QLED TVs or Tizen OS? Could it be a firmware bug or router setting? Any debug tips or workarounds? Thanks for any ideas!
    • I can see why you would need an AI browser
    • if you get your MSA locked and can't recover it, and if you are on win 11 24H2 that can do automatic encryption (on Home editions too), then the BitLocker key goes with that account.
  • Recent Achievements

    • Conversation Starter
      sophiaisabella32 earned a badge
      Conversation Starter
    • First Post
      Brett76 earned a badge
      First Post
    • One Year In
      78andyp earned a badge
      One Year In
    • One Month Later
      Cottonbud earned a badge
      One Month Later
    • One Month Later
      langat earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      595
    2. 2
      ATLien_0
      219
    3. 3
      Michael Scrip
      190
    4. 4
      +FloatingFatMan
      145
    5. 5
      Xenon
      135
  • Tell a friend

    Love Neowin? Tell a friend!