Mac OS X Lion to have native support for NTFS...


Recommended Posts

Microsoft released an update for XP that adds support for exFAT, I keep it on a thumb stick so I can install it on any old XP system I come across.

Thanks. I was not aware of that.

1) We already have a thread for Mac OS X Lion related news.

2) Beyond the fact Disk Utility now identifies a drive as being formatted as NTFS under the "Erase" tab there's nothing new here.

Let me be clear on point #2: As it stands now Mac OS X Lion Build 11A444d does not provide native NTFS read/write support out of the box by default.

Pointless thread really.

Never say never. Your opinion does not equal fact.

Well you can be certain that support for them will never come with the OS itself. It always makes me laugh when Windows users expect everything else to be compatible with it and other Microsoft software, but never the other way around. Whether it's running applications through wine, supporting reading/writing its file systems (NTFS), or MS Office proprietary formats. When was the last time you saw Windows running Linux elf programs, accessing Ext4/ZFS partitions, or supporting ODF out of the box. Yeah right, never, and you never will. If we're talking levels of compatibility, Windows is the least compatible OS in existence.

Well you can be certain that support for them will never come with the OS itself. It always makes me laugh when Windows users expect everything else to be compatible with it and other Microsoft software, but never the other way around. Whether it's running applications through wine, supporting reading/writing its file systems (NTFS), or MS Office proprietary formats. When was the last time you saw Windows running Linux elf programs, accessing Ext4/ZFS partitions, or supporting ODF out of the box. Yeah right, never, and you never will. If we're talking levels of compatibility, Windows is the least compatible OS in existence.

Why would Windows want to run Linux programs...

Not built in of course, and I can't comment on how well they work (never had the need) but there are ways for Windows boxes to read Ext4 and HFS.

Even the available Ext3 file system drivers were unstable at the best of times, but Ext4 support is non-existent. In fact I tried an Ext3 FS driver in Windows and it trashed my whole file system. Besides, even those unstable drivers aren't available out of the box like NTFS support is in GNU/Linux. I can't comment on OS X because I rarely use it, but it wouldn't surprise me.

Why would Windows want to run Linux programs...

Why would GNU/Linux want to run Windows programs...

Why would GNU/Linux want to run Windows programs...

Name one application which is not available for Windows but for linux, not any useless application, it should be something people really use.

Well you can be certain that support for them will never come with the OS itself. It always makes me laugh when Windows users expect everything else to be compatible with it and other Microsoft software, but never the other way around. Whether it's running applications through wine, supporting reading/writing its file systems (NTFS), or MS Office proprietary formats. When was the last time you saw Windows running Linux elf programs, accessing Ext4/ZFS partitions, or supporting ODF out of the box. Yeah right, never, and you never will. If we're talking levels of compatibility, Windows is the least compatible OS in existence.

you should update your trolling handbook...

post-62693-0-99439400-1304352712.png

Name one application which is not available for Windows but for linux, not any useless application, it should be something people really use.

GCC can be a pain to work with on Windows. Yes there are installer packages for it, but it isn't the same. That's why people end up using crap like DevC++ for college classes.

Dealing with linux development and administration is of course easier on linux than windows, but also easier with OSX because of the unix base. That's kind of important since linux is very very widely used on servers.

GCC can be a pain to work with on Windows. Yes there are installer packages for it, but it isn't the same. That's why people end up using crap like DevC++ for college classes.

its not the same, or maybe not easy as linux version, but its still available on windows, isnt it? you are right on your case, but my main point is there is no special application for linux which is not ported or available to windows, so there is no need for windows to run linux applications or need special emulator ( like Wine ) to run linux applications, they are different OS and have different use.

When you find yourself lacking any sort of intelligent rebuttal simply throw out the old "troll" accusations.

Well it was more intelligent comment then yours. it makes some sense then your nonsense post.

When Microsoft open up the NTFS format for all to use, then Apple can fully support NTFS.

do you even hear what you're saying?!? LINUX has been able to fully support NTFS for ages now, so there's no reason why Apple shouldn't be able to

  • Like 3

Well it's not really that important of a feature imho.

Yes it may make it easier for people who are using for example NTFS formatted USB drives but I can't remember the last time I personally ran into such a need, the exFAT support was considerably more important due to various cameras starting to employ it recently.

The NTFS support is pretty darn important if you use BootCamp (which a lot of Mac owners do use).

The NTFS support is pretty darn important if you use BootCamp (which a lot of Mac owners do use).

OR you could just use the HFS+ read/write driver that Boot Camp installs into Windows to share files over to your OS X partition instead of going the other way around. But I guess that makes too much sense.

do you even hear what you're saying?!? LINUX has been able to fully support NTFS for ages now, so there's no reason why Apple shouldn't be able to

Perhaps this is a difference that has more to do with licensing than it does to do with technical limitations. I don't know the logistics of it, but I'd say it's quite possible that Apple could be sued if they implemented native NTFS write without permission from Microsoft. The open source community might get away with it because they don't make money on OS sales, per say.

Well you can be certain that support for them will never come with the OS itself. It always makes me laugh when Windows users expect everything else to be compatible with it and other Microsoft software, but never the other way around. Whether it's running applications through wine, supporting reading/writing its file systems (NTFS), or MS Office proprietary formats. When was the last time you saw Windows running Linux elf programs, accessing Ext4/ZFS partitions, or supporting ODF out of the box. Yeah right, never, and you never will. If we're talking levels of compatibility, Windows is the least compatible OS in existence.

Yet surprisingly still holds the highest market share. :rolleyes:

I do not expect everyone to be compatible with 'Windows' but I do not see why people are unhappy for support for it, if you hate Microsoft that is your own damn problem, don't take your damn iHate out on others just because your OS won't have a high market share. :whistle:

you should update your trolling handbook...

That's Windows 7 only. Also, can it open my ODF spreadsheet? Or my ODF presentation? No. It's also limited to the 1.1 specification, and has only partial support.

The first one has a price tag, and the second isn't a file system driver. It's a utility. It's also not included in Windows out of the box like NTFS is included in GNU/LInux.

That's Windows 7 only. Also, can it open my ODF spreadsheet? Or my ODF presentation? No. It's also limited to the 1.1 specification, and has only partial support.

Do you mean OpenOffice or Libre? That's not part of Linux, just happens to be bundled out of the box with a lot of distros. If we're adding 3rd party software, then yes, so can Windows.

  • Like 3

Do you mean OpenOffice or Libre? That's not part of Linux, just happens to be bundled out of the box with a lot of distros. If we're adding 3rd party software, then yes, so can Windows.

Every distro either comes with the Gnome office suite or Libre Office, so that's out of the box. The same as Wordpad on Windows. And even if you install Office 2010, it only supports version 1.1

One thing you're also overlooking, Flawed, is that anything that's in Windows is compatible with the 95% of other Windows machines in the world, so it basically has the highest compatibility, not the lowest. Someone sets up a committee and then says they should be the standard. :rolleyes: Well, too bad.

And, if you wanted to you can install the exact same program (Libre/Open Office) in Windows and have the same compatibility.

Every distro either comes with the Gnome office suite or Libre Office, so that's out of the box. The same as Wordpad on Windows.

You don't really need me to explain this to you do you? GNU/Linux? Linux being the kernel, GNU being the GNU toolset? Everything else being third party. It's out of the box for some distros, added by a distro, it is not part of Linux. I could just as easily re-master a Windows disc that has OO installed and claim its part of Windows. Legal? No, but it's exactly the same thing. It is as much a part of Linux as Wine isn't.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      471
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!