Windows 8 & gaming: yes or no?


Recommended Posts

So basically it's just a matter of preference to have Windows 8 installed instead of Windows 7 on a gaming rig

(performance-wise is Win 8 slightly faster I guess)

Yup. Windows 8 is fractionally faster in some games, while some older games show some performance drops - there's no meaningful difference.

Eh? Been a long time since I used windows but back when I did (xp/7) I never really remember many game crashes at all.

The issue isn't necessarily game crashes - but crashes elsewhere (especially drivers) bringing either the game or the OS to a screeching halt.

As good as Vista and 7 (especially x64) are in this area, Windows 8 Pro (x64) is even better.

It was that particularly surprising discovery that had me do the entirety of my participation in the Diablo III and GW2 betas on Windows 8's Consumer and Release Previews (no Windows 7-based testing at all).

Stability FTW - and this is especially true if you are a gamer.

Crysis 2 doesn't work in DirectX 11 mode under Windows 8. The first run may work fine, but any further runs result in a weird wide window on the desktop, showing the game menu squashed in the center. When attempting to change resolution, the menu says "undefined". Pressing alt+tab takes you to full screen, but you get a very low resolution squashed game in the center. I don't think Crytek cares enough about Crysis 2 and/or Windows 8 to fix that. Bummer.

Crysis 2 doesn't work in DirectX 11 mode under Windows 8. The first run may work fine, but any further runs result in a weird wide window on the desktop, showing the game menu squashed in the center. When attempting to change resolution, the menu says "undefined". Pressing alt+tab takes you to full screen, but you get a very low resolution squashed game in the center. I don't think Crytek cares enough about Crysis 2 and/or Windows 8 to fix that. Bummer.

I think they launched an update to Crysis 2 in Windows 8... I only own Crysis 1 and Warhead on Steam so I can't confirm...

I think they launched an update to Crysis 2 in Windows 8... I only own Crysis 1 and Warhead on Steam so I can't confirm...

The issue was unique to the Preview versions of Windows 8 - I have a fully-updated Crysis 2 (1.9, DX11, and high-resolution texture patches) installed on my Pro x64 RTM Windows 8 and it runs just fine - albeit with a VERY hooptie (AMD HD5450 PCI-E for now) GPU (1280x720 @ 30 fps in DX11 High Settings) tag-teameed wwith a Q6600 and 4 GB of DDR2.

  • 2 weeks later...

Some games that used to crash if you ALT+TAB'ed out or WinKey out seem to resume now (Unsure if OS or GFX card drivers), otherwise it's the same thusfar.

Precisely, Aergan - Alt+Tab is a necessity if you ALSO have background tasks (such as IM clients or even Skype) running while you game. (And unless you are so obsessed that you kill every background task before launching a game, you WILL have background tasks, if not whole applications, running.)

Remember my mentioning that I'm running 8 Pro x64 on a Q6600, 4GB of DDR2, and an AMD HD5450? More often than not, I have a good dozen background tasks and applications - at minimum - running in addition to the game of the moment (something which would bring Windows 7 to a halt) - including both Yahoo Messenger and Skype (classic - not ModernUI).. Currently among those tasks are thirty-two tabs of Comodo Dragon, three of IE 10 desktop, Spotify, uTorrent, Kindle for Win32 Adobe Reader, and (as I said before) Yahoo Messenger and Skype for Win32. I have no qualms about merely switching away to play a game, because I know the OS can handle it.

THAT is stability, folks.

HD4000 performance in Skyrim in Windows 7 = 45FPS outdoors, on medium settings. Unbelievable performance for this card.

On Windows 8 = 25FPS outdoors.

Probably a driver issue, but for now, W7 is my choice.

HD4000 performance in Skyrim in Windows 7 = 45FPS outdoors, on medium settings. Unbelievable performance for this card.

On Windows 8 = 25FPS outdoors.

Probably a driver issue, but for now, W7 is my choice.

AMD only supports the HD5xxx series and above for Windows 8, so that could be a factor. More importantly, Skyrim is one of the easiest modern games to run - if you're getting less than 60fps at maximum settings then it's time to upgrade.

I will note that Crysis 2 works fine in DX11 mode on my 8 box now, so when or where or how it was fixed I do not know but it does work.

oops I guess that was covered already :)

I had some game issues (I assume DRM related) trying to run them from a Storage Space, but I just removed those (I wanted 8 on my newer+bigger SSD) and everything's working great.

AMD only supports the HD5xxx series and above for Windows 8, so that could be a factor. More importantly, Skyrim is one of the easiest modern games to run - if you're getting less than 60fps at maximum settings then it's time to upgrade.

Whoopsy. I mean... Intel HD 4000.

Tried Batttlefield 3 on Windows 8 and I went back to Windows 7. The performance is lower and it just doesn't feel and look right on Windows 8. Windows 7 drivers are more mature and the game simply performs better on Windows 7 - in my experience.

Also, I got sick and tired of Explorer crashing on Windows 8 for no reason whatsoever. Never happened on Windows 7, so back to Windows 7 for me.

Games simply crash less (far less) on Windows 8 than on earlier versions of Windows - even games that predate Windows 8 by several years.

Battlefield 3 crashes more on Windows 8 than on Windows 7.

Tried Batttlefield 3 on Windows 8 and I went back to Windows 7. The performance is lower and it just doesn't feel and look right on Windows 8. Windows 7 drivers are more mature and the game simply performs better on Windows 7 - in my experience.

Also, I got sick and tired of Explorer crashing on Windows 8 for no reason whatsoever. Never happened on Windows 7, so back to Windows 7 for me.

Battlefield 3 crashes more on Windows 8 than on Windows 7.

What are the hardware specs? Motherboard, CPU, CPU, RAM amount, etc. Also, the issues could well be driver-related (or even configuration-related). They could even be unique to your particular hardware configuration. (There are plenty of folks running BF3 on Windows 8 today - they couldn't do it if it were the game itself.)

This topic is now closed to further replies.
  • Posts

    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!