• 0

CSS: Image fixed at top?


Question

I'm trying to modify a WordPress theme (The Morning After) and I have an image that is set to [repeat-x top] and I want it to stay fixed so that no other images will appear over top of it or replace it. Ideally I'd like to have any images I upload for the background show up below the bottom of image I want to have fixed.

Any help is greatly appreciated. My current CSS is below:

body { background: #f8f8f8 url(images/headers/top-bg.png) repeat-x top; }

Example below:

unledty.jpg

Link to comment
https://www.neowin.net/forum/topic/997584-css-image-fixed-at-top/
Share on other sites

16 answers to this question

Recommended Posts

  • 0

Glen is right, you're going to need to fiddle with the z-index of both the body and the banner you're trying to keep fixed. The best thing to do is encase the banner in a div and create a background image inside that div.

The following should work:

body {
   background: url(whatever.jpg);
   z-index: 0;
}

#repeated-banner {
   background: url(repeated-banner-image.jpg) repeat-x;
   position: fixed;
   z-index: 1;
   height: 20px; /* Or however high you want it */
   width: 100%;
}

  • 0

Make a new Div, what you want to do isn't exactly possible, as the new background image you specify for the body will have to have some fake padding at the top. It won't automatically start below your banner.

#banner{
background: #f8f8f8 url(images/headers/top-bg.png) repeat-x top;
width : 100%;
height : 100px;
z-index : 10;
position : fixed;
top : 0px;
left : 0px;
}
body{
background: #f8f8f8 url(images/headers/top-NEWBACKGROUND.png) repeat-x 0px 100px;/*same PX as above*/
}

I haven't test this, I just wrote it out in the post editor. So check syntax if it goes wrong.

  • 0
  On 15/05/2011 at 21:02, lunamonkey said:

Do you want the second image to move when the user scrolls, or do you want it to be a fixed background?

Which of these is nearest? (ignore the file names)

http://lmky.co.uk/test/bottom-align-text-2.htm

http://lmky.co.uk/test/bottom-align-text.htm

http://lmky.co.uk/test/bottom-align-text-2.htm

That's essentially what I'm looking for. I want the top-bg image to span 100% width on the left and right of the header. Then I want a full bg image to start just below the to-bg, fixed. I'm just having a hard time getting both images to show up, let alone in the right places...

Again, i really appreciate the help guys.

  • 0
  On 15/05/2011 at 20:59, Elessar said:

Thanks for the input, CSS is definitely not my fort?. I've attached an image to the original post in hopes that it will help show just exactly what I'm trying to do. So far I've tried JAGFin1's code, no success yet though.

Right, I think I know what to do... I've just done a quick mock-up using background colours and Lorem Ipsum to test the scrolling and the position of the banner. This is the code I used:

<html>
   <head>
      <style type="text/css">
         body {
	    background-color: blue;
	    z-index: 0; /* Lowest index for the body and anything in it unless stated otherwise*/ 
	    margin: 0;
	 }

	 #scroll-header {
	    background-color: red;
	    position: fixed;
	    height: 200px;
	    width: 100%;
	    z-index: 1; /* Put it on top of the body */
	    top: 0; /* Make sure it is ALWAYS at the top */
	 }

	 #content {
	    margin-top: 200px; /* Content placed in this wrapper, with a top margin matching the height of the banner */
	}
      </style>
   </head>

   <body>
      <div id="scroll-header">
      </div>

      <div id="content">
         LOREM IPSUM WENT HERE.
      </div>
   </body>
</html>

The idea is to wrap all of the content on the page in a containing div as it gives you control over its position. The body is a BIG thing and you generally don't put raw content in it (without initially placing it inside another div). If you wrap all of your content in the #content div, you can make sure that it begins below the banner. When it scrolls, anything within the content div (with an index of 0) will scroll under it (because it has a lower index than the banner).

Give that a go and give me a shout if you have any problems, detailing what exactly went wrong. I understand that you're messing about with WP so it's a bit more difficult, but I've outlined the theory behind what you're trying to do.

  • 0

Whoa, that's a lot of code. So far I've been dabbling in the style.css, do I need to put the code above elsewhere? Like the header or something? If so, I'll need to be careful seeing as how this is a WP theme and messing something up in there could break the entire theme.

  • 0

I just added the code above to keep it together. I just looked at your example and can see what you're up to.

Basically, if you want to push the content of your page down so that it starts below the banner, you need to edit the CSS for the main container of content that WP uses. I'm sorry but I don't know what class that is, so you'll have to find it (or wrap all content in your own).

The basic principle relies on two things: the index of the banner, and the top-margin location of the content. If you look at my code, you'll see that #content has a top-margin: 200px. That matches the height of the banner, meaning that the content starts when the banner finishes. It's also important to make sure the banner has a top: 0; so that it explicitly starts at the top of the page.

The only thing you really need to be paying attention to is this:

#scroll-header {
   background: url(banner.jpg) repeat-x;
   position: fixed;
   height: 200px;
   width: 100%;
   z-index: 1; /* Put it on top of the body */
   top: 0; /* Make sure it is ALWAYS at the top */
}

#content {
   margin-top: 200px; /* Content placed in this wrapper, with a top margin matching the height of the banner */
}

It's no use relying on the body for moving content down as the banner is also part of the body, which encases everything on a web page. Like lunamonkey stated, you need to use divs in order to fix the positions of the conflicting objects.

Edit: I've just realised that lunamonkey has used a slightly different method to me. Swings and roundabouts I suppose.

  • 0

See, the problem is the ONLY thing I want to push below the top-bg is the background image. With what you posted above it sounds like I'll be pushing EVERYTHING content-wise below the top-bg which will throw everything that is currently in the header completely off...right? Is there anyway to use two images for the bg within the CSS, instead of hacking WP? I want to make sure upgrading WP for security fixes is as painless as possible.

  • 0

So, you're saying that you want the background image of the body to appear at a lower top-margin to the actual content of the body? Erm...

You'll probably want something like:

body {
   background: url(img.jpg) 0px 200px repeat-x;
}

That will repeat the background across the x-axis, and place it 200px from the top of the container.

You'll have to excuse the ambiguity, I'm quite tired!

  • 0
  On 15/05/2011 at 21:53, JAGFin1 said:

So, you're saying that you want the background image of the body to appear at a lower top-margin to the actual content of the body? Erm...

You'll probably want something like:

body {
   background: url(img.jpg) 0px 200px repeat-x;
}

That will repeat the background across the x-axis, and place it 200px from the top of the container.

You'll have to excuse the ambiguity, I'm quite tired!

No excuse needed, I'm extremely appreciative that people are taking the time to try and help a newb :)

  • 0
  On 15/05/2011 at 21:49, Elessar said:

Is there anyway to use two images for the bg within the CSS, instead of hacking WP? I want to make sure upgrading WP for security fixes is as painless as possible.

wordpress upgrades don't touch the themes. You can hack the themes all you like. As long as wordpress don't change the engine completely, but then that would break all themes.

  • 0

I was under the impression I'd have to hack a few of the WP files. So far no luck, granted I'm in no way a coder. Right now I'm trying to figure out how to make the background image work along side the top-bg image that spans the top of the page...all in CSS.

Now, one question I do have is the 'Background' option under Appearance in WP...where would I edit that file? Surely that is within the WP files themselves and not the theme, making me question if I could set some attributes there to make the background image I upload show up below any other images from the theme(s)...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I value a game as a whole including graphics. But going backwards in terms of graphics with a game I'm not already invested in (as in something I played and loved in the past and still do) is off-putting. Its a very poor demo trailer if they didn't crank the settings to max that would be ridiculous. Different strokes for different folks i guess, i'm not into slop the trailer and likely game could have been far better, it doesn't it instead looks like it was made on a shoe string budget or with lack of experience. But that could also be down to trying to get it running on low budget/outdated hardware and sacrificing the top end.
    • > Our goal is to ensure that the App Store remains an outstanding opportunity for developers and a safe, trusted experience for our users. There are so many scam apps on the platform that it is hard to believe they are truly interested in having a safe, trusted experience for their users.
    • Google announces upgraded Gemini 2.5 Pro model with enhanced capabilities by Pradeep Viswanathan Google today announced an updated Gemini 2.5 model with several improvements that can be observed in popular AI benchmarks. Google particularly highlighted that the new Gemini 2.5 Preview 06-05 "Thinking" model performs better in coding, math, science, and reasoning. Last month, during Google I/O, Google released an updated version of the Gemini 2.5 Pro model with significant improvements. Today's update builds on the release of the previous month with further enhancements. In addition to benchmark improvements, based on user feedback, this updated Gemini 2.5 Pro model also comes with improved style and structure, which will result in creative and better-formatted responses for end users. You can find the benchmark comparison with other leading AI models below. As you can notice in the above table, this updated Gemini 2.5 Pro preview model is now SOTA (State-of-the-Art) in coding benchmarks like Aider Polyglot. It also scored SOTA performance on GPQA and Humanity’s Last Exam (HLE) benchmarks, which test math, science, knowledge, and reasoning capabilities. In real-world testing, this latest 2.5 Pro model scored 24 points better on LMArena, maintaining its lead, and a 35-point jump on WebDevArena at 1443. Developers can access this latest Gemini 2.5 Pro preview model through the Gemini API via Google AI Studio and Vertex AI. General consumers will be able to access this model via the Gemini app. Google also confirmed that the Gemini 2.5 Pro model will be generally available in a couple of weeks, allowing developers to start using it in production-ready enterprise-scale applications.
    • The Bromance is definitely over! 🤣🤣🤣
    • I have the chance to live where electricity comes only from dams.
  • Recent Achievements

    • Week One Done
      jbatch earned a badge
      Week One Done
    • First Post
      Yianis earned a badge
      First Post
    • Rookie
      GTRoberts went up a rank
      Rookie
    • First Post
      James courage Tabla earned a badge
      First Post
    • Reacting Well
      James courage Tabla earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      418
    2. 2
      +FloatingFatMan
      181
    3. 3
      snowy owl
      178
    4. 4
      ATLien_0
      174
    5. 5
      Xenon
      135
  • Tell a friend

    Love Neowin? Tell a friend!