TiWorker/TrustedInstaller/WUDFHost/WMIADAP and WMIPRVSE running constantly


Recommended Posts

So are these supposed to be running constantly on Win8 Pro x64? Also, when these are running, I can also catch msiexec running also. I shouldn't think they would. But the last few days they have been. Maybe it's time for a reformat? Any ideas?

I have researched all of them and they seem legit:

One could be running because you have a portable Usb drive attached-

Visual Studio installed or a program that has it installed.

I would probably do a Windows Update then a reboot.

Another may be if you have Chrome installed -- I would go into the options and about then check it for updates- quite possibly the "trusted installer" may be that trying to update in the background.

"Maybe it's time for a reformat?"

So you have had the OS installed what 3 minutes, guess its time for a format :rolleyes:

Thanx for the blatantly uneeded, not to mention, unwanted, sarcasm. If you have nothing informative to add, you can just walk away. Thank you.

Thanx for the blatantly uneeded, not to mention, unwanted, sarcasm. If you have nothing informative to add, you can just walk away. Thank you.

This may sound crazy-- but I found another board that suggested these fixes.

Call up "services.msc" look for the ones dealing with the Windows Installer then stop the service as well as the WMI 's.

The WMI it suggested stopping and starting it.

It was also suggested to look for the c:\windows\prefetch then delete all that is in there and reboot-- "this may take some time for it to restart" (some may say this does nothing , but two people said it helped the process stop quicker after first install)

Those suggestions - I saw say fix 1/3-1/2 of the issues you described.

This may sound crazy-- but I found another board that suggested these fixes.

Call up "services.msc" look for the ones dealing with the Windows Installer then stop the service as well as the WMI 's.

The WMI it suggested stopping and starting it.

It was also suggested to look for the c:\windows\prefetch then delete all that is in there and reboot-- "this may take some time for it to restart" (some may say this does nothing , but two people said it helped the process stop quicker after first install)

Those suggestions - I saw say fix 1/3-1/2 of the issues you described.

Thanx redvamp. Will try that.

Edit:

Ok did the above. So far only wmiprvse has started up. Will see what happens and report back.

Thanx redvamp. Will try that.

Edit:

Ok did the above. So far only wmiprvse has started up. Will see what happens and report back.

One of the fixes said probably -- the installer itself never gave the successful termination and therefore keeps running... By stopping the service it won't start again until you install something. That will probably give a successful termination.

The Wmipvse - the suggestion of that restarting was that it would try again to finish successfully.

Other than doing a defragmentation (unless you have an SSD) I have not found much on the rest of the services.

One of the fixes said probably -- the installer itself never gave the successful termination and therefore keeps running... By stopping the service it won't start again until you install something. That will probably give a successful termination.

The Wmipvse - the suggestion of that restarting was that it would try again to finish successfully.

Other than doing a defragmentation (unless you have an SSD) I have not found much on the rest of the services.

I'm not sure when this actually started. But I'm thinking it was when I installed the Win8 app for The WB. So should I maybe try and uninstall that app and see what happens if the problem reoccurs?

I'm not sure when this actually started. But I'm thinking it was when I installed the Win8 app for The WB. So should I maybe try and uninstall that app and see what happens if the problem reoccurs?

Well if the application works-- I would not mess with it-- it is possible and is a common error with bad coded applications.... they don't tell the installer they are done and usually does not get cleared out until the next thing that is installed or a reboot.

Well if the application works-- I would not mess with it-- it is possible and is a common error with bad coded applications.... they don't tell the installer they are done and usually does not get cleared out until the next thing that is installed or a reboot.

Well, the app works for the most part. But when I try and watch a full episode of something, it actually takes over a minute for it to load the show and then stutters like Hell. So I haven't really used it.

Well, the app works for the most part. But when I try and watch a full episode of something, it actually takes over a minute for it to load the show and then stutters like Hell. So I haven't really used it.

I would probably look for some program options-- sometimes they have things like pre-loading or flash storage (if flash) usually through the right click. Either that or disk space usage.. sometimes if flash based you could go for the quality and set that to medium. In some cases that takes the skipping out.

I would probably look for some program options-- sometimes they have things like pre-loading or flash storage (if flash) usually through the right click. Either that or disk space usage.. sometimes if flash based you could go for the quality and set that to medium. In some cases that takes the skipping out.

Yea, they don't have any settings at all.

This topic is now closed to further replies.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!