iPhone 3.0 Firmware ready to be Unlocked and Jailbroken around release


Recommended Posts

As anyone reading this blog must already know, this is the big week where Apple releases their official 3.0 FW to the public (Wednesday), and then the new iPhone2,1 hardware, aka the iPhone 3GS (Friday).

On Tuesday evening (just before the big Apple release) we'll do a live demo of the yellowsn0w carrier unlock working on official 3.0 firmware. The actual link for the feed will be twittered by @MuscleNerd and also placed here when the feed starts. The demo should answer everything you need to know about the new yellowsn0w. But it's good news for iPhone 3G unlockers everywhere.

Meanwhile, we're in the middle of testing our PwnageTool and QuickPwn tools, which will work with iTunes 8.2. The jailbreak of course continues to work on 3.0 for all devices it ever worked on, thanks due the Pwnage 2.0 technique released last summer. Our tools will be released no sooner than the Apple release (just in case!).

P.S. For the new iPhone 3GS, please don't expect periodic updates about any progress we have or don't have. Nothing gives Apple the upper hand like someone tweeting or blogging partial hack results. That's not how cat & mouse is played :) That's how the cat gets fed.

ulc042608dr.png

Source: http://blog.iphone-dev.org/post/124232620/big-week

2.2.1 wasn't unlocked so all of you with piggyback sims can get ready to bin them! [or at least shelve them in case they're needed in the future]

Can't wait.

Iphone 3G arrived at 8:30am.

Gunna update later, and then ultrasn0w on Friday. Hopefully be able to use my three sim card :) , with 3G signal??.

If not, already ordered an O2 iphone sim card from ebay for ?2.99 which gives a year of internet for free:DD( after one ?10 topup).

Looks like I will have to wait until Friday for me to able to use 3.0 :(

However Im leaving for Edinburgh at 16.20 so I hope its out at about mid day, I can get it all installed and unlocked before I have to leave for the airport!

im hoping they release the JB before friday since i dont need ultra snow... now if apple can just officially release 3.0

JB is coming before then.

I think they actually confirmed today.

Update 2 (Thursday morning):

  • We have two issues that we've been trying to resolve:

  1. There are new 3.0 complications with YouTube.app if you're on a hacktivated (unofficially activated) device
  2. There's a bug in Apple's new version of asr that our custom IPSW's are tickling and causing crashes on, on some devices. (For the nerdy or curious among us, the details of that bug were tweeted by planetbeing a month ago.)

  • As of Thursday morning we now have a workaround for #2. For #1, we'll try our best to get it fixed but we may end up releasing a preliminary jailbreak in which YouTube doesn't work for hacktivated devices, and then follow that up with a more complete jailbreak when we can.


So, that means it will take more than the suppose Friday release? :rolleyes:

Friday is the release for ultrasn0w.

The update above is about the jailbreak which was suppose to happen shortly after 3.0 came out. They'll release it before/on friday, ultrasn0w needs a jailbroken iphone to work.

The only question to ask is will the Youtube bug be fixed for Friday or not...

Is ultrasn0w just for unlocking or unlocking and jailbreaking? Can you jailbreak OS 3.0 on an iPhone 3G with existing tools like PwnageTool or QuickPwn.

I don't personally give a rats ass about the YouTube bug, since the other one was fixed which was really important. I believe YouTube its not essential but then again i can't speak for all of you lads. I say let them do a prelinimary release today and then do a another release with YouTube bug being fixed.

Is ultrasn0w just for unlocking or unlocking and jailbreaking? Can you jailbreak OS 3.0 on an iPhone 3G with existing tools like PwnageTool or QuickPwn.

Ultrasn0w is for unlocking 3G only.

QuickPwn will be updated for jailbreaking 3.0 independently.

Is ultrasn0w just for unlocking or unlocking and jailbreaking? Can you jailbreak OS 3.0 on an iPhone 3G with existing tools like PwnageTool or QuickPwn.

Ultrasnow for unlocking Only. No, existing tools such as Pwnage Tool and QuickPwn will not work for the final 3.0 OS.

I don't personally give a rats ass about the YouTube bug, since the other one was fixed which was really important. I believe YouTube its not essential but then again i can't speak for all of you lads. I say let them do a prelinimary release today and then do a another release with YouTube bug being fixed.

I think the point is they're going to work on fixing it until the latest date they can release which is Friday. Ultrasn0w needs a jailbroken iPhone so if the youtube bug isn't fixed by then they'll probably do a preliminary release.

So for Ultrasn0w to work your phone needs to be JB first? PwnageTool or QuickPwn will need to be released first then? Are they due to be out tomorrow as well? I only want to JB not interested in unlocking (unless I flog me 3G on eBay and buy a 3G S. :p )

Yeah, they will probably do that. I think they are doing a brilliant job, not to mention its free of charge. I think for most people outside USA and UK, Ultrasnow its a miracle for them, i have been traveling around Europe and I'm bare ****ed using Rebel Simcard, they can be reliable but very unpredictable. So UltraSnow its a gift for my iTelefone so i can finally toss those Piggy Sims away or maybe just shelve them for future reference.

So for Ultrasn0w to work your phone needs to be JB first? PwnageTool or QuickPwn will need to be released first then? Are they due to be out tomorrow as well? I only want to JB not interested in unlocking (unless I flog me 3G on eBay and buy a 3G S. :p )

You need to do a JB in order to get Ultrasnow which its uploaded through Cydia.

1. QuickPwn or Pwnage Tool

2. PrisonBreak

3. For those not tied to a carrier will have to go on Cydia and download UltraSnow

4. For those who don't care about the unlock will stop giving a toss after number 2.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Dude, im talking about simply disable it from settings app. Because of the eu regulation, you could disable it here for years.
    • One big question about Mars was answered thanks to Einstein's 100 year old theory by Sayan Sen Image via DepositPhotos Scientists at the U.S. National Institute of Standards and Technology (NIST) have calculated how time passes on Mars compared with Earth, adding detail to how timekeeping would need to work beyond Earth’s orbit. The study, published in The Astronomical Journal, found that clocks on Mars run an average of 477 microseconds, or millionths of a second, faster per day than clocks on Earth. A microsecond is one millionth of a second, a very small unit used in precise scientific timing systems such as atomic clocks, which measure time using consistent atomic behavior. This difference is not constant. Because Mars moves around the Sun in a non-circular path (an eccentric orbit, meaning its distance from the Sun changes over time instead of staying fixed) and is affected by gravity from other bodies, the daily difference can vary by as much as 226 microseconds over a Martian year. The study also identifies smaller repeating changes of about 40 microseconds per day linked to synodic cycles (repeating periods that describe how planets line up with each other as they orbit the Sun from different positions). These longer patterns affect how time differences slowly rise and fall. To make these estimates, researchers compared Mars with Earth and the Moon. The work looks at relativistic proper time (the time actually measured by a clock depending on its speed and the strength of gravity where it is located, as described in Einstein’s relativity). This shows that each world has its own slightly different “rate” of time. This becomes more important as space missions expand into cislunar space (the region between Earth and the Moon) and toward Mars. On Earth, time systems rely on atomic clocks and satellites, which stay closely synchronized for navigation and communication. The study is based on Albert Einstein’s theory of relativity, which shows that time is affected by gravity and motion. Stronger gravity makes clocks run slower, while weaker gravity makes them run faster. “The time is just right for the Moon and Mars,” said NIST physicist Bijunath Patla. “This is the closest we have been to realizing the science fiction vision of expanding across the solar system.” A day on Mars is about 40 minutes longer than on Earth, and a Martian year lasts 687 Earth days. But the main question is not just about days and years, but how fast time itself passes. An atomic clock placed on Mars would function normally, but compared with one on Earth, the two would slowly drift apart due to differences in gravity and motion. This requires careful calculation of what is similar to a time-zone difference across planets. Researchers modeled Mars using a reference surface and included gravitational effects from the Sun, Earth, the Moon, and other planets. This includes a multi-body gravitational system (often described as a three-body or four-body problem, where predicting motion becomes difficult because multiple large objects all pull on each other at the same time through gravity). Mars also follows a Keplerian orbit (an idealized elliptical orbit based on simple gravitational laws that assume smooth motion, before adding real-world disturbances from other bodies). In addition, the researchers accounted for solar tides (small changes in gravitational force caused by the Sun that slightly distort planetary motion and timing, especially in systems involving Earth and the Moon). These combined effects are described as relativistic proper-time offsets (small but measurable differences in elapsed time between locations caused by gravity and motion), which must be included when comparing clocks across planets. “But for Mars, that’s not the case. Its distance from the Sun and its eccentric orbit make the variations in time larger. A three-body problem is extremely complicated. Now we’re dealing with four: the Sun, Earth, the Moon and Mars,” Patla explained. “The heavy lifting was more challenging than I initially thought.” Although the differences are extremely small, they matter for navigation and communication systems that depend on precise timing. Even modern networks on Earth, such as mobile systems, rely on timing accuracy at very small fractions of a second. Communication between Earth and Mars currently takes about four to 24 minutes or more depending on planetary positions, meaning signals are not real-time. A shared and accurate time system could help future missions reduce confusion in navigation and data exchange. “If you get synchronization, it will be almost like real-time communication without any loss of information. You don’t have to wait to see what happens,” Patla said. Researchers note that fully developed interplanetary communication networks are still far in the future. However, understanding how time behaves across planets helps prepare for those systems. “It may be decades before the surface of Mars is covered by the tracks of wandering rovers, but it is useful now to study the issues involved in establishing navigation systems on other planets and moons,” said Neil Ashby. “Like current global navigation systems like GPS, these systems will depend on accurate clocks, and the effects on clock rates can be analyzed with the help of Einstein’s general theory of relativity.” Patla added that the results also help improve understanding of time itself under relativity. “It's good to know for the first time what is happening on Mars timewise. Nobody knew that before. It improves our knowledge of the theory itself, the theory of how clocks tick and relativity,” he said. Source: NIST, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      458
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!