Recommended Posts

Since two weeks my Windows Vista SP1 install randomly gives me a 0x0000001E BSOD after I log-on into the system. I tried to track the problem but I wasn't unable to determine its cause; Windows Vista Memory Diagnostics says that my 4gig of RAM are OK, and the same is with my Hard disks after I used SeaTools for Windows... At this point my doubts are on my ATI Radeon HD 3600 Series PCI-E card or on my Hauppauge HVR-3000 tuner card... Unfortunately in these weeks I just have the time to work at the PC two hours at night, so I can't really track down the problem.

Here you can find the details of Windows Error reporting tool:

Problem event name: BlueScreen

OS Version: 6.0.6001.2.1.0.256.1

Local ID info: 1040

More infos about the problem:

BCCode: 1e

BCP1: FFFFFFFFC0000005

BCP2: FFFFFA8006533AF0

BCP3: 0000000000000000

BCP4: 0000000000000038

OS Version: 6_0_6001

Service Pack: 1_0

Product: 256_1

Server info: a5da78d0-7e97-4bab-8a55-376d3ccc98fa

My specs:

CPU: Intel Core 2 Quad Q6600;

MOBO: Gigabyte GA-P31-D3SL with latest bios installed;

RAM: 4 GB Kingmax - Dual channel interleaved;

Video Card: ATi Radeon HD 3600 series;

Audio: SB Audigy 2 with latest driver release;

HD: Maxtor 6L160M0; Maxtor 6Y080P0; Maxtor STM3250820 AS; Seagate ST3500320 AS; Western Digital WDC2000JD-22KLB0;

Other: Hauppauge HVR-3000; XBOX 360 Wireless receiver for windows; MS Lifecam VX-3000; Netgear WG111v3;

Here you can also find attached the last and only minidump I have found... I'd be extremely grateful if someone can check it out and give me some details =).

Thanks in advance :)

Mini070908_01.zip

Link to comment
https://www.neowin.net/forum/topic/648122-unexpected-windows-vista-sp1-bsod/
Share on other sites

when you tested your ram did you do it one module at a time or all at once?idealy you should do 1 at a time,also do you have your vista install disk?if so run the startup repair and see what happens.also the BSOD your getting is KMODE_EXCEPTION_NOT_HANDLED & here is a link about it http://www.tek-tips.com/faqs.cfm?fid=730

hope this helps.

when you tested your ram did you do it one module at a time or all at once?idealy you should do 1 at a time,also do you have your vista install disk?if so run the startup repair and see what happens.also the BSOD your getting is KMODE_EXCEPTION_NOT_HANDLED & here is a link about it http://www.tek-tips.com/faqs.cfm?fid=730

hope this helps.

Thanks a lot for the link, it helped me to better understand the kind of kernel fault.

I didn't tested the single memory modules, and didn't tried a repair install, but I made a clean install just 3 days ago, and the problem appeared again :(

The problem is that the BSOD doesn't appear everytime I boot, but it comes randomly, so its causes are very difficult to reproduce.

Right now I'm trying to disable the all the BDA drivers of the Hauppauge HVR Card and see what happens; later I'll try to downgrade their driver version (or wait for a new driver that should be coming really soon), and then test the single memory module. I'll let you know the results.

In the meanwhile, if someone is able to analyze the memory dump and let me know what system module gets corrupted, let me know :)

sounds like a driver,also could you provide a screenshot of your running processes?

Sure :) When I'll be back home from work I'll make a screenshot of all the running processes. BTW disabling the Hauppauge drivers in the device manager applet didn't solve the problem... just yesterday night I had another BSOD just after logon... What a mistery :)

sounds like a driver,also could you provide a screenshot of your running processes?

Here you find attached a zip file containing a screenshot of all the processes running on my PC =)

"mystery"

Whops =) Sorry

I'm not sure about driver conflict... All my device drivers are the latest version available, and by reading user opinions on the web they all seems to be quite stable... BTW I'll check out again for newer and updated driver software releases... Thanks :)

BTW I changed the order of my RAM modules on the mobo, in these days I'll check if the system will remain stable after startup and I'll do another memtest... I'll let u know :)

AllUsersProcessList.zip

Hi, I've got the same BSOD randomly after logon. I'm not sure, but it seems to me that problem is in NOD32 or in ATi Catalist 8.6 driver... As I know NOD32 bild 667 was introduced eraly than Catalist 8.6 and with Catalist 8.5 the system was absolutely stable... but I'm not sure... I have BSOD since last days of June or early July 2008.

Have you any positive results after uninstall NOD32 and roll back to Catalist 8.5 driver?

Hi, I've got the same BSOD randomly after logon. I'm not sure, but it seems to me that problem is in NOD32 or in ATi Catalist 8.6 driver... As I know NOD32 bild 667 was introduced eraly than Catalist 8.6 and with Catalist 8.5 the system was absolutely stable... but I'm not sure... I have BSOD since last days of June or early July 2008.

Have you any positive results after uninstall NOD32 and roll back to Catalist 8.5 driver?

got the same issue i have EST3.0 (669) and ati 8.6

On my configuration I have not updated my Catalyst software (sticking with 8.5) because I was aware of the issues of the latest release. For people who have installed .6, I know for sure that now ATi has released a hotfix which was made for people with HD4800 series (but it works on every ATi card that the Catalyst suite supports), and is available here (just search in that page for "Radeon? HD 4800 Series Hotfix").

I wasn't aware of the 8.7 beta, so I don't know if it fixes the problem.

While Checking Wilders Security Forum (ESET official support forum), I found a thread in the NOD32 Antivirus section which describes all the issues that people are facing on startup since the .367 release (ESS has some BSOD problems on startup even since older releases). So, instead of installing KAV, I'm back with NOD32 Antivirus v. 3.650, which shouldn't cause any startup problem.

I 've visited ESET oficial forum, here is link on topic about our issue http://www.wilderssecurity.com/showthread....;highlight=bsod So we have software issue but I'm not sure it this NOD only problem, or specific driver version and concrete NOD version... Due to survey, I did not have problem with NOD build 677 and Catalyst 8.5 and Realtek Audio 1.93 under Vista 64 SP1...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If I ever get that issue I will let you know how I fix it
    • As I've been usually saying lately - we all can thank "AI" for this.
    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      540
    2. 2
      +Edouard
      186
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      Michael Scrip
      77
    5. 5
      Steven P.
      72
  • Tell a friend

    Love Neowin? Tell a friend!