Recommended Posts

Welcome to the Neowin digital photo gallery! Here you can post your pictures and discuss your photography techniques.

Please be mindful of our members on dial-up and try to keep the dimensions of the pics and the size of the files to a respectable size for 1024 x 768 viewers. Please refrain from quoting images in your replies.

I will also ask that you link to images on your own space, as much as possible.

Try to put more details from your camera settings and also talk about what you have done with photoshop.

There are a lot of photographers here that like your editing skills and would like to learn more.

Thanks!

-------------------------------------------- copied from previous posts

2529366963_e5928766b5.jpg?v=0

2535307016_75931ea8d1.jpg?v=0

2537162325_2efef6c2ca.jpg?v=0

2539177307_822f7948a0.jpg?v=0

2539178085_b0efa3797f.jpg?v=0

2539183555_5a8e221e86.jpg?v=0

2540376800_ddb27dafd3.jpg?v=0

Link to comment
https://www.neowin.net/forum/topic/640519-neowin-digital-gallery/
Share on other sites

Do you like your tokina 28-70 f/2.6-2.8 o0moonman0o ?

Better than their f/2.8 old one (all metal) or better than the old 28-70 f/2.8 nikkor (called the beast)?. I wish I could get one here in Canada

the 2.6-2.8 is i believe is the metal one before the plastic versions after. it's sharpness at f2.8 is fine but u gotta avoid using it in scenes with strong highlights as theres blooming effect (sharp lines but with halo like blur around em) it's gone if u stop it to f4 (which u would if it's so bright) f2.8 is fine in low light shots, af is fine but slower than AFS ofcourse. other than that, it's pretty nice lens, if i didn't have 24-70L for my canon setup i would get nikon 24-70.

it's a discontinued model. Too bad, Tokina doesn't even have a distributor in canada

i think they have distributor now :D

Its usually a rule for me. If I pull an all nighter for homework ill make sure im done by 5:00 and then I'll go out and take pictures as a way for me to rid myself of stress and what not. Well, I pulled an allnighter lastnight and the same rule followed. I havent much time to upload a bunch but there was one picture i absolutly had to. this was the biggest sun I have ever witnessed:

sunrisere.jpg

2545605884_dbed688a39.jpg

Camera: Canon EOS Digital Rebel XT

Exposure: 0.006 sec (1/160)

Aperture: f/2

Focal Length: 50 mm

ISO Speed: 400

2545608066_151ae51d4f.jpg

Camera: Canon EOS Digital Rebel XT

Exposure: 1/3200 sec

Aperture: f/2.2

Focal Length: 50 mm

ISO Speed: 200

2545607534_1408199546.jpg

Camera: Canon EOS Digital Rebel XT

Exposure: 0.003 sec (1/320)

Aperture: f/2.2

Focal Length: 50 mm

ISO Speed: 200

2545606142_c40dcfd41d.jpg

Camera: Canon EOS Digital Rebel XT

Exposure: 0.003 sec (1/320)

Aperture: f/2

Focal Length: 50 mm

ISO Speed: 400

A few from today rest are on my Flickr.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!