Recommended Posts

Hey everyone,

For some reason, after a first successful boot after installation (I had to do a full refresh to fix this problem the first time, because it went too far), it's come back again and I was wondering if anyone else has been having the same problem.

Basically, after the boot screen, the computer gets stuck on a black screen, sometimes with a cursor, usually without. Most times, putting the computer to sleep then waking it up again shows the cover photo, before being able to go to the login screen (as it should). This is a lot of extra effort to simply boot the computer.

However, if that doesn't work, after the black screen comes a white screen, then a new screen (with the cursor) and the background colour of my start screen.

I have a feeling this has got to do with drivers, but have no idea where to start to troubleshoot this properly.

I'm running this as the only operating system on my Dell XPS L502x (full specs here), after originally running the .exe downloaded from preview.windows.com, rather than an ISO.

Any help is greatly appreciated. I hope you guys are having more luck with the Consumer Preview. :)

Link to comment
https://www.neowin.net/forum/topic/1061520-cold-start-problems/
Share on other sites

So it seems the most likely cause is the graphics drivers.

I did a clean installation from a Windows 8 DVD, and rebooted repeatedly without problems. The moment I installed these drivers, and selected '3D Settings' in the Nvidia control panel, I got a BSOD. On next boot, I got the problem described above.

This means I can't play games! :(

Try re-installing the drivers. Do a custom installation and uncheck all the 3D Vision stuff and Nvidia Update. Be sure to check "Perform a clean install"

Alright, so I've done that. Now I have no boot problems, but still get a BSOD when trying to access the "Manage 3D Settings" (ie. defining GPU per program) page of the Nvidia control panel.

The error provided by the BSOD is IRQL_NOT_LESS_OR_EQUAL. Will check Event Viewer now.

It does, and I currently have the Microsoft WDDM 1.2 Intel HD Graphics drivers.

That might be your issue there. My guess is it's throwing a fit when switching from Intel to Nvidia.

I would try installing the latest drivers from Intel: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20842&ProdId=3231〈=eng&OSVersion=Windows%207%20(64-bit)*&DownloadType=Drivers

That might be your issue there. My guess is it's throwing a fit when switching from Intel to Nvidia.

I would try installing the latest drivers from Intel: http://downloadcente...oadType=Drivers

Installing now, I'll let you know how it goes.

Edit: "This computer does not meet the minimum requirements for installing the software."

Of course, but I never had any problems with Windows 7 6801, and that was a leaked build. Although, I had a completely different laptop.

when i tried to install this new cp from the .exe it told me my cpu wasnt qualified because it wasn't 1ghz or more.

i have an i7 2600k.

then i tried from an iso and it told me that i didn't have a 64 bit processor.

lots of tinkering and finally got it running. never had issues with the 7 previews/betas/leaks. but i didnt have the same system.

i hope you find your way, this is the best place to ask for help. (unless budman treats you like you're a total ******* like he always does.)

After a few hours of troubleshooting hoops, I finally have installed compatible Intel display drivers that fix the issue altogether. Damn system requirement checks made it all the more harder.

Thanks for the help David, really appreciate it.

After a few hours of troubleshooting hoops, I finally have installed compatible Intel display drivers that fix the issue altogether. Damn system requirement checks made it all the more harder.

Thanks for the help David, really appreciate it.

So, I've got the exact Same problem. I've got an xps 15z. What'd you actually do to get the intel driver to install? I can't get it to :/

So, I've got the exact Same problem. I've got an xps 15z. What'd you actually do to get the intel driver to install? I can't get it to :/

Try this for x64 and this for x86. As I said, it took a while to get working drivers.You want to try getting them off the Dell website too, rather than the Intel one.

The real pain about the Intel graphics drivers is the newer versions of the driver have a specification in the INF to NOT install on Windows 8. You can modify the INF but win 8 will spit the driver back because of an invalid hash. Only way around it is to modify the INF, disable driver signature enforcement for one boot, install the driver, and reboot.

  • 1 month later...

Hi all,

Have had many issues with this on my i7 2670QM Dell L1702X on 64bit. I tried all the drivers posted in this thread to no avail to see if one fixed my issues for good (Screen flickering, randomly not switching to HDMI out and metro apps going black/flickering -> login screen).

Have you tried the new Intel HD 2nd/3rd gen beta driver for Windows 8?

http://communities.i...om/thread/29226

So far so good, no Metro issues at least.

Hi all,

Have had many issues with this on my i7 2670QM Dell L1702X on 64bit. I tried all the drivers posted in this thread to no avail to see if one fixed my issues for good (Screen flickering, randomly not switching to HDMI out and metro apps going black/flickering -> login screen).

Have you tried the new Intel HD 2nd/3rd gen beta driver for Windows 8?

http://communities.i...om/thread/29226

So far so good, no Metro issues at least.

Since my recent reinstallation of Windows 8 I have not installed any video card drivers for my Intel GPU. Tonight I shall try the one you provided, thanks for that. :)

This topic is now closed to further replies.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!